Presentation is loading. Please wait.

Presentation is loading. Please wait.

RESTORE: ACL instruments. Tibial tunnel Tibial Guide Designed for the precise placement of the femural guide-wireDesigned for the precise placement.

Similar presentations


Presentation on theme: "RESTORE: ACL instruments. Tibial tunnel Tibial Guide Designed for the precise placement of the femural guide-wireDesigned for the precise placement."— Presentation transcript:

1 RESTORE: ACL instruments

2 Tibial tunnel

3

4 Tibial Guide Designed for the precise placement of the femural guide-wireDesigned for the precise placement of the femural guide-wire Two points on the tibial plateauTwo points on the tibial plateau Stable blocking systemStable blocking system Clear angle scaleClear angle scale

5 Tibial Guide

6 Guide placementGuide placement

7 Tibial Guide Guide placement: 45°-55° angleGuide placement: 45°-55° angle

8 Tibial Guide FeatureBenefit Two points of fixationStability RatchetOne hand set-up Clear scaleEasy to identify angles

9 Tibial tunnel

10 Fully fluted reamer Designed for creating the tibial tunnelDesigned for creating the tibial tunnel The grooves on the rod for collecting bone chipsThe grooves on the rod for collecting bone chips Every 10 mm notchesEvery 10 mm notches Diameters:Diameters: –6, 7, 8, 9, 10, 11, 12, 13 mm

11 Fully fluted reamer

12 FeatureBenefit Flutes channelCollect bone for fullfill holes Full thicknessLess tibial tunnel divergence

13 Femoral tunnel

14 Femural aimers Designed for a perfect placement of the femural guide-wireDesigned for a perfect placement of the femural guide-wire They prevent the backwall breakageThey prevent the backwall breakage Every 10 mm notchesEvery 10 mm notches 4 Offset:4 Offset: –5, 6, 7, 8 mm

15 Femural aimers

16 Offset obtained by an easy formulaOffset obtained by an easy formula OFFSET = OFFSET = Tunnel diameter /2 + Wished thichkness* *Usually 1 or 2 mm

17 Femural aimers FeatureBenefit 2-3 mm OffsetAvoid backwall break out Graduate lenghtDetermine tunnel lenght Handle with finger-holePrevent instrument slippage

18 ACL instruments

19 Acorn reamer Designed for creating the femural tunnelDesigned for creating the femural tunnel Thin shaft for increasing manipulationThin shaft for increasing manipulation Every 5 mm notchesEvery 5 mm notches Diameters:Diameters: –8, 9, 10, 11, 12, 13 mm

20 Acorn reamer

21

22 FeatureBenefit Thin shaftEasy removal from tunnels Clear scaleEasy to read increments Sharp tipEasy to use

23 Back cutting burr You can clean and chamfer the tibial tunnelYou can clean and chamfer the tibial tunnel Cannulated for better useCannulated for better use

24 Graft sizer: 8-12 mm To determine the diameter of the graft (BTB or ST)To determine the diameter of the graft (BTB or ST) Plastic device with channels of different diameters: 8, 9, 10, 11, 12 mmPlastic device with channels of different diameters: 8, 9, 10, 11, 12 mm 8 9 10 11 12

25 ACL graft knife Twin scalpel bladesTwin scalpel blades For ACL BTB graftFor ACL BTB graft Available in:Available in: –8, 9, 10, 11, 12 mm Color codedColor coded

26 ACL graft knife FeatureBenefit Sterile, disposable instrument Guaranted sharpness for each procedure Parallel knife bladePrecise cutting of the patellar tendon graft Color coded sizingEasy to identify sizes

27 Pig Tail Tendon peeler Harvesting of semitendinosus and gracilis tendons Open “pig-tail” ring

28 Pig Tail tendon peeler FeatureBenefit Stainless steelLong-lasting Solid handle and shaftReleable Slotted endEasy entry and removal of tendon

29 TARGET Tendon harvester Harvesting of semitendinosus and gracilis tendons Gun-shape

30 TARGET Tendon harvester FeatureBenefit Stainless steelLong lasting, releable Long calibrated shaftDesired graft lenght measurements Cylindrical closed cutting tip Precise, controlled graft harvest tracking without laceration


Download ppt "RESTORE: ACL instruments. Tibial tunnel Tibial Guide Designed for the precise placement of the femural guide-wireDesigned for the precise placement."

Similar presentations


Ads by Google