1. WELCOME to

2. Production activities Centralized Dimming System (CDS)
Ballast (HID & FL)
Centralized Dimming System (CDS)
Ignitors (HID Lamps)

3. History of EITA Technologies
1995
SAFER Asia was incorporated
1997
SAFER Asia took over the mfg & distribution of REFAS products
1970’s
SAFER Manufacturing Co. – start manufacturing of REFAS ballast
2005
SAFER Asia changed it’s name to EITA Technologies (M) S/B.
Appointed as sole distributor for STUDER Cable
1997
Joint Venture with EITA –
Promote & Expand REFAS products in Malaysia
2002
SAFER Asia became a wholly owned subsidary of EITA Group of Companies
2001
SAFER Asia was awarded the ISO9001:1994 QMS certification by LRQA LLoyd

4. ETM’s Business Segments
One of the leading manufacturer of lighting ballast and component in Malaysia Product is known for it’s quality ,reliability and energy efficiency Reputation of our brand REFAS is because of our commitment towards quality Commitment to our Quality Management System
Our business today includes the following range of product:
Low Loss Ballast
Energy Saving System
Electronic Product
Low Loss Ballast for HID Lamps
Low Loss Ballast for FL
CDS – Centralized Dimming System
Dimming Ballast
Electronic Ballast for FL
Electronic Ignitors
Power Switches

5. Electronic Products
Electronic Ballast for T8,T5 & CFL lamps For lamps rating of 14W – 58W Tested and comply to IEC 61437, 60929, 6100 & EN Approved by ST & JKR
For High Intensity Discharge lamps (Sodium & Metal Halide) For lamps rating of 70W – 1000W Low power losses < 3W Auto switch off function for end of life cycle Tested and comply to MS IEC 61347, & 60529

6. Low Loss Ballast for HID
Low Loss Ballast for FL
For T10 & T8 Fluorescent lamps lamps rating of 13W – 65W, V, 50/60Hz tested & comply to MS IEC / MS 141 approved by ST & JKR for Low Loss requirements of 6W
For High Intensity Discharge lamps (Sodium, Mercury, Metal Halide) lamps rating of 35W – 2000W, V 415V, 50/60Hz tested & comply to MS IEC / MS IEC 60923:2008 approved by JKR & TNB for Low Loss requirements
Low Loss Ballast for HID
All our ballast are manufacture using quality high temperature Enamelled Copper Wire and low loss grade Silicon Electrical Steel

7. Approvals and Certifications for REFAS Low Loss ballast
SIRIM – Product Certification Licence
Suruhanjaya Tenaga Approvals
TNB COPA

8. Approvals and Certifications for REFAS Low Loss ballast
SESCO East Malaysia
Queensland Government, Australia

9. Business Premises Lighting
Energy Saving System
REFAS™ Centralized Dimming System (CDS)
The REFAS Centralized Dimming System (CDS) is a energy saving system design for lighting dimming application.
It is designed to provide flexibility in reducing energy consumption in lighting system, during off peak hours to reduce operating cost. The system consists of 3 preset level of power outputs, i.e. Full power, Dimmed Level 1 and Dimmed Level 2.
The system is suitable for application in most of Malaysia’s highways, buildings, car parks, warehouses, sport halls etc..
Factories
Warehouses
Business Premises Lighting
Highways
Bridges
Street Lighting

10. Flexibility REFAS™ Centralized Dimming System (CDS) Benefits-
Energy Saving System
REFAS™ Centralized Dimming System (CDS)
Benefits-
Adaptable to different lighting applications
Programmable dimming periods
Configurable for different lighting loads and design
Provide 3 different levels of dimming
Flexibility

11. Save Energy REFAS™ Centralized Dimming System (CDS) Benefits-
Energy Saving System
REFAS™ Centralized Dimming System (CDS)
Benefits-
To save energy when space is unoccupied.
To maintain light level for safety and security reasons.
Provide 15-25% of power saving
Operation cost saving of 18-20%
Low maintenance cost
Reduction of CO2 emission ( Green House effect )
Save Energy

12. REFAS™ Centralized Dimming System (CDS)
Energy Saving System
REFAS™ Centralized Dimming System (CDS)
CO2
Emission Reduction
Nilai – Seremban Installation
25 Feeder Pillars – Annual Saving of 300,000kW/h
Equivalent to the reduction of 167 Ton CO2 emission or 77kL of Oil
Contribution in minimizing of Global Warming Effect

13. ETM’s Project Summary ……
Ballast/Electronic Products- Kuala Lumpur International Airport (KLIA) Building Kuala Lumpur International Airport (KLIA) Covered Car Park SIRIM R&D Centre, Batang Kali Giant Supermarket, Kuantan New Pantai Expressway (NPE) Lebuh Raya Damansara – Puchong (LDP) PLUS North South Expressway High Court Building Jalan Duta Science Park III, Singapore VIP Complex & Police Station Changi Airport, Singapore Putra Jaya Administration Buildings Putra Heights Interchange Ipoh North & South Toll interchange JKR Jelapang to Lumut Interchange Gerbang Selatan CIQ Johor Baru Kuala Lumpur – Putrajaya Expressway (MEX) and others…………
Putra Heights
KLIA
Jelapang-Lumut
MEX
Gerbang Selatan
Nilai-Seremban

14. ETM’s Project Summary ……
Energy Saving Products- CDS
Kajang SILK
Alor Setar Airport
Alor Setar
Cyberjaya
Gerbang Selatan JB
KL-Putrajaya (MEX)
Nilai - Seremban
Penang Bridge

15. Total number of CDS installed – 160 units
From Project Lebuhraya Pantai Timur Terengganu Eastern Disperal Link Expressway, Johor Baru Upgrading of LDP Expressway Upgrading of the PLUS North South Expressway Second Penang Bridge……

16. Saving Energy is OUR BUSINESS.

17. THE END
HAVE A NICE DAY !!