Presentation is loading. Please wait.

Presentation is loading. Please wait.

The Miracle Coating! Polycoat 750D What is it?. Polycoat 750D is a pure sprayed, plural component elastomer. It provides a flexible, resilient, tough,

Similar presentations


Presentation on theme: "The Miracle Coating! Polycoat 750D What is it?. Polycoat 750D is a pure sprayed, plural component elastomer. It provides a flexible, resilient, tough,"— Presentation transcript:

1 The Miracle Coating! Polycoat 750D What is it?

2 Polycoat 750D is a pure sprayed, plural component elastomer. It provides a flexible, resilient, tough, monolithic membrane with good water and chemical resistance. It offers excellent abrasion resistant properties making it ideal for industrial or mining applications where constant abrasion is a concern. Polycoat 750D

3 Physical Properties of cured product Service temp.-50C to 200C. Shore hardness50D approx. Elongation % Tensile Strength2650 psi Tear Strength pli410 Abrasion Resistance, mg lost110 (100gms, 1000rev, H-18 wheels) Polycoat 750D

4 Some of the benefits of Polycoat 750D are:  It can be sprayed to any thickness in a single application  It can be handled or walked on in 30 seconds  It is 100% solids (0% VOC)  It has a service temperature from -50 to 200 C Polycoat 750D

5  Highly resistant to impact over wide temperature range.  Excellent abrasion resistance even at high temperatures.  Resistant to cracking under high flex conditions.  Resistant to water and a wide range of chemicals. Polycoat 750D

6 Chemical resistance tested against many corrosive and other reagents such as: Gasoline, Diesel Fuel, Motor oil, Hydraulic Fluid, Toluene, Xylene, Sulphuric Acid, HCl, Phosphoric Acid, Acetic Acid, NaOH, KOH, Salt, Sugar, Water. Polycoat 750D

7 SYSTEM 550D Faster cure Higher Impact resistance Higher Elongation Higher Abrasion resistance Low temperature curing Higher UV resistance Primary Differences EPOXY Lower cost

8 Some areas where Polycoat 750D was used:  Coating for steel or other substrate exposed to corrosion  Liner for concrete tanks, ponds, irrigation ditches, tunnels, barges  Coating inside silos for containment of coal, cement, chemicals. Polycoat 750D

9 Some areas where Polycoat 750D was used (cont) :  Earthen containment lining used with or without geo-textile  Encapsulation material for asbestos, or other dry hazardous materials  Truck bed and under-carriage liner Polycoat 750D

10 Some areas where System 750D was used (cont) :  Roof coatings for metal decks  Aircraft carrier decks, stairs, passageways  Airport fueling valve pits  Potting runway light fixtures on air strips  Rapid Runway Repairs Polycoat 750D

11 Some areas where System 750D was used (cont) :  Highway and bridge overlays  Lining of cement mixers, ready mix trucks and chutes  Sports Court and Skateboard ramp surfaces  Grouting for concrete floors  etc Polycoat 750D

12 Secondary Containment Petrol tanks Drilling platforms Pipelines Most Important Uses Runway Repairs Industrial plants

13 Polycoat 750D Storage tanks Oilfield compressors Chemical plants Fuel storage facilities High tensile strength and elongation plus resistance to a wide range of chemicals. Secondary Containment

14 Polycoat 750D Secondary Containment

15 Polycoat 750D Secondary Containment

16 Polycoat 750D Secondary Containment

17 Polycoat 750D FUEL TANKS Before

18 Polycoat 750D FUEL TANKS After

19 Polycoat 750D  Adds corrosion and abrasion resistance to pipeline exterior.  Can be used as a sacrificial coating to prevent costly damage during transport and installation. Pipelines

20 Polycoat 750D Runway Repair

21 Polycoat 750D  Offers excellent protective coatings on polyurethane foam roofs.  These reflective insulated roofing systems reduce heating and cooling costs.  Fast cure allows for quick installation and wider application window. Roofing

22 Polycoat 750D Roofing

23 Roofing

24 The ability to outlast paint and protect against corrosion and concrete spalling are major reasons it is being specified on bridges in more and more jurisdictions. Bridges

25 Polycoat 750D Bridges

26 Fast cure, rapid turnaround, corrosion resistance and washable surface make it the preferred option for plant maintenance. Food Processing Plants

27 Polycoat 750D Food Processing Plants Before

28 Polycoat 750D Food Processing Plants After

29 Polycoat 750D Food Processing Plants

30 Polycoat 750D Spraying Machine

31 Polycoat 750D Spraying Machine

32 Polycoat 750D Spraying Machine

33 Polycoat 750D Protecting the world


Download ppt "The Miracle Coating! Polycoat 750D What is it?. Polycoat 750D is a pure sprayed, plural component elastomer. It provides a flexible, resilient, tough,"

Similar presentations


Ads by Google