1. Woodwork Planes Quiz

2. Try Plane
What is the correct name for this
plane?…
Shoulder Plane
Smoothing Plane
Compass Plane
Rebate plane
Bull Nose Plane
Block Plane
Jack Plane

3. 2) On the diagram above indicate the dial that makes the blade move in and out.
(The blade adjustment nut )

4. Sorry, Wrong try again.

5. Sorry, Wrong try again and again.

6. 3. Which of the following planes would be used to plane a long uneven edge?
A Smoothing Plane
A Jack Plane
A Try Plane
A Block Plane

7. 4. The base of the plane is called ?
Mouth
Toe
Sole
Bottom
Heel

8. Try Plane
5. What is the correct name for this
plane?…
Shoulder Plane
Smoothing Plane
Compass Plane
Rebate plane
Bull Nose Plane
Block Plane
Jack Plane

9. 6) In which direction should you plane to avoid splitting end grain

10. Wrong, If you planed in this direction
you will probably split the end grain
here

11. Correct

12. 7. What is the correct name for this
plane?
Combination Plane
Rebate Plane
Compass Plane
Shoulder Plane

13. 8. What is the correct
name for a square
notch cut along
the side of a board?
Rebate
Tongue
Groove
Chamfer

14. Try Plane
9. What is the correct name for this
plane?…
Router
Smoothing Plane
Compass Plane
Rebate plane
Bull Nose Plane
Block Plane
Jack Plane

15. Try Plane
10. What is the correct name for this
plane?…
Smoothing Plane
Router
Compass Plane
Rebate plane
Bull Nose Plane
Block Plane
Jack Plane

16. 11. What is the correct
name for a square
notch cut along the
centre of a board?
Rebate
Tongue
Groove
Chamfer

17. 12. Which of the following planes
would be used to produce a
Groove?

18. Try Plane
13. Which plane would be most suited to
finishing the inside of a concave
curve?…
Smoothing Plane
Router
Concave curve
Block Plane
Rebate plane
Bull Nose Plane
Spoke shave
Jack Plane

19. Try Plane
14. What is the correct name for this
plane?…
Smoothing Plane
Shoulder Plane
Compass Plane
Rebate plane
Bull Nose Plane
Block Plane
Jack Plane

20. 15. Which of the following planes
would be used to level off the
base of a through housing
joint.

21. 16. Which of the following planes would be used to plane a wide flat board?
A Smoothing Plane
A Jack Plane
A Try Plane
A Block Plane

22. Quiz Completed
Well Done

23. 
Wrong
Click here to try again