1. Motherboards The foundation of the Personal Computer

2. Physical Construction Fiberglass layers Copper foil – etched to make “traces” or connection “wires” Can be up to five layers “Plated through holes” to connect traces from one layer to another

3. Classification Characteristics Layout – or form factor. Defines what type of case is required Chipset – Defines the type of processor, memory and expansion bus. Components – determine the functionality and the rest of the expandability of system

4. Form Factor The particular way components are positioned on a motherboard Three basic form factors: AT, ATX and BTX and a handful of variations Cases are designed to work with just one form factor as are power supplies

5. AT Form Factor Just one connector – for keyboard. Large (1/2”), five-pin connector Processor socket at opposite end of board P8 and P9 style power supply sockets Later AT’s had pin connectors for serial and parallel ports – used “dongles” to get ports to back of case Used ISA slots; limited System Resources

7. Baby AT Smaller than AT, but same basic layout For smaller cases

8. LPX and NLX Slim-line or Low Profile motherboards for “desktop” or “pancake” systems Use a “riser slot” to allow expansion cards to be parallel to motherboard

10. ATX form factor About 1995 for introduction, 1998 for mainstream Utilizes PCI slots Better power control – read software can turn off system or components (hard disk drive and/or video). Called Soft Power. Shift to PS/2-style keyboard and mouse ports P1 style power connector

12. MicroATX Smaller than ATX Fits in standard ATX case or smaller microATX case (E-Machines, Compaq) Fewer expansion slots; usually more built in connectors

14. Proprietary Motherboards HP, Compaq, Sony, Gateway Non-standard power supplies, power connectors and front panel connectors Sends you to them for parts – read $$$

15. Chipset Varieties Defines processor, RAM, expansion Northbridge now gets its own heat sink NB handles CPU and RAM Southbridge handles hard disk drive, floppy drive, expansion slots, serial and parallel ports Needs BIOS support, only some of which is in System ROM; remainder in drivers specific to chipset and OS CD ships with motherboard in box Intel uses Memory Controller Hub (MCH) and I/O Controller Hub (ICH)

16. Ode to Mike No, you do NOT have to know chipsets by number… He just got through saying that 100 sets are produced each year (that’s a bit optimistic) And no, techs don’t love to talk about chipsets – rather talk about clients.

17. 845 Chipset 15

18. 925 Chipset

19. Where for the Dollars? Newer chipset makes the motherboard more expensive because it is more expansive Older chipset might work just fine for the application(s) at hand You can “read” the chipset by looking at what the motherboard supports (the specs)

21. The Expansion Bus

22. Three Tasks A card needs to be built specifically for the expansion slot – the right signals at the right place. Connectivity Card needs some way to communicate with the CPU – in and out. Communication Operating System needs some way to allow user to control the device/card. Drivers

23. Structure Expansion bus(es) connect to the chipset And PCIe

26. Speed CPU (and Northbridge) tied to System Crystal Almost all chips/devices have clock wire for timing This could lead to lots of devices at each specific speed (66, 100, 133, etc.) Solution is to add an Expansion Crystal for consistent timing on the bus

27. Expansion Crystal

28. Enter PCI Intel gets credit for this one (1993) Peripheral Component Interconnect 32-bit, 33 MHz; “mezzanine” bus as it sits between FSB and rest of expansion bus (ISA) Self-configuring (PnP), allows Ultra-DMA (bus mastering) Uses sharable Interrupt Channels (INTA, INTB, C and D) Supports I/O addresses above 3F8 to FFFF

29. Honorable Mention to AGP Video demands keep pushing bus improvements Accelerated Graphics Port PCI slot with its own connection to Northbridge This, and more, when we do Video chapter

31. PCI - X PCI Extended 64-bit slot for servers, Mac G5 Four speeds: 66, 133, 266 and 533. 266 is double-pumped 133; 533 is quad-pumped. Not going to see this on the desktop.

32. PCI Express PCIe –xN. PCI express by “N” (some number of lanes wide). About 2004-5 Serial connection (differential signals) Not a shared bus like all before it; each connection direct to Northbridge chip

33. PCIe Speed PCIe 1.0 at 2.5 Gbps; 2.0 at 5Gbps 1,2,4,8 or 16 lanes Total 16Gbps for x16 slot

34. Installing Expansion Cards Need to know that the card works with OS and motherboard Insert card properly – don’t break things and beware of ESD Provide drivers – specific to card and OS Verify proper operation

35. Will it work? Will it work with your motherboard? –Can’t install PCIe-x16 video card in AGP slot –Can’t install ISA sound card in PCI-only m/b Will it work with your OS? -This will be an issue for Windows 7 (?) -Always an issue with new OS Is device on the Hardware Compatibility List (HCL) or Windows Marketplace?

36. Drivers Expansion cards WILL have a floppy/CD with driver(s) in the box. Read the directions to determine what’s first: device install or driver install Video cards usually need old (card) drivers removed first; usually in Add/Remove Programs Remove All-In-One printer controls from Add or Remove Programs too.

37. More Drivers A lot of drivers are “unsigned” – usually means they did not pay Microsoft to test the driver. It’s not as scary as it looks. If you have to force the Add Hardware Wizard you probably did something wrong 64-bit Vista and 7 require driver signing Usually have to have Administrator permissions to install card

39. Verify Operation Don’t leave until you have verified operation of the expansion card. Device Manager is a good place to check after install and driver install Have the device do its something just to make sure all is well (and client is happy)

40. Physical Installation Do you have an available slot? Beware ESD Beware the 5v on the motherboard – pull the plug during installation Handle the card carefully – don’t get “wet” fingerprints on connector. Insert, and remove, card at a slight angle Install the attachment screw before you power up the system

41. Handle card

42. Installation Order Most video cards today require that you –uninstall current video drivers (revert back to generic Microsoft driver) – install new driver software –Remove old card and install new card –Finish (driver) installation Always read installation instructions first

43. Preventative Maintenance Don’t use pencil eraser to “clean” contacts, rather, use canned contact cleaner – but only if card has had a long shelf life. Sometimes removing and reseating a card a time or two will bring the card back to life. The attachment screw WILL line up with hole if you have installed card correctly

44. Trouble - Visable Device Manager error indicators: –Yellow circle with black exclamation point usually means driver is damaged –Red “X” symbol means device is disabled and not working –Yellow question mark is found device but lacking correct driver(s).

45. 1

46. Trouble – Not Visible Windows should recognize new card on bootup and ask for driver(s). If it does not ask, you (or card) failed some step. USB devices should be recognized on connection. Drivers, drivers, drivers Get an account at DriverGuide.com (old advice) – get a new card Could be that device is turned off in CMOS

47. Upgrade/Replace Motherboard Was a straight forward process with Win 98. It would complain, but after a few restarts and driver installs would be happy with a new motherboard. XP to 7, by contrast, often locks up at new motherboard – you may need to reinstall OS and applications. Factor that into upgrade plans. And re-activate, too.

48. Get the right case AT motherboards required AT case (and power supply). Desktop cases require smaller board (NLX). Mini-Tower is going to need microATX board.

49. Just do it Label stuff as you go along. Unplug all connectors (ribbon cables, power cables and front panel cables). Remove all expansion cards. Remove all the board screws. CPU, heat sink and RAM best handled outside of the case. Remove once board is out, replace before board goes into case. Watch out for ESD. Replace in reverse order. 10

50. Front Panel LEDs Not light bulbs – have a positive (color) wire and negative (white) wire. Backwards won’t harm board, just won’t light the LED. System will work without LEDs, but is more pretty with them working. Use the motherboard book or go to the web if in doubt.

52. Mike’s suggestions Removable front panel is dated (AT) stuff So is side panel motherboard mounting Rare today is the case that does not have front panel USB ports. Even more rare is the case where you have to remove the power supply to get motherboard out (Dell, etc.)

53. Troubleshooting Catastrophic – system won’t boot even with all but video card removed. Component – ESD or power failure can cause it. Spill that drink on your keyboard. Mike’s ethereal – random reboots and blue screens. Major headache to trace down. Don’t take random approach: replace one component at a time, write down what you did and watch where the problem goes (i.e. is it still there?). Flashing the BIOS is almost never the cure.

55. And then there is The Shuttle PC

56. BTX The BTX form factor in a desktop case 4