1. BCI’s Aeronautical Telecommunication Network (ATN) Router
Basic Commerce and Industries, Inc.
Systems and Software Engineering
BCI’s Aeronautical Telecommunication Network (ATN) Router

2. BCI ATN Router General Capabilities
BCI’s ATN Router is a Class 4 ATN router in accordance with ICAO Doc 9705
Support all ATN OSI protocols: IDRP, CLNP, ES-IS, and IS-IS
Support ISO 8208 (X.25) and ISO 8802 (Ethernet)
Support IPv4 and IPv6 SNDCFs
BCI Systems and Software Engineering
Aviation Systems

3. BCI ATN Router Operating Environment
BCI’s ATN Router runs natively on any Intel-based processor
Under LINUX Operating System
Have delivered systems on Dell Power Edge Rack Mount System and HP Servers
Use Performance Technology 4-port card for X.25 WAN interface
Can be configured for redundant operation with a system controlled front-end switch
BCI Systems and Software Engineering
Aviation Systems

4. BCI ATN Router User Interface
Router has Graphical User Interface (GUI)
Intuitive and
Not dependent on Operating System or User Terminals
BCI Systems and Software Engineering
Aviation Systems

5. BCI ATN Router Configuration
Easily configured through Configuration and Adaptation Tool
# Start the BIS-2 neighbor system record #
SYS BIS-2
# Set the Network Address (NSAP)
NET
# Define the destination subnetwork Address for this neighbor
ETH b3d652c
# Define the local interface used to reach this neighbor
LINK ETH 00 TO ETH 00
# Define the IDRP Policy to be used with this neighbor system
PD_POLICY INTRA_REGIONAL_POLICY
# Terminate BIS-2 Neighbor System Record
END_SYS
BCI Systems and Software Engineering
Aviation Systems

6. BCI ATN Router Other Features
IDRP Security in accordance with Doc 9705 Edition 3
Can operate without a PKI using pre-shared keys
TCP/IP (RFC 1006) to TP4/CLNP Gateway
For AMHS Systems which only have AMHS over TCP/IP
Could also be used for AIDC to have dual-stack capability
BCI Systems and Software Engineering
Aviation Systems

7. Air/Ground Application Support
BCI’s Ground-Ground Router also supports Air-Ground Application Routes
Support Air-Ground Routing Policy based on IDRP attributes to signal Traffic Type
Can be used as Backbone for Air-Ground Traffic
Support 10,000 Air-Ground Routes
BCI is currently developing an Air-Ground Router
Will support Mobile SNDCF, VDL-2 Packet Level Procedures, and VDL-2 Handoff Across VDL Ground Stations
Will complete in 2nd Quarter 2009
BCI Systems and Software Engineering
Aviation Systems

8. BCI ATN Router Contact Information
For AMHS BCI’s Teaming Partner is COMSOFT, GmbH
For ATN products, engineering support, or training, contact
Tom McParland, VP, Aviation Systems Division
Telephone:
BCI Systems and Software Engineering
Aviation Systems