Presentation on theme: "1 WT30 Product Explanation Wireless SS Terminals WT30 Wireless SS Terminal."— Presentation transcript:
1 WT30 Product Explanation Wireless SS Terminals WT30 Wireless SS Terminal
2 Concept Target application –Mainly: Remote supervisory of equipment operation at FA. –Sub.: Movement such as forklift Selling point –Globalization correspondence Export is available by acquisition each radio standard of Japan, the U.S., Europe, and China. –One component with wireless and I/O terminals Reduce space, reduce man-hours, reduce cost. –The small size for the installation in a control box It is 90mm in height and DIN rail attachment. –Wiping out of wireless anxiety The radio interference can be prevented by the antenna series and many frequency channels. Monitoring the receiving radio power level by the L.E.D. –Reduction of system cost (systems development, installation, maintenance cost)
3 Target Applications: The supervisor system in factory WT30-M01 Serial Master RS232C OR PC OC PLC Ｄｅｖｉｃｅ Ｎｅｔ WD30-ME OC （ CS1 、 CJ1 ） PLC 1) DeviceNet Master - Wireless Slave I/O 2) RS232C Master – Wireless Slave I/O Up to 64 slaves WT30 Slave WT30 Slave The best ON/OFF data collection wireless system for the FA site. Up to 64 slaves
4 For Global Available to use in Japan, Europe, U.S.A. and China. AreaStandards JapanARIB STD-T66 U.S.A.FCC part15.247 EuropeEN 300 440-2 China [Applicable Standards]
5 Wireless Slave has the I/O interface. We offer the 3 types of Wireless Slaves. 1) 16 Input pts. 2) 8 input and 8 output pts. With NPN/PNP IN 00 IN 01 IN 02 IN 03 IN 04 IN 05 IN 06 IN 07 IN 08 IN 09 IN 10 IN 11 IN 12 IN 13 IN 14 IN 15 COM (IN) COM (IN) COM (IN) COM (IN) ERR (P) ERR (N) +V (OUT) 0V (OUT) DC 24V DC 0V IN 00 IN 01 IN 02 IN 03 IN 04 IN 05 IN 06 IN 07 OUT 00 OUT 01 OUT 02 OUT 03 OUT 04 OUT 05 OUT 06 OUT 07 COM (IN) COM (IN) COM (OUT) COM (OUT) ERR (P) ERR (N) +V (OUT) 0V (OUT) DC 24V DC 0V WD30-SMD16 (IN16 pts.) WD30-SMD16(IN8 pts. OUT8 pts. (NPN)) WD30-SMD16-1(IN8 pts. OUT8pts (PNP)) [Pin Assign] Note) COM(OUT) is connected to +V(OUT) internally at NPN type. COM(OUT) is connecter to 0V(OUT) internally at PNP type.
6 Design for FA use 90mm 105mm 40mm Furniture for DIN rail Installation in control box with small size and DIN rail attachment.
7 Function: Easy setting System registration System registration can be done by setting SW only. Tool Software is not required. System registration can be done by setting SW only. 1) Scan list Valid / Invalid: The registration for slave entry. 2) The registration of serial No. Valid / Invalid: This function is for preventing from miss-communication with the other wireless group. It's done by the registration the serial No. [Scan list: Invalid] There is no entry and registration. You only set the rotary SW for the number of slaves. This mode is easy to setting include exchanging the unit. But this mode has low security. [Scan list: Valid Serial No. registration: Invalid] Scan list is automatically created by the setting of the rotary SW for the number of slaves. You need to re-set in case of changing the composition with in I/O size change. [Scan list: Valid Serial No. registration: Valid] Scan list is automatically created by the setting of the rotary SW for the number of slaves. You have to re-set to exchange the slaves, even if the same type of slave. But this mode has high security. High security Easy setting
8 Received Signal Strength Indicator (RSSI) LED Stability ERROR[Slave] ： The output signal that shows the wireless communication is instability. The WT30 shows the status in L.E.D.s. WS ： The Status of the Wireless Communication MS ： The Status of the Wireless Unit ERROR ［ Slave ］： The alarm of wireless communication error I/O LEDs ［ Slave ］： The Status of I/O Serial Com. LED ［ Serial Master ］： The status of Serial communication Function ： The display by L.E.D. You can confirm the R.S.S.I. in L.E.D. You can do the trouble shooting easily with the L.E.D.s. Display at the 9 levels Caution Instability
9 Function ： Free from Interferences The construction of more wireless systems becomes possible. The frequency that can be set is doubled from current model,WD30. So that, the interferences such as intermodulation are decreased. #1 （ 2401) #2 （ 2403.4) 2402.2 #3 （ 2405.8) 2404.62407.0 New added CH Current CH (WD30) Current Max34CH → Max67CH 1CH 3CH 5.5CH 5CH <-- the intermodulation wave The decrease of intermodulation
10 Function ： M.C.A. 2ch 11ch 21ch In case of the frequency SW is set “00”, the MCA, Multi Channel access, function is available. The wireless units automatically select the good frequency channel from 2ch,11ch and 21ch when the wireless communication is interfered. The obstruction wave Note 1) M.C.A. function is effective for a single system. Please do not use this function at the two or more system installation. Note 2) The frequency channel under the communication can be confirmed with LED. A steady communication is realized by MCA. This avoids the obstruction wave automatically. Rotary SW=00
11 Function ： Relay function RS232C PC × Repeater ○ ○ Serial Master Slave Wireless slave can be used as a repeater by setting SW. One slave unit can be used as a repeater. The communication area can be expanded. Note1) Becoming the repeater, the slave can't handle the I/O signal. (I/O terminal of repeater does NOT work.) Note 2) If the slave is in the area where wireless master can communicate, the slave connect directly to the wireless master. Note 3) Repeater function works without M.C.A. function. You can NOT use both repeater function and M.C.A. function.
12 WT30 Slave (Repeater) System configuration -- Serial master WT30-M01 -- WT30 (Serial Master) WT30 (Slave) WT30 (Slave) WT30 Slave (Repeater) WT30 (Slave) WT30 (Slave) WT30 (Slave) WT30 (Slave) -The number of the wireless slaves is up to 64 including the number of connected slaves via repeater - WD30-SE/-SE01 can NOT connect to WT30 Serial Master. WD30-SE - Repeater can be exist only 1 unit in the system. - I/O of the repeater does NOT work.
13 WD30-ME (Wireless Master) WT30 (Slave) WD30-SE (Slave) WD30-SE (Repeater 1) WT30 Slave (Repeater) -WT30 can NOT connect as a repeater. WD30-SE (Slave) WT30 (Slave) WT30 (Slave) WD30-SE (Slave) WT30 (Slave) WD30-SE (Slave) WT30 (Slave) WD30-SE (Slave) - Repeater is up to 3 steps - The number of slaves is up to 64 including the repeater - The number of slaves are limited by the total I/O size of slave's. System configuration -- Wireless DeviceNet Master, WD30-ME/-ME01 -- WD30-SE (Repeater 1) WD30-SE (Repeater 2) WD30-SE (Repeater 3)
14 Function ： Roaming -- Serial master WT30-M01 -- RS232C PC Repeater (Only 1 unit in a system) Serial Master Move 2) The communication route is automatically changed! 1) If the wireless communication becomes instability, …. 3) Wireless master tries to find the slave via the repeater. The Serial master automatically changes the communication route by using 1 repeater. The frequency channel is used in the same one.
15 Serial Communication on CompoWay/F WT30-M01 Serial Master RS232C PC - Addition information - Input signal at slave - The status of wireless slaves - The number of times on communication error -The R.S.S.I of the repeater or the slave connected to the master directly. - The frequency channel - The cycle time of wireless communication - The route infomaition - Out put signal at slave - The I/O size of slave - The R.S.S.I of each frequency channel The result of the radio monitoring in all frequency channels Using CompoWay/F, you can monitor the condition of wireless system.
16 Antenna Series 3 types of antennas 1/2λ antenna gain ： up to 2.14dBi Direction: omunidirectional Connector: SMA-P(reverse) Cable: No Wave polarization: vertical Impedance: 50Ω 1/2λ antenna gain ： up to 2.14dBi Direction: omunidirectional Connector: SMA-P(reverse) Cable: 2m coaxial cable Wave polarization: vertical Impedance: 50Ω Others: Magnet based 1/2λ planar antenna gain ： up to 2.14dBi Direction: +60°-60° Connector: SMA-P(reverse) Cable: 2m coaxial cable Wave polarization:vertical horizontal Impedance: 50Ω A suitable antenna for installation features can be selected. The interference reduction is possible by the directional antenna. A suitable antenna for installation features can be selected. The interference reduction is possible by the directional antenna.
17 Product Series Type (tentative)Master / Slave InterfaceConnector WT30-M01-FLKSerial master RS-232CD-sub 9 pin (Inch screw) WT30-SID16I/O slaveDC input 16 pts. (NPN,PNP Commonness)Screw less WT30-SMD16DC input 8 pts. (NPN,PNP Commonness) +Transistor output 8 pts. (NPN) WT30-SMD16-1DC input 8 pts. (NPN,PNP Commonness) +Transistor output 8 pts. (PNP) [Wireless Units] Type (tentative)Contents WT30-AT001Magnet based antennas ( 2 peaces) WT30-AT002Planar diversity antenna WT30-AT003Pencil type antennas ( 2 peaces) WT30-FT001Furniture for TH35-7.5 WT30-FT002Furniture for TH35-15 WT30-FT003Furniture for surface mount WT30-FT011Furniture for the Planar diversity antenna with magnet WT30-CA2M Extension cable for antenna (2m) [Option] Note The antenna is not attached to the wireless units.
18 Specifications ItemSerial MasterI/O Slave Power supplyRated voltageDC24V Range of permissible voltage DC20.4 to 26.4V I/O Power supply (for I/O circuit) Rated voltageDC24V Range of permissible voltage DC20.4 to 26.4V Ambient operating temperature Input 16 pts. ON: -10 to +50 ℃ Input 10 pts. ON: -10 to +55 ℃ Ambient operating humidity25 to 85% (with no condensation) 使用温度雰囲気腐食性ｶﾞｽのないこと Ambient storage temperature -25 to 65 ℃ Protective constructionIP30 端子構造電源：ｽｸﾘｭｰﾚｽ端子台 ( ﾌｪﾆｯｸｽｺﾝﾀｸﾄ製 FFKDS/V1- 5.08 または相当品 ) ｼﾘｱﾙ： D ｻﾌﾞ 9 ﾋﾟﾝ ( ﾒｽ ), ｲﾝﾁﾈｼﾞﾀｲﾌﾟ ( ｵﾑﾛﾝ XM2F-0910-132 また は 相当品 ) ｽｸﾘｭｰﾚｽ端子台 ( ﾌｪﾆｯｸｽｺﾝﾀｸﾄ製 FFKDS/V1-5.08 また は相当品 ) [General specifications]
19 ItemSpecifications Electromagnetic waveform Spread spectrum (direct sequence: DS-SS) Communications method Simplex (half-duplex) operation Frequency band2400 to 2483.5MHz Number of channels 67 (using frequency division) Antenna power10mW Wireless interval data transfer velocity100kbps Repeater functionSerial Master: 1 repeater is available with I/O slave WD30-ME: 3 repeaters are available with WD30-SEs 同一ｴﾘｱ使用システム数 Min 10 systems Maximum number of connectable Wireless Slaves 64 slaves max. [Wireless interface specifications] AreaStandards JapanARIB STD-T66 U.S.A.FCC part15.247 EuropeEN 300 440-2 China [Applicable Standards] Specifications