1. SiLC (Silicon tracking for the International Linear Collider) http://silc.in2p3.fr H.J.Kim (KyungPook National U.) on behalf of the SILC R&D Collaboration (major transpariencies from Aurore Savoy-Navarro)

2. Outline  The Collaboration  Goals  The R&D activities ¤ ¤ R&D on sensors ¤ ¤ R&D on electronics ¤ ¤ R&D on Mechanics  The tools >> >> Alignment(s) & calibrations >> Lab test benches >> >> Test beams >> >> Simulations

3. The SILC R&D Collaboration U.S.A Michigan U. SCIPP-UCSCEurope IMB-CSIC, Barcelone (SP) Geneva U, Geneve (CH) Helsinki U. (Fi) IEKP, Karlsuhe U. (D) Moscow St. U., Moscou(Ru) Obninsk St. U., Obninsk (Ru) LPNHE, Paris (Fr) INFN-Pisa, Pisa (It) Charles U., Prague (CZ) Roma 1, La Sapienza (It) IFCA, Santander(Sp) Torino U., Torino (It) IHEP, Academy Sci., Vienna (Au) Asia Kyungpook U. Taegu, Ko Korea U. Seoul, Ko Seoul Nat. U., Seoul, Ko Tokyo U. (Japan) HAMAMATSU (Japan) Close connections:  FNAL (DOE prop 05) UCSC, FNAL, LPNHE  SLAC (DOE prop 03: funded): UCSC, SLAC Michigan U, LPNHE and meetings Launched January 2002, Proposal to the PRC May 2003, Status Report May 2005 Several contracts of collaborations between Institutes, ex: HPRN-CT-2002-00292, CICYT-IN2P3, IN2P3-Hamamatsu, DOE proposals, EUDET 85 participants

4. R&D Goals Very high precision on momentum and spatial measurements Full coverage Low material budget Robustness Easy to build and to work with Low cost SiLC is a generic R&D collaboration to develop the next generation of large area Silicon Detectors for the ILC; It applies to all the detector concepts and indeed gathers teams from all 3 detector concepts:  In all 3 detector concepts Si tracking plays an essential role  SILC R&D offers a unique framework to compare tracking performances between the various detector concepts.  Main difference between the detector concepts = tracking system SiD GLD LDC

5. R&D on Sensors Silicon strips are the baseline with:  Silicon strips are the baseline with: Larger size wafers Thinner/Thinning Smaller pitch High yield Eventually different shapes Possibility to use new technos in some regions:  Possibility to use new technos in some regions: From ‘standard’ pixels of 50µ x 300µ to new Pixel technos: FPCCD, DEPFET, MAPS/FAPS, SOI …

6. First Prototype on Si strips of different length VA64_hdr Tsh=3.7µs 28cm x N=1,4 Built by Geneva U., ETH Zurich & Paris with AMS technique Courtesy G.Ambrosi (Perrugia) ‘’Serpentine technique’’ recto/verso

7. Signal over noise as a function of strip length Signal spectrum is summed over a cluster after pedestal and common mode subtraction. The radioactive source is a Sr90-Y90 beta source. The S/N measurements were achieved on variable length strips with the prototype at Paris test bench sensor to be measured Results see next slide

8. Results on S/N Collaboration Paris-Prague New 20 L=28cm, S/N(MPV)=20 or S/N(Mean)=30 L=56cm, S/N(MPV)=12 or S/N(Mean)=18 Cluster size~2 Noise vs capa Next steps: Change detector & FE prototypes go to test beam

9. Some other S/N measurements and/or computations Nomad experiment: results from beam tests on S/N with same sensors and VA1 FE chips These results and the ones we have obtained are confirming that 30 cm long strips have S/N greater than 20, and 60 cm long strips have S/N greater than 10. Nota bene: These results are of course dependent of the detector prototype and the associated F.E.E. Curve computed with the known parameters of VA_64hdr

10. 2) Development of fabrication line for new sensors Several Institutions in SILC (also Helsinki U.) are developing new sensor research lines Such facilities are very usefull for developing & testing new ideas and transfer to Industry. For large production, high quality and reliability: HAMAMATSU Monopoly Ex1: 5’’ DSSD fab. line in Korean U. Ex2: rad hard sensor techno at IMB-CNM J.Lee’s talk

11. 3) Process Quality Control and sensor characterization Self-made chuck and probe card support Semi-automatic sensor probe station for quality Control: system overview Process control scheme: Test structure (Vienna, Karlsruhe, Korea, Helsinki, Pisa ….) Test of 10 Hamamatsu det. S8743 (GLAST) 8.9500+/-20 x idem µm Strip pitch: 228µm Nb of strips: 384 (done @Vienna PQC set up )  Developing new sensors  Test of production Essential for

12. Longer term prospects on the R&D on sensors To develop Si strip wafers single sided of at least 8’’, with readout pitch of 50µm, as thin as possible, and with high yield (>50%) To develop ‘’thinning’’ technique in order to get at least 2:1 reduction in thickness (already underway) To develop double sided wafers of at least 6’’, and with high yield (>50%) Keep in mind some of the µvertex technologies for certain parts of the Si tracking system. New way(s) to connect electronic on detector with strips (connectics) Objectives: To develop R&D sensors fab line in Research Laboratories in order to develop ideas as listed above, and later on, to transfer technology to Industrial firm(s). Presently, HAMAMATSU is THE firm able to produce large amounts of detectors in the most reliable way; Will this continue in the future?

13. R&D on Electronics The Si tracking system: a few 100m 2, a few 10 6 strips Events tagged every bunch (300ns) during the overall train (1 ms) Data taking/pre-processing ~ 200 ms Occupancy: < a few % Goals: Low noise preamplifiers Shaping time (from 0.5 to 5 µs, depending the strip length) Analogue sampling Highly shared ADC Digitization @ sparsification Very low power dissipation Power cycling Compact and transparent First LPNHE prototype fulfills most of these goals NEW!!

14. Two designs SCIPP-UCSC: Double-comparator discrimination system  Improve spatial resolution (25%) Next foundry: May 9. LPNHE-Paris: Analogue sampling+A/D, including sparsification on sums of 3 adjacent strips. Deep sub micron CMOS techno. First chip successfully submitted and now under test Next version: in progress

15. LPNHE chip: layout results & tests 3 mm 1.6 mm Shaper: simu vs measurement the layout: 16 +1 ch.(Nov 04)the chip (Feb 05) the test board VERY ENCOURAGING FIRST RESULTS

16. Lab test benches Pb reference sensor sens or 90 Sr source Dark box S/N ~ 10. In most Labs: LD & radioactiveSource (ex: Paris & Korea) Paris test bench Korean test bench sigma=14.4±0.2 J.Lee’s talk

17. Test beams: Goals  To qualify in conditions closest to the real life: prototypes of detectors (including New Si technologies) and of the associated FE and readout electronics.  Detection efficiency vs operational parameters  Spatial resolution, cluster size  Signal/Bruit  Effect of magnetic field (Lorenz angle determination)  Angular scans, bias scans  Integration with other sub-detectors  Alignment  Cooling (including power cycling)  In the specific & new ILC conditions.

18. Foreseen beams 1T, 6 GeV e- beam 5T cosmiques, laser Bonn electron 3.5 GeV Others: CERN, FNAL, KEK (Korean colleagues) Participants: All + FNAL

19. Using the test beam setup in Bonn beam BAT 1234Szintillator 3 x 3 mm² ATLAS Diamond T rigger L ogic U nit coincidence triggerbusy Si tracker Prototype Collaboration with DEPFET (under preparation)

20. Detector Prototypes: Support mobile Design (just started) Fabrication Assembling & Mounting Module with 3 sensors Module with 2 sensors Second layer partly covering the first one. Total of 60 trapezoidal sensors, About 10 K readout channels Ready by end 2006/beg. 2007 Other prototypes: Ladders of different sizes and sensors Forward Prototype: under CAD study

21. Schedule & Financing 07 06 Construction barrel pototype Tests (cont’d) also combined with Other sub detectors New foundry (>=512 ch + techno) Beam tests: elementary modules construction proto Forward Chips 128 ch. Preparations tests Proto1 EUDET (I3 EU project) foresees for Si-tracking in JRA2, the financing of:  Part of the chips (2 submissions) & large number of channels  Protos large dimension: a part of the Si central & Si forward trackers  Protos alignment  Protos cooling An R&D activity on a new scale is starting within SiLC when going to test beams. 08 09 now Bonn

22. SiLC R&D proposal was presented to the PRC on May 2003 Goal: to develop the next generation of large area Si trackers suited for performing very high precision measurements in spatial position and momentum at the ILC, All R&D aspects, on sensors, electronics and mechanics are addressed. All needed tools: simulations, Lab test benches, test beams, alignment and calibration are being developed Highlights/important progress these last 2 years:  Work on sensors: characterization of strips of variable length, development of fab lines  FE electronics in deep submicron CMOS techno  Developing Lab test bench for highly precise measurements  CAD of all the tracking components, for both LDC (Si Envelope) & SiD  Thermo mechanical studies NOW: Preparing for test beams and getting even closer to the real life conditions. The collaboration is getting speed and established close contacts with all 3 detector concepts Keeping synergy with LHC (SuperLHC).

24. Next step: going to 128 channels with analogue sampling included; second chip prototype currently under design, foreseen submission Fall 05. Will equip the test beam prototypes Second Parigi prototype is underway

25. Longer term prospects for the FE readout chip and processing of the Si-tracking information Higher multiplexing factor for A/D, at least 512:1, possibly 1024:1 Go to deeper DSM techno (90 nm) Try SiGe techno for analogue part of the FE chip Work out packaging, output of signal and cabling issues: following last developments on those topics Develop upper stages of the readout and of the data processing for the Si- trackers: >> Clusterization to improve the position resolution >> track reconstruction (track segments) and their inclusion in the overall data flow architecture. Study the time information provided by those detectors (shorter shaping time possibility) Stay in close contact with/participate to the new developments for the SLHC tracking. Tests prototypes on Lab test bench but also on more real life set ups= use them for the readout of prototype detectors in test beams.

26. A systematic work is underway on an electronic test bench to fully characterize the 40 first prototyped chips: amplifier gain, linearity, dynamic range, noise, power dissipation; The power cycling will also be experienced. All the results are compared with simulations performed before sending for foundry as well as post simulations. As an example here below the results on the noise By courtesy of Jean Francois Genat