We think you have liked this presentation. If you wish to download it, please recommend it to your friends in any social system. Share buttons are a little bit lower. Thank you!
Presentation is loading. Please wait.
Published byUrsula Franklin
Modified about 1 year ago
CONSTRUCTION MASTERS 12345BONUS 678910BONUS 1112131415BONUS 1617181920BONUS
QUESTION # 1 ABCABC WHICH HAND SIGNAL SHOWS “SWING LOAD”?
QUESTION # 2 ABCABC WHICH HAND SIGNAL SHOWS “RAISE BOOM, LOWER LOAD”?
QUESTION # 3 A B C WHICH SIGNAL MEANS “TRAVEL THIS DIRECTION”?
QUESTION # 4 A B C WHICH SIGNAL IS FOR “TRAVEL BOTH TRACKS”?
QUESTION # 5 A B C WHICH SIGNAL MEANS “EXTEND BOOM”?
QUESTION # 6 A B C WHICH SIGNAL IS FOR “EMERGENCY STOP”?
QUESTION # 7 ABCABC WHICH HAND SIGNAL SHOWS “LOWER BOOM, RAISE LOAD”?
QUESTION # 8 A B C WHICH SIGNAL IS FOR “TRAVEL ONE TRACK”?
QUESTION # 9 A B C WHICH SIGNAL IS FOR “DOG EVERYTHING”?
QUESTION # 10 A B C WHICH SIGNAL IS FOR “MOVE OR PROCEED SLOWLY”?
QUESTION # 11 AB C WHICH SIGNAL IS FOR “RAISE THE LOAD”?
QUESTION # 12 A B C WHICH SIGNAL IS FOR “STOP TRAVEL”?
QUESTION #13 A B C WHICH SIGNAL MEANS “RETRACT BOOM”?
QUESTION #14 AB C WHICH SIGNAL IS FOR “LOWER THE LOAD”?
QUESTION # 15 AB C WHICH SIGNAL IS FOR “USE MAIN HOIST”?
QUESTION # 16 A B C WHICH SIGNAL MEANS “RAISE BOOM”
QUESTION # 17 A B C WHICH SIGNAL MEANS “LOWER BOOM”
QUESTION # 18 A B C WHICH SIGNAL MEANS “USE AUXILIARY HOIST”?
QUESTION # 19 A B C WHICH TYPE OF HITCH APPLICATION WOULD THIS BE USED FOR? A3 LEG CHOKER BBRIDAL C3 LEG BRIDAL
QUESTION # 20 A B C WHICH TYPE OF HITCH APPLICATION WOULD THIS BE USED FOR? A3 LEG CHOKER BBRIDAL HITCH C3 LEG BRIDAL
BONUS 1 ABCDABCD A WARNING INDICATOR ON SYNTHETIC SLINGS, ALSO REFERRED TO AS ____________. AWARNING LINES BTATTLE TALE YARNS CWEAR INDICATORS DDAMAGE YARNS
BONUS 2 ABCDABCD WHAT TYPE OF SYNTHETIC SLING IS THIS? AROUND BENDLESS CEYE & EYE DTWISTED
BONUS 3 ABCDABCD WHAT TYPE OF HITCH IS THIS? ABASKET BSPREADER CCHOKER DBRIDAL
BONUS 4 ABCDABCD WHAT PART IS THIS? AEYE HOOK BSHACKLE CEYE BOLT DPIN ANCHOR
Cranes and Slings 29 CFR and 184. Cranes Are Everywhere Cranes, derricks, and jib hoists are used in almost every industrial setting Cranes can.
CRANE OPERATIONS Cummins Southern Plains, Ltd.. Crane Operations Inspection Rigging Wire Rope Construction Chain Rigging Synthetic Slings Types of Hitches.
Copyright Business & Legal Reports, Inc. BLR’s Safety Training Presentations Cranes and Slings 29 CFR and 184.
RIGGING EQUIPMENT Industry Fundamentals and Occupational Safety Unit 6.
Multiplication Timed Tests. Name_______________________________ 2 x 0= 5 x 1= 3 x 1= 6 x 0= 7 x 1= 3 x 0= 2 x 1= 8 x 1= 10 x 0= 9 x 1= 10 x 1= 12 x 2=
BLR’s Safety Training Presentations Cranes and Slings 29 CFR and 184 Safe Crane Operating Procedures Inspections of Cranes & Slings The Appropriate.
OSHA Office of Training & Education1 Cranes. 2 Major Causes of Crane Accidents Contact with power lines Overturns Falls Mechanical failures.
1 Cranes Safety M. Zaman Bhatti Manager HSE, National Refinery Limited.
OSHAX.org - The Unofficial Guide To the OSHA1 Cranes.
My Life Monday What do you know about overhead crane safety? Overhead crane safety may not be relevant to all staff but dont you think it would be interesting.
PowerPoint ® Presentation Chapter 6 Cranes Crane Operation Industrial Cranes Mobile Cranes Crane Inspections.
Cranes and Slings Major Causes of Crane Accidents Contact with power lines Overturns Falls Mechanical failures 1.
Sling Safety (Level 1 Rigger). Objectives Be familiar with regulations regarding slings. Be familiar with regulations regarding slings. Understand safe.
Sling Load Capacity and Sling Angles The load capacity of the sling is determined by its weakest component. The load capacity of the sling is determined.
Crane Safety (Pendant) Safety Training Technical Training 1.
Hydraulic Crane Safety. Hydraulic Cranes Can be stationary or attached to trucks, trains and boats Can be stationary or attached to trucks, trains and.
Quiz About Your Topic Question 1 A question about your topic: A. [Insert incorrect answer] C. [Insert incorrect answer] B. [Insert incorrect answer]
Moments of Inertia Polar moment of inertia – Used when calculating the torsion – Indication of resistance to torsion – Solid Shaft – J = π R 4 / 2 Area.
FHM TRAINING TOOLS This training presentation is part of FHM’s commitment to creating and keeping safe workplaces. Be sure to check out all the training.
UNIT 6 Tractor Hitches PTO’s Hydraulics
1 OVERHEAD CRANE SAFETY F&T Inc.. 2 OVERHEAD AND GANTRY CRANE OPERATION Hoist operators must inspect equipment daily before use. Do not operate a crane.
Copyright Business & Legal Reports, Inc.
ACADs (08-006) Covered Keywords Rigging, hoist, crane. Description Supporting Material b.
© Easy Guides AustraliaQLD Vet Edition New Queensland Licensing Pathway MAIN MENU Introduction SECTION 1 – Site Hazards SECTION 2 – Cranes SECTION 3 –
RIGGING COMMUNICATION Industry Fundamentals and Occupational Safety Unit 6.
Safety : Cranes Introduction to Industrial Technology Spring 2014 Mr. Shubert 1.
Agenda 1.Pre-Use Inspections 2.Slinging Applications 3.General Safety 4.Banksman.
5. Shut Down Job and Clean Up 4. Perform Task 3. Prepare Site and Equipment 2. Select and Inspect Equipment 1. Plan Work QUIT EASY GUIDES AUSTRALIA PTY.
AB 11 22 33 44 55 66 77 88 99 10 20 19 18 17 16 15 14 13 12 11 21 22 23 24 25 26 27 28.
5. Set up the crane 4. Plan the lift 3. Check the crane 2. Communicate clearly 1. Prepare for hazards QUIT EASY GUIDES AUSTRALIA PTY LTD
Outline of Crane Operator Training For BMRC Labournet.
Crane Rigging. © Business & Legal Reports, Inc Understand the basics of crane operations Choose the correct sling or rigging hardware Inspect rigging.
Infinite sign: trace the sign starting in the center, go up left and follow the 8 (1)trace the sign with each hand separately first (6+ times, following.
Rigging Hazard Awareness Between the trolley hook and the load is RIGGING Ropes, Slings, Chains Slings inspected daily Proper storage when not in use Suitable.
35’ Ladder Beam Raise Two Person Level I 4/1/12. Introduction This presentation demonstrates the basic operation for a two person beam raise. The evolution.
Working Around/Under Loads. INTRODUCTION Whether its a load under a mobile crane, an overhead hoist in the shop or a culvert or trench box under a loader.
CRANE TIP OVER Date: May 12 th, INCIDENT A galloway was being pre-assembled to determine proper fit. It was then to be disassembled and sent underground.
Rigging Requirements Part L “Cranes” and Part F-1 “NOT CRANES” Construction Safety Standard WAC Brad Solheim Department of Labor & Industries Crane.
Office of Training & Education1 Rigging Equipment Slings Types of slings covered are those made from alloy steel chain, wire rope, metal mesh, natural.
Lifting Technologies ®. CRANES FIELD SERVICE SLINGS HARDWARE FABRICATION WIRE ROPE Lifting Technologies ® Rig it right and you won’t be wrong... This.
Copyright © 2012 American Safety Management Inc. Crane and Hoist Safety.
Climbing jack Operating sequences. Lifting sequence.
CRANE OPERATIONS SAFETY. Crane usage varies In our facility we use cranes to move materials in the shop and in the yard. However, whether or not it is.
3:00. 2:59 2:58 2:57 2:56 2:55 2:54 2:53 2:52.
Copyright © Crane Safety, Subpart N.
Signal Person Qualification 1. Chapter 1 Introduction Trainer Qualifications Course Objectives 2.
Crane Fundamentals Lifting Safety BY - ALEX MATHEW HSE ENGINEER LAHOUD ENGINEERING CO.
Lesson 3 Right of Way Lesson 3 Right of Way Understanding the Virginia Driver’s Manual 1.
NRMCA Safety Series 7. Pre/Post shift inspections Operating the loader Maintenance of the loader Always Lockout/Tag out/Try equipment that is being maintained.
© 2017 SlidePlayer.com Inc. All rights reserved.