1. Tray Tools, Materials & Processes

2. The Pillar Drill can be used to drill wood, metal, and plastic. As a general rule the larger the hole you are trying to drill the slower the drill should rotate. When using this (or any other machine) it is important to read the safety notice on the wall to make sure you understand how to use the machine safely. When using the Pillar Drill you must Wear Goggles Tie any long hair back Tuck in any loose clothing The Pillar Drill

3. On / Off Switch Drill Chuck Chuck Guard Chuck Key Machine Vice Depth Stop

4. Cordless Drill Keyless Chuck On / Off switch Forward / Reverse Switch Battery Pack The Cordless Drill can be fitted with a drill bit (1mm to 10mm) for drilling small holes, a Countersink bit for countersinking holes or a Screwdriver bit for driving in screws. Screwdriver Bit Adjustable Clutch

5. Drill Bits 1)Twist Drills (Used for drilling wood, metal and plastic) 2) Reduced Shank Twist Drill (As above but reduced shank allows larger drill bits to be fitted in a chuck) 3) Dowel bit (Used to drill clean holes in wood for dowel joints) 4) Spade Bit (Used for drilling large holes in wood) 5) Masonry Bit (Used to drill holes in concrete) 6) Forstner Bit (Used to drill clean flat bottomed holes in wood. Available in a wide range of sizes 6 – 50mm)