1. EtherNet/IP Profile Switch Sales Presentation

2. OpenRail
One platform, one thousand possibilities

3. Open Rail Overview
Managed switch family – available as RS (rail switch) or MS (modular switch)
Rail Switches available with 4, 8, 16 or 24 ports
RS20 – all ports are 10/100mbps
RS30 – 2 additional gigabit ports (total of 10, 18 or 26 ports)
RS40 – all gigabit ports
Modular Switches available with 8, 16 or 24 ports
MS20 – all ports are 10/100mbps
MS30 – adds 1 slot for 2 gigabit ports (total of 10, 18 or 26 ports)
Many different media modules available

4. What is the EtherNet/IP Profile Switch?
A new firmware (version 3.0) puts EtherNet/IP functionality into all managed Open Rail switches (RS20/30/40 and MS20/30)
Functionally, nothing in the switch changes – this is just an added feature
This allows users to integrate the switch directly into the RSLogix5000 I/O tree
This makes it much easier for customers to configure and monitor their managed switches
Integrating this information into an HMI is easier than ever before
Generating network alarms becomes simple
All existing Open Rail switches can be flashed up to this firmware level (send an to
Nothing special to order – it’s embedded in every switch
Available in March
Sample files for RSLogix5000 and RSView Studio can be found at (search Title – Hirschmann) or at ftp.hirschmann-usa.com/EthernetIP

5. Screenshot from RSLogix5000 sample file
Hirschmann Add-On Instruction (v16 required)
Switches in the I/O tree

6. Screenshots from sample RSView Studio file
Main switch screen
Templates are available for various switches
Diagnostics screen

7. Port Enable/Disable screen Switch information screen
IGMP Config screen
Port information screen

8. One more thing…
It’s free!
There is no additional cost for this functionality. If you buy the switch, it’s there. If you already have a switch, just download and install the firmware.

9. Available Resources Sample files EtherNet/IP Step by Step presentation
(Search Title – Hirschmann)
ftp.hirschmann-usa.com/EthernetIP
EtherNet/IP Step by Step presentation

10. Additional Technical Information
3.1 release (June) will add support for MACH, PowerMICE and Octopus switch families
Other protocols are supported
ProfiNet at 3.0 release
ModBus TCP – future release
Sample files make use of the Add-On Instruction feature in RSLogix5000, which requires version 16
Version 16 is not required for the EtherNet/IP functionality to work – only to take advantage of our samples

11. Another New Offering: -E Firmware
-E is ideal for customers who want some features of managed switches (IGMP Snooping, etc.) but don’t want to have to configure the switch
A switch with –E firmware has different factory default settings so that it can be installed in most EtherNet/IP applications with no configuration
Good for small, isolated networks
All management features are still available, -E just changes some factory defaults so management may not be required

12. -E Settings These settings are factory default for the –E firmware
IGMP Snooping – Enabled (version 2)
IGMP Querier Mode – Enabled
EtherNet/IP – Enabled
IP address via DHCP
Address Conflict Detection – On
Dip switches are physically set so that they are disabled (all configuration done via software)
RSTP – Off
All TX ports set to Autonegotiate
***These are the settings that are changed from standard factory default***

13. Questions???