1. TEAM: FIBREX Waterproofing Coating

2. Introduction  The ASTM Standard defines it is a treatment of a surface to prevent the passage of water under hydrostatic pressure.

3. Waterproofing with FIBREX  We produce excellent quality and durable elastomeric polymer modified waterproofing compound for providing external water proofing against moisture. As such, the range is highly utilized for water reservoirs, swimming pools as well as balconies. Our elastomeric polymer modified waterproofing compound is available for the clients at the market leading prices.  Features:  Two-component compound  Flexible waterproofing coating  Good elasticity for free movements  Shows impermeability under positive & negative loads

4. Waterproofing Products FIBLASTIC-PU FIBLASTIC PLASTER FIBWEATHER FIBSILICON-(WB/SB)

5. FIBLASTIC-PU Polyurethane Aliphatic Liquid Applied Membrane Description: - One component reactive liquid applied elastomeric membrane which can be sprayed or hand applied. Tensile Strength : >2.0 Mpa. Elongation : >350% Shore Hardness : (A):81 Peel Adhesion : 1.5 Mpa. Crack Birding : 2mm

6. FIBLASTIC-PU Coverage: - 1.9kg /m 2 for 1mm thickness. Features:-  Single Component  Slip Resistance  UV & weather resistance  No pre-striping of existing cracks required  Excellent wear resistance  Vapour Permeable membrane

7. FIBLASTIC PLASTER Elastomeric Waterproofing Coating Description: - Fiblastic Plaster is ready to use 2- component plaster based on cement with carefully graded aggregates in combination with selected admixtures & synthetic resins. Coverage: - 2.5kg /m 2 for 1.5mm thickness.

8. FIBLASTIC PLASTER Features:-  It can bridge Hair Cracks  Good elasticity takes care of expansion, contraction & other movements.  It is impermeable under positive & negative load

9. FIBWAETHER Liquid Applied Waterproofing Membrane Description: - Fibweather is a unique elastomeric high build coating based on a revolutionary acrylic polymer with quick-set capabilities to resist premature moisture attack. It provides durability, low temperature flexibility, excellent resistance to weathering and dirt pick-up. Coverage: - 400 gram /m 2 for 200 micron thickness.

10. FIBWAETHER Features:-  It provide a highly elastic, seamless film over metal, built-up roofing, new urethane foam & Concrete.  Heat Resistant & UV resistant.  Protects against mild acid & alkali fumes and most airborne chemicals.

11. FIBSILICON-(WB & SB) Colorless Water Repellent Surface Treatment WB- Water Based SB- Solvent Based Description: - FIBSILICON is a liquid compound which penetrates the pores of treated materials & provides a durable, invisible & highly effective water repellent film. Coverage: - 1 liter 5-6/m 2 depend on the porosity on the floor.

12. Application STEP 1 Remove dust, oil, remainders by using grinders and fresh water only. All substrate must be sound & clean STEP 2 Presence of holes to be cleaned & damped STEP 3 Filling of Holes with FIBPLUG. STEP 4. Honeycombing may be found by concrete pouring or pumping. STEP 5 Fill the honeycombing STEP 6 Damaged concrete

13. Application STEP 7 Fill the damaged area depending on the depth. STEP 8 Joint treatment – a joint between Vertical wall and ground must be Treated STEP 9 After surface treatment surface is ready for the application of the recommend product. Products will apply as per their recommend methodology.