1. Advisor December 2009 User Council David Stevenson December 2, 2009

2. 2 Clarification of the meaning of the green check mark in Advisor  Green check mark means section has been completed.

3. 3 Pump Drive not recognized by Mounting Tool  Pump Drive was added as a selection in the Mounting Tool

4. 4 QSB3.3 wiring diagram was updated  The QSB3.3 wiring diagram was updated in the tech library

5. 5 Added AEB column to checklists

6. 6 Added Intake Mass Air Flow to the Engine Performance Screen

7. 7 Added Open Crankcase Ventilation checklist questions to Lube tool

8. 8 Updated Tier 4 Air Cleaner data  We updated the data for the Tier 4 air cleaners to include the pre-cleaner

9. 9 For Deaeration test, no radiator cap warning when using a coolant recovery bottle

10. 10 Updates to the Electrical Tool  In the checklist section, add a check for an excessive number of connectors on a single terminal.  Added a checklist question regarding the placement of connectors and the alternator to avoid wheel spray.  Added a checklist question regarding drive belt wrap, loading, & placement of alternator in belt arrangement (first position downstream of crank pulley is best). Graphics also added in Tech Lib.  Added a checklist question which asks the user if they intend to run frequently at low speeds. If answered "Yes", add a Comment asking them to check current output at low speeds.  An existing checklist question asks if alternator capacity exceeds the maximum electrical load. Will now ask instead if alternator is sized to have 15% more capacity than the maximum load.  Added Brush and Brushless as types of alternator components.  Added a recommendation for brushless alternators to the Comment currently generated when "Yes" answered to question regarding equipment being used in environments where sparks must be avoided.  Revised existing Cranking modeling section to include the charging circuit.

11. 11 Updates to the Electrical Tool  When you open a previous Cranking Circuit you will see “Invalid” in one of the fields.  You need to reselect the circuit diagram

12. 12 Updates to the Electrical Tool  Added “Charging Circuit Voltage Drop in Volts”  Added “Target Voltage Drop in Volts”

13. 13 Updates to the Electrical Tool  To reselect your circuit click this button

14. 14 Updates to the Electrical Tool  Added circuits diagrams with alternators Remember to click on the alternator connections

15. 15 Questions or Comments?  The Advisor Customer Council is your opportunity to provide feedback!