We think you have liked this presentation. If you wish to download it, please recommend it to your friends in any social system. Share buttons are a little bit lower. Thank you!
Presentation is loading. Please wait.
Published byGrayson Gloss
Modified about 1 year ago
Sirus® Intramedullary Nail Workshop Cat. No.Description 102.00020.0372.0mm x 440mm Guide Wire (x3) 202.00020.031Target Device for Femur 302.00020.033Targeting Module for Cervical Screws 402.00020.034Screw for Target Module 502.00020.0368.0/2.0mm Drill Guide 602.00020.038Measuring Device for Cervical Screws 702.00020.016Cannulated Awl, 13mm 802.00020.0396.5/4.5mm Step Reamer, Cannulated Top Tray 1 2 3 4 5 6 7 8
Sirus® Intramedullary Nail Workshop Middle Tray 1 2 3 4 5 6 7 8 9 10 11 Cat. No.Description 102.00020.0423.0mm x 365mm Guide Rods w/Threaded Tip 202.00020.001Cannulated Awl, 10mm 302.00020.013Tissue Protection Sleeve, 10mm 402.00020.051Tissue Protection Sleeve, 12mm 502.00020.04911mm Ratchet Wrench 602.00020.003Locking Bolt for Targeting Guide 702.00020.005Tissue Protection Sleeve 802.00020.0068mm Trocar 902.00020.0078.0/4.0mm Drill Guide 1002.00020.002Targeting Device for Tibia 1102.00020.00445 Degree Tibial Targeting Arm
Sirus® Intramedullary Nail Workshop Bottom Cat. No.Description 102.00020.0104mm Three-Flute Drill Bit 202.00020.048Tissue Protection Sleeve Tibia, 12mm 302.00020.012Large Hex Screwdriver, 3.5 x 340mm 4110.45.031Ram 502.00020.047Driving Head 6100.90.500Universal Chuck 702.00020.0544.0mm Three-Flute Drill Bit w/QC 802.00020.0712.0 x 440mm Guide Wire for Cap Screws 902.00020.046Ram Guide 1 2 3 45 6 7 8 9
Sirus® Intramedullary Nail Workshop Cat. No.Description 102.02652.238Femoral Nail, 12mm x 380mm Lt 202.02631.038Tibial Nail, 10mm x 380mm Lt 302.03650.097Cap Screw for Femoral Nail, 5mm 402.03630.040Cap Screw for Tibial Nail, 5mm 502.03630.039Cap Screw for Tibial Nail 1 2 345 Cat. No. Description 1 02.03100.068 Cervical Screw, 6.5 x 95mm Cann 2 02.03149.090 4.9 x 90mm Interlock Screw, Self Tap 3 02.03149.080 4.9 x 80mm Interlock Screw, Self Tap 4 02.03149.046 4.9 x 46mm Interlock Screw, Self Tap 5 02.03149.036 4.9 x 36mm Interlock Screw, Self Tap 1 2 3 4 5
Trabecular Metal™ Reverse Shoulder Instruments Cat. No.Description Base Plate Drill, 7.5mm Cortex Drill, 7.5mm Compression.
3 Triology® Acetabular System Workshop Case 1 Cat. No. Description Tibial Alignment Rod Cup Positioner Gunsight.
NexGen® LCCK 4in1 Workshop Cat. No. Description Screw Inserter Hex Pin Driver/Extractor Femoral Augment Screwdriver.
Cat. No. Description mm I/M Drill w/stop Bone Screw Drill CRA/LCCK Rev. Fem. Stem Drill Hinge.
NexGen® Knee Revision Workshop Cat. No. Description
MIS Uni EM/IM Knee Workshop Cat. No. Description Universal File IM Knee Drill, 8mm Dia Drill Blue, 3.2mm
5-in-1 Knee Workshop Top Tray Cat. No. Description IM Femoral A/P Sizing Guide MICRO-MILL® Driver Adjustable IM.
Mini 4-in-1 Knee Workshop Cat. No. Description lb Mallet Locking Impactor/Extractor Universal Handle
Cat. No. Description Ankle Clamp Distal Telescoping Rod Spike Arm Telescoping Rod Tibial Depth Resection.
ZPS/ Peri II Workshop Cat. No. Description Reduction Forceps, w/serrated Jaws, 145mm Reduction Forceps, Narrow, Serrated w/points,
Natural Knee® II Workshop Cat. No. Description IM Tibial Alignment Guide Tibial IM Rod Modular Tibia Drill guide.
Mini IM Knee Workshop Cat. No. Description Spike Arm Rod Spike Arm LPS Articular Provision, CD 5-6/Str Green 10.
Zimmer Unicompartmental Knee Workshop Cat. No. Description Alignment Rod w/Coupler Alignment Rod /4mm Tibial.
Orthopaedic Trauma Association Protection and/or confidentiality of contents statement, this statement may also include a corporate copyright notice. Intro.
Implants & Instruments for Large External Fixation.
Procedures Basic Format ORIF Femur (Femoral Shaft) Level II.
STIF INTRA ARTICULAR CCL RECONSTRUCTION STIF CCL ligaments are different for Right or Left joint to respect physiological torsion. Recommended Ligaments.
1.a. Item has external threads Go to 2 (screws) b. Item has no external threads Go to 7Go to 2 Go to 7.
Tool Classification. Categories of Tools 1.Layout tools 2.Cutting tools 3.Boring tools 4.Driving tools 5.Holding tools 6.Turning tools 7.Fasteners.
Safety, Tools and Equipment, Shop Practices Tools and Equipment.
Objective 6.03 Remember tools and their safety practices related to the agricultural mechanics industry.
Hole Types & How To 4 main types of holes: Clearance Hole Tapped/Threaded Hole Countersunk Hole Counterbored Hole.
TOOL IDENTIFICATION FFA CAREER DEVELOPMENT EVENT Part 3.
Description of Hand Tools Tools help us do work and make things. Tools.
Helicoil installation on MB GPW L134 block. I had a miss, possible valve sticking, or worse, in my engine. The middle head bolt on the left hand side,
Ratchet Screwdriver Contents 1 x ¼” Dr. & Hex 45T ratchet screwdriver 1 x ¼” Hex 150mm extension bit holder 6 x ¼” Hex 25mm bits, Clip-on End-cap:
Session VIII Fixation Devices Casts are stress sharing Pins, screws, Steinman pins and Kirschner wires when used alone provide partial immobilization and.
6.03 Tools in Agricultural Engineering Obj. 6.03: Remember tools and their safety practices related to the agricultural mechanics industry Images courtesy.
Main Parts of a Drilling Machine. Drill Types and Holding Methods Parallel shank drills as the name suggests have a parallel shank and are held in the.
Module 12 RESTORE RESTORE ® External Hex Implant System Surgical Hands-On.
ZPS Foot and Ankle Display Mini & Small Fragment Plates Cat. No. Description One-Third Tubular Plates Hole, 145mm (x2)
Rigid Intramedullary Nailing of Femoral Shaft Fractures in Skeletally Immature Patients Using a Lateral Trochanteric Entry Portal by Elliott J. Kim, Samuel.
Tool Identification Tool Identification and Use as Photographed and Prepared by Doug Best.
Model 12 Intek Horizontal OHV Head Removal and Replacement Lab #5.
Tool Identification. Identify this Tool: Channel Lock Pliers.
Tray Tools, Materials & Processes. The Pillar Drill can be used to drill wood, metal, and plastic. As a general rule the larger the hole you are trying.
Copyright © 2010 Delmar, Cengage Learning. ALL RIGHTS RESERVED. Unit 7 Hand Tools, Fasteners, and Hardware.
Removing the Femoral Head Once the hip joint is entered, the femoral head is actually dislocated from the acetabulum and the femoral head is removed by.
Tool Identification A guide to the identification of Hand Woodworking Tools.
Tools MVRT Season. Overview Design –Combination Square –Caliper Fabrication –Hacksaw –File –Drill –Sandpaper/Steel Wool –Shears Assembly –Allen.
The Sodem® Power System “Plus” For Large Bone Surgery More power to spare for demanding orthopedic procedures: Three Power Sources: Battery, Electric,
Hand Tool Identification Agriscience Technology Mr. Gibson.
Verigy V93000 Service Training Module 26: System Maintenance.
© 2011 Pearson Education, Inc. All Rights Reserved Automotive Technology, Fifth Edition James Halderman FASTENERS AND THREAD REPAIR 8.
Tool Identification. TURNING TOOLS Turn nuts, bolts, and screws.
Tool Identification AG STRUCTURES. Terms Tools-any instrument used in doing work Hand tool- any tool operated by hand to do work Power tool- operated.
Wood Chisel. Flat file Half round file Round file.
DuringLCA reconstruction Resorbable transcondylar system for femoral fixation.
Mrs. Larkin. X- Acto Knife Used for cutting balsa wood, foam board, or paper.
© 2017 SlidePlayer.com Inc. All rights reserved.