Presentation is loading. Please wait.

Presentation is loading. Please wait.

Enclosures & ComponentsBackplanesSystem PlatformsSwitches, Knobs & LEDsCabinets 1 Cooling Unit.

Similar presentations


Presentation on theme: "Enclosures & ComponentsBackplanesSystem PlatformsSwitches, Knobs & LEDsCabinets 1 Cooling Unit."— Presentation transcript:

1 Enclosures & ComponentsBackplanesSystem PlatformsSwitches, Knobs & LEDsCabinets 1 Cooling Unit

2 Enclosures & ComponentsBackplanesSystem PlatformsSwitches, Knobs & LEDsCabinets 2 Cooling Unit

3 Enclosures & ComponentsBackplanesSystem PlatformsSwitches, Knobs & LEDsCabinets 3 Top View Cooling Unit

4 Enclosures & ComponentsBackplanesSystem PlatformsSwitches, Knobs & LEDsCabinets 4 Power Supply

5 Enclosures & ComponentsBackplanesSystem PlatformsSwitches, Knobs & LEDsCabinets 5 Power input Negative DC Voltage Modules -48VDC or –60VDC feeds to power the system Positive DC Voltage Modules +24VDC to power the system AC Powered Modules 100V, 120V or 230V AC Mains to power the system The Power Module should use the output backplane power connector in order to distribute radially the payload (+12V) and management (+3.3V) voltages, so that each load can be managed independently of the others The Power Module should use the input connectors which support the AC or DC feeds Power Supply

6 Enclosures & ComponentsBackplanesSystem PlatformsSwitches, Knobs & LEDsCabinets 6 Power Module (PM) Power Supply source General Design - 48 Volt DC Powersupply 300/600 Watt. Gernerates 3.3Volt for all MMC and 16 Channels of managed 12VDC. The Management is done via I2C using IPMI commands. The module also handles filtering, conditioning, fuse. Works with single/dual MCH present in the system. Dual I2C and serial interface in front

7 Enclosures & ComponentsBackplanesSystem PlatformsSwitches, Knobs & LEDsCabinets 7 Specification  Redundant power input  various different input voltages specified: ▹ -60VDC ▹ -48VDC ▹ +24VDC ▹ and various AC inputs  16 outputs +12V DC, 16 outputs +3.3V DC (management)  Power: 600W  Single Full-size Module  Monitoring of AMC present signals  Hot Swap voltage switch-off  IPMB management controller (EMMC) Power Module (PM) Source: Tyco Power Supply

8 Enclosures & ComponentsBackplanesSystem PlatformsSwitches, Knobs & LEDsCabinets 8  Fits into a PM slot  Single Full-size form factor  Power input: +12VDC  Power output: 16x +12VDC; 16x 3.3VDC management pwr 1st generation  +12VDC throughput  +3.3VDC management power generation 2nd generation  Power switch-off of each +12V and +3.3V output (monitors AMC‘s present pin)  overvoltage protection  invers polarity protection 3rd generation  Additional management controller (Pigeon Point) Power Supply

9 Enclosures & ComponentsBackplanesSystem PlatformsSwitches, Knobs & LEDsCabinets 9 PM - Power Module / PDM - Power Distribution Module CU – Cooling Unit Products and solutions

10 Enclosures & ComponentsBackplanesSystem PlatformsSwitches, Knobs & LEDsCabinets 10 AMC Load card AMC load board with IPMI support Single module full size Configurable load 0-70W Dynamic load On board temperature sensors Products and solutions

11 Enclosures & ComponentsBackplanesSystem PlatformsSwitches, Knobs & LEDsCabinets 11 Mechanic ESD Clip Products and solutions

12 Enclosures & ComponentsBackplanesSystem PlatformsSwitches, Knobs & LEDsCabinets 12 Applications for High performance at small form factor for Communications infrastructure >Base stations >Media Gateways >Video on Demand Picture processing Medical Remote automation Defense Automotive Applications

13 Enclosures & ComponentsBackplanesSystem PlatformsSwitches, Knobs & LEDsCabinets 13 WiMAX RAN (IP Network) BS WiMAX Access Controller (WAC) Internet PSTN/ PLMN Trunking GW AAA Call Server Content Server Media Server  Access Controller  Base Station Source: Kontron Applications for Core Network (IP Network)

14 Enclosures & ComponentsBackplanesSystem PlatformsSwitches, Knobs & LEDsCabinets 14 Products and solutions

15 Enclosures & ComponentsBackplanesSystem PlatformsSwitches, Knobs & LEDsCabinets 15 MicroTCA shelf in 4U, 5U, 6U, 7U, and 8U heights Modular extrusion-based design Accepts various module configurations in one shelf platform Various backplane configurations Single or dual redundant fan trays in push only or push/pull configurations Removable air filter(s) Optional locking bars to secure modules in chassis Products and solutions

16 Enclosures & ComponentsBackplanesSystem PlatformsSwitches, Knobs & LEDsCabinets 16 Current Systems 5HE,84 TE, 12 AMC´s, 99,999% available Compact 6 AMC´s, Desktop/ Rackmount version

17 Enclosures & ComponentsBackplanesSystem PlatformsSwitches, Knobs & LEDsCabinets 17

18 Enclosures & ComponentsBackplanesSystem PlatformsSwitches, Knobs & LEDsCabinets 18 Micro Cube MTCA Cube with rugged Card Guides or with industrial Equipment. Special Feature: AC Power


Download ppt "Enclosures & ComponentsBackplanesSystem PlatformsSwitches, Knobs & LEDsCabinets 1 Cooling Unit."

Similar presentations


Ads by Google