1. Managing Patch Edge Fuel Effects Fire Spread in a Fragmented Landscape By: Jacob J. LaCroix, Soung- Ryoul Ryu, Qinglin Li, Daolan Zheng, and Jiquan Chen

2. Introduction Forests are unique in overall structure –No two forests can be classified in the same way based on remote sensing The author decides on how to best represent a forest in a GIS model from the many natural and man made features –Usually depends on the variable one is interested in studying to determining which ones are okay to leave in or not include It would be nice to be able to identify the influence of a feature on the dependent variable

3. Introduction to CNF One of our primary study sites in Northern Wisconsin, Chequamegon National Forest –We have done both real field data collection and theoretic modeling with this site (Zheng and Chen 2000) and (Watkins et. al. 2002) Some things that we know about it are: –It is highly fragmented, heavily harvested and intensely used for recreation –Numerous small patches and edges dominate the structure of the forest Therefore with a fire spread study, edge fuel dynamics should influence fire fuel loading –Logical to try and consider its effects

4. Fire with Edges However, edges are not easy to quantify or model –Patch edge dynamics are essentially unique in space and time and we cannot measure every patch. Harper et al. (2005) synthesized edge literature, defined terms and encourage us to look at forest edge dynamics from a landscape perspective and with ecological processes that may be influenced by edges Examine fire spread in this way, in a WI landscape where the edge feature is strong

5. Landscape Approach Assigning all edge fuels together, given a range of low, medium and high fuel loading scenarios relative to the dominate classification of the current forest Allows us to keep the high connectivity of the feature in relation to other fuels on the landscape, which is important for fire spread and other processes such as plant and animal edge dynamics

6. Chequamegon National Forest Brush Red Pine Hardwood Slash Edge Water

7. Objectives To determine what impact fuels in edges will have on burned area and rate of spread To determine the level of landscape loading of the current classification without edges –Impact of the feature To make patch level inferences about other landscape features with high connectivity –Examples: Man made: roadsides, power line corridors, railroads, and hiking trails or Natural: timberline, meadows, and riparian zones. –If a majority of patches from those features were assigned to fuel loadings at a high, medium or low level based on the range of the current classification, what would be the result

8. Edge Assumptions Best based on newly created i.e. clear cut forest edges dynamics 75% of our landscape is forested fuel assignments –Helps infer what if a majority of patch assignments were low, medium or high in this edge structure.

9. Assumptions/Simplifications Freezes edge dynamics at one point in time Distance of Fuel Influence (DFI) set at 30m is likely smaller than the probable entire Distance of Edge Influence (DEI) –30m is subjective but is the smallest distance resolution of the model; okay fit from literature Equal on both sides of the edge Forms a uniform 60m belt or corridor on the landscape No gradient along the DFI We only manipulate fuel in the edge and not moisture or wind in the edge –One regional set of weather inputs applies to all

10. Justifications for Fuel Loading Scenarios At new forest edge creation: (Harper et al 2005) –Snags and logs from tree mortality/damage: increase fuel –Primary process responses Productivity increases: raising fuels Decomposition increases: lowering potential fuels –Primary structural responses Canopy cover, tree density and biomass decrease: decreases fuels Downed wood increases: increasing fuels –Secondary process response Recruitment, growth and mortality increase: increases fuels –Secondary structural response Sapling density, under story cover increase: increasing fuel HkjhkjKhkjhkjLjhlklkLjlkjlkLkjlkjllkjlkj

11. Methods FARSITE Model of fire spread based on CNF –5 layer GIS map, manipulated the fuel layer –Based on the current 4 fuel categories –Created 4 landscapes 1 - No edges assigned - 4 fuels 3 – Where same edge buffer was defined: 30m to either side of the edge –Absorbed all patches less than 60m in the 4 landscapes –3 custom fuels, with a range of loadings for forests, were placed into this edge area, one at a time –Giving each edge landscape 5 fuels –April 2004 Weather-no rain for a 7 day duration Eliminates the rain effect –16 systematic fire locations to represent the entire landscape

12. Visual Landscape Comparison Edge LandscapeNo Edge Landscape

13. Landscape Comparisons % Area in each classification Landscapes scenarios Anderson’s fuel model #’sCustom fuel model #’s Brush Red Pine Hardwood SlashLow Medium High 581011202122 Control No Edge Fuel24.514.552.58.5000 Edge Low Fuel Loading15.2 8.942.34.429.200 Edge Medium Fuel Loading15.2 8.942.34.4029.20 Edge High Fuel Loading15.2 8.942.34.40029.2

14. Fuel Assignment Comparison Model Fuel LoadingRate of SpreadFlame Length # tons/ac ft/min ft 1hr10hr100hr 5 Brush1.000.500.00 14.0 3.5 20 Low0.750.501.25 1.0 0.6 8 Red Pine1.501.002.50 2.2 1.1 21 Medium 1.460.200.07 4.9 1.6 11 Slash1.504.515.51 6.7 3.5 10 Hardwood 3.012.005.01 8.2 4.8 22 High 4.513.007.51 12.4 7.0

15. ANOVA Results SourceDFSum of Squares Mean Square F-Value P-value Model1817,880,234 993,346 34.34 < 0.0001 Error45 1,301,820 28,929 Corrected Total6319,182,054 R-Square = 0.932 Source DFANOVA SS Mean Square F-valueP-Value Landscape 314,238,072 4,746,024 164.06< 0.0001 Location 15 3,642,162 242,810 8.39< 0.0001

16. Results

17. Rate of Spread of all Landscapes

18. Results

19. Conclusions Patch edge fuels influence the rate of fire spread and improve our classification accuracy current classification is equivalent to a landscape loading that produces rates of fire spread and flame lengths between medium and high-level edge loading scenarios This data allows us to predict what may happen if similar or more landscape features with high connectivity are included in fuel classification, when fire encounters it Managers can use this information to control fires by altering fuel in edges during normal harvesting operations

20. Acknowledgments Funding provided by the Joint Fire Science Project LEES Lab Questions