2. Work, Power, & Machines

3. What is work ?  The  The product of the force applied to an object and the distance through which that force is applied.

4. Is work being done or not?  Mowing  Mowing the lawn  Weight-lifting  Moving  Moving furniture up a flight of stairs  Pushing  Pushing against a locked door  Swinging  Swinging a golf club  YES  NO  YES

5. Calculating Work All or part of the force must act in the direction of the movement.

6. Do you do more work when you finish a job quickly?  Work does NOT involve time, only force and distance.  No work is done when you stand in place holding an object.  Labeling work: w = F x d  Newton X meter (N m)  Which also = (kg x m 2 ) s 2 s 2

7.  How quickly work is done.  Amount of work done per unit time.  If two people mow two lawns of equal size and one does the job in half the time, who did more work?  Same work. Different power exerted.  POWER = WORK / TIME

8. The watt  A  A unit named after Scottish inventor James Watt.  Invented  Invented the steam engine.  P  P = W/t  Joules/second  1 watt = 1 J/s

9. watts  Used to measure power of light bulbs and small appliances  An electric bill is measured in kW/hrs.  1 kilowatt = 1000 W

10. Horsepower (hp) = 745.5 watts  Traditionally associated with engines. (car,motorcycle,lawn-mower)  The term horsepower was developed to quantify power. A strong horse could move a 750 N object one meter in one second. 750 N

11. Machines  A device that makes work easier.  A machine can change the size, the direction, or the distance over which a force acts.

12. Forces involved:  Input Force FIFIFIFI  Force applied to a machine  Output Force FOFO  Force applied by a machine

13. Two forces, thus two types of work  Work  Work Input work work done on on a machine =Input force x the distance through which that force acts (input distance)  Work  Work Output Work Work done by by a machine =Output force x the distance through which the resistance moves (output distance)

14. Can you get more work out than you put in?  Work output can never be greater than work input.

15. Mechanical Advantage (MA) – expressed in a ratio WITH NO UNITS!!  The number of times a machine multiplies the input force.

16. 2 types of mechanical advantage  IDEAL  Involves no friction.  Is calculated differently for different machines  Usually input distance/output distance  ACTUAL  Involves friction.  Calculated the same for all machines

17. Different mechanical advantages:  MA  MA equal to one. (output force = input force)  Change  Change the direction of the applied force only.  Mechanical advantage less than one  An  An increase in the distance an object is moved (d o )

18. Efficiency  Efficiency can never be greater than 100 %. Why?  Some work is always needed to overcome friction.  A percentage comparison of work output to work input.  work output (W O ) / work input (W I )

19. 1. The Lever  A bar that is free to pivot, or move about a fixed point when an input force is applied.  Fulcrum = the pivot point of a lever.  There are three classes of levers based on the positioning of the effort force, resistance force, and fulcrum.

20. First Class Levers  Fulcrum is located between the effort and resistance.  Makes work easier by multiplying the effort force AND changing direction.  Examples:

21. Second Class Levers  Resistance is found between the fulcrum and effort force.  Makes work easier by multiplying the effort force, but NOT changing direction.  Examples:

22. Third Class Levers  Effort  Effort force is located between the resistance force and the fulcrum.  Does  Does NOT multiply the effort force, only multiplies the distance.  Examples:

23. Levers!!!!!!!!!!!

24. Mechanical advantage of levers. IIIIdeal = input arm length/output arm length iiiinput arm = distance from input force to the fulcrum ooooutput arm = distance from output force to the fulcrum

25. 2. The Wheel and Axle  A lever that rotates in a circle.  A combination of two wheels of different sizes.  Smaller wheel is termed the axle.  IMA = radius of wheel/radius of axle.

26. 3. The Inclined Plane  A slanted surface used to raise an object.  Examples: ramps, stairs, ladders  IMA = length of ramp/height of ramp Can never be less than one.

27. 4. The Wedge  An inclined plane that moves.  Examples: knife, axe, razor blade  Mechanical advantage is increased by sharpening it.

28. 5. The Screw  An inclined plane wrapped around a cylinder.  The closer the threads, the greater the mechanical advantage  Examples: bolts, augers, drill bits

29. 6. The Pulley  A chain, belt, or rope wrapped around a wheel.  Can either change the direction or the amount of effort force  Ex. Flag pole, blinds, stage curtain

30. Pulley types FFFFIXED CCCCan only change the direction of a force. MMMMA = 1 MMMMOVABLE CCCCan multiply an effort force, but cannot change direction. MMMMA > 1

31. MA = Count # of ropes that apply an upward force (note the block and tackle!) Fe

32.  A combination of two or more simple machines.  Cannot get more work out of a compound machine than is put in.