We think you have liked this presentation. If you wish to download it, please recommend it to your friends in any social system. Share buttons are a little bit lower. Thank you!
Presentation is loading. Please wait.
Published byBrady Ainley
Modified about 1 year ago
SolidWorks Week 2-3
เนื้อหา คำสั่ง shell/fillet คำสั่ง Revolved Boss/Base, Revolved Cut คำสั่ง Swept Boss/Base, Swept Cut คำสั่ง Lofted Boss/Base, Lofted Cut การสร้าง ระนาบ (plane)
Practice 1: Shell/Fillet Online Tutorial : Lesson 1 Part
Practice 2: Revolved boss/ swept Follow steps in online tutorial (revolve & sweep feature)
Practice 3: Loft Follow steps in online tutorial (loft)
Practice 4: Rib
Step 1: 2D sketch on front plane
Step 2 : sketch a line on front plane
Practice 5: plane (with angle)
Step 1 :sketch 2D on top plane
Step 2: create new plane
Step 3: sketch 2D on new plane
Home works Unit: Inches
Tutorial: Business Card Holder Chapter 5. Feature 1 – Lofted Base INTRODUCTION TO SOLID MODELING USING SOLIDWORKS 2009.
Tutorial: Pulley Chapter 1. Tutorial Learning Objectives Learn more sketching commands Explore the use of relations within a sketch Use the revolved boss.
ES050 – Introductory Engineering Design and Innovation Studio 1 Features Prof. Paul Kurowski.
Dr Simin Nasseri, SPSU Tutorial: Pulley Chapter 2 Dr Simin Nasseri, SPSU Copyright of Howard and Musto, 2009.
Tutorial: Bracket Chapter 3. Feature 1 – Extruded Rectangle Center rectangle about origin to allow for use of symmetry later INTRODUCTION TO SOLID MODELING.
You must use the frame geometry slide from your bike presentation. Decide if you want to design your bike for a Small, Medium, Large, or Extra Large person.
Engineering Graphics with SolidWorks Instructors Name Course Name.
Introduction to Solid Modeling with SolidWorks 2006 Tutorial: Bracket Chapter 3.
WATER CLOSET TUTORIAL. New sketch on Top Plane 21” x 8” Extruded Boss/Base – 1” New sketch on surface (top of the base) Click Rebuild (traffic light)
ES050 – Introductory Engineering Design and Innovation Studio 1 Features Prof. Paul Kurowski Oct. 30, 2009.
Tutorial: Handlebars Chapter 5. 3-D Sketches Lines can be drawn in any of the three principal planes Use tab to toggle between XY, YZ, and ZX planes INTRODUCTION.
ENME 001 Block Week Course University of Calgary SolidWorks-1 SolidWorks 1. Introduction (1) What is SolidWorks? A Design Automation Software Package Used.
ES1050 – Introductory Engineering Design and Innovation Studio 1 Computer Aided Design (CAD) Part 3 Prof. Paul Kurowski.
3D Modeling Features and Modeling Strategy Professor Name Course Name.
Ken Youssefi Introduction to Engineering – E10 1 SolidWorks Select File.
Digitising. Planning : Analyzing Form Analyze geometric features of a form Decompose a form into different parts Rule surface? Sweep surface? Look for.
The Lego Man Basic 3D Modelling. The Head Use the Revolve Tool to get the sketch from 2D to 3D.
Solidworks Practice Homework Place in public directory by beginning of Class III.
SolidWorks Teacher Guide Lesson2 School’s Name Teacher’s Name Date.
Introduction to Revolve and Sweep in SolidWorks IAT 106 Spatial Thinking and Communicating Fall 2015.
Dr Simin Nasseri, SPSU Tutorial: Flange Chapter 1 Dr Simin Nasseri, SPSU Copyright of Howard and Musto, 2009.
Feature-Based Modeling and Optional Advanced Modeling ENGR 1182 SolidWorks 05.
Extrude Revolve Sweep Loft One or more closed profiles Height added normal/perpendicular to the sketch No gaps or intersecting lines in.
1 Ι © Dassault Systèmes Ι Confidential Information Ι Instructor’s Guide to Teaching SolidWorks Software Lesson 2 School’s Name Teacher’s Name Date.
Ken Youssefi Engineering 10, SJSU 1 The Blade Shape Design groups should conduct a thorough search of the internet to obtain information on turbine rotor.
1 Helpful Notes 2005 Tutorial 1 : Game Pad.
Image courtesy of National Optical Astronomy Observatory, operated by the Association of Universities for Research in Astronomy, under cooperative agreement.
The Hong Kong University of Science and Technology MECH 251 CAD/CAM MECH251 LABORATORY CLASS SolidWorks & MasterCAM learning.
SolidWorks Teacher Guide Lesson9 School’s Name Teacher’s Name Date.
Outline of class 1 st part: How to make sketches Entities Relations Dimensioning 2 nd part: How to make features Starting/ending points
ES1050 – Introductory Engineering Design and Innovation Studio 1 Computer Aided Design (CAD) Part 2 Prof. Paul Kurowski.
ASSIGNMENT D11 ADVANCED 3D TOOLS. ADVANCED TOOLS Sweep – Moving a cross-section through a path two form a three-dimensional object Needs a Cross-section.
ME 150 Engineering Drawing 1 Lab 3: 3D Intoduction 1 Umm Al-Qura University College of Engineering & Islamic Architecture Mechanical Engineering Department.
SolidWorks Teacher Guide Lesson3 School’s Name Teacher’s Name Date.
SolidWorks: Extruded Cuts, Fillets, and Patterns Introduction to Robotics.
An introduction to the program and the tools and general user interface.
1 Ι © Dassault Systèmes Ι Confidential Information Ι Instructor’s Guide to Teaching SolidWorks Software Lesson 9 School’s Name Teacher’s Name Date.
Lesson 3/4 Lesson Objective: Apply CAD Tools to the development of a virtual model. Adjust a virtual model to reduce production time. Export evidence of.
1 Ι © Dassault Systèmes Ι Confidential Information Ι Instructor’s Guide to Teaching SolidWorks Software Lesson 3 School’s Name Teacher’s Name Date.
Continuing Study of the Modeling “Add-ins” IE 1225 – Introduction to Design and Manufacturing R. Lindeke & J. Voss.
Create 3x3in. square. Extrude 3 in. Cut back.1in.
An Introduction to Solid works CAD/ Solid Modelling in 3D Level I: PGCE: 2008 RA Moffatt.
Ken Youssefi Mechanical Engineering Dept., SJSU 1 Creating a New Part File → New.
SOLIDWORKS: Lesson III – Patterns & Mirrors UCF Engineering.
Introduction to Solidworks OPTI 421/521 Won Hyun Park
Tutorial 1: Computer Aided Drafting (Concepts in Engineering Designs) 小明 in ERB106 SolidWorks Reference (Online resources)
Ken YoussefiIntroduction to Engineering – E10 1. Various Blade designs Ken YoussefiIntroduction to Engineering – E10 2.
PARTS – ARM PISTON CONNECTOR 13 – ARM BARREL CONNECTOR 14 – HAND BARREL CONNECTOR 15 – BASE BARREL CONNECTOR.
© 2017 SlidePlayer.com Inc. All rights reserved.