1. SLITTER / REWINDER for Woven-non-Woven MOVIEINDEX

2. TECHNICAL DETAILS MATERIAL TO BE CUT:WNW GRAMMAGE:from 20 gr/m² USEFUL WIDTH:3500 mm. WORKING SPEED:400/800 m/min. SLITTING SYSTEM TYPE:shear and score cut MOTHER ROLL DIAMETER:2500 mm. REWOUND ROLLS DIAMETER:max 1200 mm. CORE DIAMETER:min. 76 mm. MINIMUM SLITTING WIDTH:100 mm.

3. APPLICATION ROYAL 1200 is a slitter/rewinder designed and suitable for cutting and rewinding woven-non-woven materials, both rugged textile fiber as Spanbond and elastic textile fiber as Spunlaces. Thanks to five installed motors and to a complex operational software, though of easy use for the operator with an intuitive graphic, the machine is able to keep a sensible control of tissue tensioning even during critical phases of speed up and down. Very good tolerances on width and perfect rewounds are guaranted, even with grammage up to 20 gr/m².

4. FEATURES and FUNCTIONING The longitudinal slitting system type Expando (produced by Mario Cotta – Zincometal Group) has a prerogative, sole all over the world, which allows the replacement of the cutting ring in a pratical and quick way without disassembling the rotation expandable shaft. The system can be supplied in three different versions according to productive exigences of each customer: manual, visualized or completely automatic positioning. The types of steel involved and the various adjustment possibilities of Mario Cotta knife holders allow to ROYAL 1200 to reduce the problem of dust produced during the slit. At the same time blades life will be longer. A second score cut slitting group (optional) allows to have a longitudinal tear cut.

5. SLITTING SYSTEM COMPONENTS SLITTING SYSTEM COMPONENTS Pneumatic knife holder for shear cut and linear rail with linear bearings Cutting ring replacement Pneumatic knife holder for score cut Circular knife for perforation

6. Rolls unloading can be done on the ground, thanks to a simple hydraulic tipper, or on pallet directly by means of a complex system complete with an unloading shuttle equipped with transport belt which is able to move the rewound rolls laterally at 90° on a pallet positioned before. FEATURES and FUNCTIONING

7. ADVANTAGES  Quick replacement of bottom cutting rings  Dust reduction during the slit  Practical and easy use of the operational software thanks to an intuitive graphic  Sensible control of tissue tensioning