Presentation on theme: "1 CribMaster™ AMS Toolbox. 2 CribMaster Support Options ftp.ecribmaster.com/pub."— Presentation transcript:
1 CribMaster™ AMS Toolbox
2 CribMaster Support Options ftp.ecribmaster.com/pub ftp.ecribmaster.com/pub Videos - ftp.ecribmaster.com/pub/documentation/videos/ Technical Support CRIB-CMS CribMaster Support portal –
3 AMS TOOLBOX INTRO The original CribMaster ToolBox was the first of all the CribMaster vending solutions – 1992 Specs: 73”H x 39”W x 41.5” D, approx. 698lbs. unstocked (185.4 cm x 99.1 cm x cm, approx. 317kg) Add 5.8” (15 cm) for pallet height 120 volt/60 Hz, 4 amps (North America) 240 volt/50 Hz, 2 amps (Europe) Temperature Range -4F to 140F (-20 to 60 Celsius) Humidity of 20% to 80% RH Non-Condensing Specific model is AMS 39 – 660 Possible 1,920 individual items. Coil size and pitch options – Many Options
UN-CRATING THE AMS TOOLBOX Fork Lift close to vending location Remove retaining clips Fork lift upward to remove pallet 4
11 COIL PITCH BY METRIC 4 = mm12 = mm 5 = mm15 = mm 7 = mm18 = mm 8 = mm24 = = mm32 = mm 10 = mm
12 DIFFERENT TYPES & SIZES OF COILS
13 DIFFERENT TYPES & SIZES OF COILS
14 Bin Naming Format - - Ex: is located in Crib 10, Shelf 1, Bin/Tray 01
15 SIZING & PACKAGING ARE KEY! Methods and materials to help items dispense correctly: Rubber bands Plastic bags Roll and cuff gloves or sleeves, especially any glove with rubber or sticky surfaces Test with multiple items in coil to ensure total resistance is not greater than the motor(s) can dispense properly! Show Toolbox Packaging Video
INSTALLATION AND TRAINING RECEIVING ITEMS INTO THE AMS TOOLBOX ADJUSTING AND COUNTING ITEMS ISSUING ITEMS FROM THE AMS TOOLBOX 16
17 REPLACING PARTS & TESTING Removing Coils Removing Helix Adapter Removing Coil Wing/Plastic Triangle Replacing Motors Removing Tray/Drawer Removing Dividers Installing Riser Testing Coils: ATR9 Software and Internal Control Panel Show AMS Helix and Motor Configuration video
21 ATR SETUP Add AMS Toolbox, NOT ToolboxMachine!
22 TROUBLESHOOTING Motors can be spun using the internal control panel. Motors can be spun using ADMIN / ADJUST / OPEN within CribMaster ATR. Motors can also be spun using a CribMaster Utility application called “SPIN”.
23 TROUBLESHOOTING Incorrect Item packing will ultimately lead to jams. Incorrect item sizing can lead to jams.