1. Design for 3D Printing

2. Cody Wilson -Arkansas

6. Water bottle holder for my recumbent bicycle's oval shaped frame. Replacement for the plastic table clamp of an old Luxo lamp Replacement plastic foot for a camera tripod Extension for my mouse to make it large enough for my hand Z shaped key for an antique Chinese brass lock

11. Material extrusion Material jetting Binder jetting Sheet lamination printers Vat photopolymerization Powder bed fusion Selective Laser Sintering (SLS) Selective heat sintering (SHS) Direct Metal Laser Sintering (DMLS) Directed energy deposition

13. File sizes  50 to 64 MB, and a polygon count limit of 500,000 polygons Polygon sizes  Small enough to make smooth surfaces  Not too small, makes work for the printer, minimum detail size printer can handle Modeling Precision  In 3D design packages, you can have exact fit. 3D printers may not print exactly what you have designed.

15. Acrylonitrile Butadiene Styrene (ABS) Polylactic acid (PLA) Aliphatic polyamide (nylon) Polyethylene terephthalate (PET) LAYWOO-D3 Photopolymers Metal Food Cells

22. Watertight

23. Manifold A manifold vertex is one that is connected to another vertex by an edge A manifold edge is one that has exactly two polygons associated with it

24. A vertex without an edge An edge without a polygon An edge from a polygon to a single vertex An edge between vertices of two different polygons, but not associated with any polygon Non-manifold edges surrounding a polygon (the polygon may be unneeded) Two vertices that are very, very close together and have separate edges when they should be in the same location and share edges, so they leave a tiny hole in the surface A missing polygon causing a hole in the surface

25. Non-contiguous faces

26. Degenerate geometry: With faces that have no area and edges that have no length. Distorted geometry: It has faces that are not flat. Improper thickness: It has walls that are too thin.. Too sharp: It has edges that are too sharp, and will not print correctly, or the object may break during or after printing because it is too thin and fragile. Too much overhang: It has polygons that do not have Supports.

27. Wall Thickness

29. Dyeing and Painting