1. Virtual Serial Port C: Selected com from the left window B: List of the virtual coms who must be used on the sistem A: Buttun used to select or deselect virtual coms A: This button permit to select all virtual coms to be used on the sistem B: This window show selected virtual coms to be used on the sistem and permit to select a com to be make configuration for this C: Here is shown if there is an com selected

2. Virtual Serial Port D: AdressIP of the remote computer E: Port of the remote computer F: For an selected com you can test connection to server D: This IP Control permit for the selected virtual com to configure adress IP of the remote machine E: This text box permit to set for the selected virtual com to configure port of the remote machine(value from 1024 to 65535) F: This button permit to test if the selected com running properly with these parameters already configured

3. Virtual Serial Port H: Trace Tab : For debuging purposes I:Connect Coms Button G: Status Tab:If is activated here are the status for all coms G: Status Tab shows the status of the all serial com selected H: Trace Tab is automat activated for testing an selected port or manual can be activate for test any coms allready connected I: This button permit to test if the selected com running properly with these parameters already configured

4. Virtual Serial Port J: Trace Tab : Cau you see what is happening on the selected coms J: Trace Tab shows the all characters hwo are send-it or receiving from network and from serial com for selected com and all the error messages from network subsystem from all serial coms

5. Virtual Serial Port K: Status Tab->Com Status show the status for all serial virtual coms selected K: Com Status show the status for Serial Coms.For a serial virtual coms status may be Opened when the serial com was created and open by an aplication like Hiperterminal or Closed when this may be created but unopened by an aplication and in this case the button Connected Com is modified in Disconnect Com and Closed but the Serial Virtual com it was not yet created and this Virtual Coms can be created by clicking on the Connect Com.If the Serial Virtual Com was created then button Connect Com is now Disconnect Com

6. Virtual Serial Port L: Status Tab->Net Status show the network connection status for Virtual Com L: Network Status show the status for Serial Coms.For a serial virtual coms status may be Connected when the serial com was created and the network client part from Virtual Com has realised a network connection to the Serial Server and this client has an established connection with server(with netstat command we will see 2 link on the port selected for this Serial Com); Disconnected is show when the connection is not realised or the button to create Virtual Com was’nt pushed

7. Virtual Serial Port M: Status Tab->IPAdress and Port show configuratin for all selected coms M:Configuration for each serial com is shown.By default these fields are configured with local ip address and value 9000 for port.Configuration for any port are realised on the text box above.All modification from text box are automated shown in these fields You can not disconnect any com who are Opened

8. Virtual Serial Port N:This Message Box is shown when we try to make another selection from Select COMs When we try to make a new selection for serial com and exist Serial Virtual create then a message box is shown with a message who said that we must to disconnect all the Serial Coms connected

9. Virtual Serial Port This Button save the configuration for all selected coms The configuratin if is saved will be available to the next restart of the aplication