Presentation is loading. Please wait.

Presentation is loading. Please wait.

Unit 6 – Risk Management and safety management system

Similar presentations


Presentation on theme: "Unit 6 – Risk Management and safety management system"— Presentation transcript:

1 Unit 6 – Risk Management and safety management system

2 Unit Objectives Describe the Risk Management process as applied to helicopter operations. Explain the purpose of the Safety Management System (SMS). Unit Risk Management

3 Risk Assessment and Management
What is Risk Assessment? Risk assessment is the process which associates “hazards” with “risks.” Risk assessment is the initial part of the risk management process which includes: Identifying know hazards and Analyzing the degree of risk associated with each hazard Unit Risk Management

4 Risk Assessment and Management
Risk Management Process Risk management is a continuous systematic process of identifying and controlling risk in all activities according to established parameters. This process includes detecting hazards, assessing the risk, and implementing and monitoring risk controls to support effective, risk based decision making. Unit Risk Management

5 Five Steps to Risk Management
Identify Hazards – Situation Awareness Assess the Hazards – Hazard Assessment Develop Controls Make Decisions – Hazard Control Implement Controls – Decision Point Supervise Unit Risk Management

6 Risk Management Applied
Step 1 – Identify Hazards – Situation Awareness Unit Risk Management

7 Risk Management Applied
What is a hazard? Any real or potential condition that can cause: Mission degradation Injury Illness, or death to personnel Damage/loss of equipment or property Unit Risk Management

8 Risk Management Applied
Factors that Determine Hazards Weather Time of flight Terrain Equipment Wires Military training areas Take-off and landing weights Training and proficiency level of personnel Unit Risk Management

9 Risk Management Applied
RISK FACTORS are divided into four categories for hazard identification: Man Machine Medium Method Known as the “4Ms Risk Factors” Unit Risk Management

10 Risk Management Applied
Step 2 – Assess the Hazards – Hazard Assessment Unit Risk Management

11 Risk Management Applied
Each of the hazards should be identified and analyzed by examining: The effect on personnel/equipment should a hazard be encountered. The probability that a hazard will be encountered. Unit Risk Management

12 Risk Management Applied
Effect – If a hazard is encountered during a mission, the effect may be: Catastrophic – Death or serious injury Critical – Serious injury, damaged equipment Moderate – Mission accomplished, adverse effects Negligible – No effect, mission accomplished Unit Risk Management

13 Risk Management Applied
Probability – The probability of encountering a hazard during a mission may be: Frequent – Continuously or often Likely – May encounter several times Occasional – May encounter sporadically Seldom – Encountered infrequently, remote Unlikely – Rarely, possible, but improbable Unit Risk Management

14 Risk Management Applied
How to determine the risk? Determine the severity, probability and exposure with each hazard. Determine the risk associated with the combined hazards. Initial assessment may indicate risk level(s) unacceptable. Once controls are implemented, risk level(s) may be at an acceptable level. Unit Risk Management

15 Risk Management Applied
Step 3 – Develop Controls Make Decisions – Hazard Control Unit Risk Management

16 Risk Management Applied
What is a risk decision? Weigh the risk against the benefits of performing a mission. Be aware that the mentality, even during non-emergency operations may be mission-oriented (get the job done). Unit Risk Management

17 Risk Management Applied
Risk Decision Tips: Involve operational personnel, especially those impacted by the risk decision. Apply redundant risk controls when practical and cost effective. Make risk decisions when benefit out ways the cost. Unit Risk Management

18 Risk Management Applied
Who should make a risk decision? Decision should be made at the level that corresponds to the degree of risk associated with that mission. Majority of the decisions that you will be associated with will be made by the Helicopter Manager. Unit Risk Management

19 These ratings based on unmitigated hazards
Composite Risk Level I II III IV Low Frequent Likely Occasionally Seldom Unlikely Hazard Probability A B C D E Extreme High Medium Catastrophic Critical Moderate Negligible Effect (1) (2) (4) (3) (5) (6) (7) Event Effect Probability Risk Level 1) Low Speed/Low altitude/over trees Catastrophic Frequent Extreme 2) Aircraft Operation w/doors removed Catastrophic Occasional High 3) Unimproved Landing Zone Critical Likely High 4) Crew Fatigue Critical Likely High 5) Blade Strike Occasional Critical High 6) Engine Failure Catastrophic Unlikely Medium 7) Weather Moderate Likely Medium These ratings based on unmitigated hazards Unit Risk Management

20 Risk Assessment Matrix
Unit Risk Management

21 Risk Management Applied
Step 4 – Implement Controls – Decision Point Unit Risk Management

22 Risk Management Applied
What are controls? A control is any kind of action that is taken to mitigate the risks that have been identified. These controls can range from writing a special-use action plan to simply conducting a short safety briefing. Unit Risk Management

23 Risk Management Applied
Once controls are implemented, reassess hazards to ensure that risk(s) have been mitigated to an acceptable level of safety. Unit Risk Management

24 Risk Management Applied
Incorporate selected controls into: Brief the pilot Brief personnel Weigh and prioritize loads Evaluate helispots Unit Risk Management

25 Risk Management Applied
Step 5 - Supervise Unit Risk Management

26 Risk Management Applied
How do you supervise control actions? Brief – Ensure personnel know what to do Follow-up – People are doing what is expected Update – Evaluate the plan continually Adjust – Make changes as issues arise Debrief – After mission is completed Incorporate – Lessons learned for future use Unit Risk Management

27 Safety Management Systems (SMS)
The ultimate goal of SMS is to provide an organizational framework or roadmap for developing and promoting a true safety culture, ultimately reducing our accident rate. Unit Risk Management

28 Safety Management Systems (SMS)
What does SMS do for us? Takes a proactive, “systemic” (big-picture) approach to managing Aviation safety Helps identify hazards and control measures to reduce risks Provides for ongoing “quality assurance” Unit Risk Management

29 Safety Management Systems (SMS)
SMS is based on the following premises: Every person in the organization accepts that safety is a conscious and ongoing mindset as opposed to simply a box to be checked. Unit Risk Management

30 Safety Management Systems (SMS)
Four “Pillars” or Components of SMS Safety Policy Safety Risk Management Safety Assurance Safety Promotion Unit Risk Management

31 What do each of the four pillars mean to you?
Discussion Point What do each of the four pillars mean to you? Unit Risk Management

32 Unit Objectives Describe the Risk Management process as applied to helicopter operations. Explain the purpose of the Safety Management System (SMS). Unit Risk Management


Download ppt "Unit 6 – Risk Management and safety management system"

Similar presentations


Ads by Google