1. Technical Training LAB Models D-Line

2. Characteristics Fully Automatic User Friendly Fixed Programs Up to 20 customizable programs Available from 28 to 160 Liters Multilingual Automatic door locking Sterilization Temperature range from 105°C to 137°C Automatic message for maintenance or filter replacement

3. New features Stores the last 100 cycles Up to 10 fixed programs Up to 20 customizable programs Up to 30 identification codes and passwords for level control Two PT100 sensors according to ISO 61010-40 or EN 61010-40 Up to 6 temperature sensors and 4 pressure sensors can be connected Controller and software complies with CFR part11 Several options possible Optional programs or features: F0 control ( optional) Disinfection/Isothermal Temperature range from 60°C to 105°C Optional Independent Recording for cross-checking cycle measurements

4. Vertical Autoclaves

5. Benchtop Autoclaves

6. Available options Fast cooling by water and compressed air Super fast cooling with Radial Fan Vacuum pump for pre and post vacuum Integrated steam generator for tabletop and vertical models Biohazard filter for air exhaust filtration

7. Example of a cycle

8. Piping diagram 2840 EL-PV models

9. Piping diagram 38XX models

10. Piping 38XX ELC F G PV

11. Piping 38XX ELC PV G BH

12. Piping 38XX ELVC PV

13. Piping 38XX ELVC PV G

14. Electrical Diagram AC part

15. Layout Main & IO board

16. Analog Inputs

17. Digital Inputs

18. Digital Outputs

19. Electrical diamgram generator

20. Control system generator

21. Assistance/parts required? If possible fax/ email printouts of the machine Always give us serialnumber and type of the model Parts have to be ordered by fax/email: order@tuttnauer.nl T:+31 (0)76 54 23 510 F:+31 (0)76 54 23 540 FTP://213.125.139.19 service@tuttnauer.nl http://www.tuttnauer.com