We think you have liked this presentation. If you wish to download it, please recommend it to your friends in any social system. Share buttons are a little bit lower. Thank you!
Presentation is loading. Please wait.
Published byAshly Honey
Modified about 1 year ago
Space Systems Laboratory University of Maryland 1. Task Story Board 1 Veridian Engineering Task Story Board A Corde Lane & Brian Roberts Production
Space Systems Laboratory University of Maryland 1. Task Story Board 2 Veridian Engineering Task Steps RPCM –Grasp and actuate Microconical Fixture (MEE) ECU –Release Keyway Slot Bolts (BBD) –Grasp Tether Loop (TLG) –Release Connector Bolt (RAD) APFR –Grasp and rotate Latch Quarter Turn Rings (AQP) –Release Latch Bolts (BBD) –Unlock Pitch Lock Knob (AQP) –Rotate Lower Body Probe (BBD) –Lock Pitch Lock Knob (AQP) –Grasp Yoke (TLG) –Squeeze Detent Levers (APG)
Space Systems Laboratory University of Maryland 1. Task Story Board 3 Veridian Engineering RPCM - MEE grasps microconical fixture
Space Systems Laboratory University of Maryland 1. Task Story Board 4 Veridian Engineering RPCM - MEE grasps microconical fixture
Space Systems Laboratory University of Maryland 1. Task Story Board 5 Veridian Engineering ECU - BBD actuates keyway slot bolt
Space Systems Laboratory University of Maryland 1. Task Story Board 6 Veridian Engineering ECU - BBD actuates keyway slot bolt
Space Systems Laboratory University of Maryland 1. Task Story Board 7 Veridian Engineering ECU - RAD on base bolt, TLG on Tether Loop
Space Systems Laboratory University of Maryland 1. Task Story Board 8 Veridian Engineering ECU - RAD on base bolt, TLG on Tether Loop
Space Systems Laboratory University of Maryland 1. Task Story Board 9 Veridian Engineering APFR - AQP on Quarter Turn Ring at BP Latch
Space Systems Laboratory University of Maryland 1. Task Story Board 10 Veridian Engineering APFR - BBD on Boot Plate Latch Bolt
Space Systems Laboratory University of Maryland 1. Task Story Board 11 Veridian Engineering APFR - BBD releases body latch
Space Systems Laboratory University of Maryland 1. Task Story Board 12 Veridian Engineering APFR - BBD begins probe rotation
Space Systems Laboratory University of Maryland 1. Task Story Board 13 Veridian Engineering APFR - BBD completes probe rotation
Space Systems Laboratory University of Maryland 1. Task Story Board 14 Veridian Engineering APFR - TLG on Yoke, APG on Detent Levers
Space Systems Laboratory University of Maryland 1. Task Story Board 15 Veridian Engineering APFR - TLG on Yoke, APG on Detent Levers
Kwikset Security 5-Pin Deadbolt and Door Knob System M. Elaine Buczynski Michael P. Tees Thomas J. Dudycz Nir Pony.
Gardell G. Gefke, Craig R. Carignan, Brian J. Roberts, and J. Corde Lane University of Maryland Space Systems Laboratory Ranger.
One Hand Tie - Step 1 Note that the short end has been placed beneath the tubing and is held in the right hand, away from the surgeon. The long strand.
Pratham Presenter: Matt Ryan Team Leader: Matt Ryan Chief Engineer: Gabe Letona Fabrication: Reed Langton CADCAM: Fraterno Vila Electronics/Control Engineer:
Space Systems Laboratory University of Maryland test.col.pp4 HERA: Hubble End-of-life Robotic Augmentation – A Robotic Alternative for SM-4 David L. Akin.
Clearing Procedures. DISASSEMBLY Major Groups Barrel Group Turn the cover latch and raise the cover group Grasp the retracting slide handle with the.
ZDC inside TAN – Crane position over TAN slot – lifting beam lowered to ZDC ZDC Sarco TAN.
1 Steering Columns. 2 Steering column components Steering wheel Air bag Clock Spring Steering lock plate Steering angle sensor Cancel cam Lock cylinder.
Bouncepad Lounge Training Instructions. Contents: What’s in the Box/Case Step 1: How to Unlock and remove the Faceplate Step 2: How to Connect the iPad.
Initial Design The initial Design was a horizontal dispense - horizontal load system where the smart cartridge was loaded from a maintenance hatch on the.
Before Exterior Inspection. Before Exterior Inspection Checklist Ever have questions about checklist items that are either: a) not in the sim or… b) different.
Removing and Replacing the Battery Cover 1. Ensure the phone is turned off. 2. Press the Battery cover locker; lift the battery cover up and away from.
SLAC NATIONAL ACCELERATOR LABORATORY C ONTROLS D EPARTMENT S AFETY S YSTEMS S ECTION NFPA , Access Control Systems, and Emergency Egress at SLAC.
1 Clutch Basics manual adjust / lube ZF Sachs Twin Extend operation & maintenance Western Region Art Herrnberger.
ModICE Modular Integrated Connector Enclosure Enclosure Assembly Instructions For technical or ordering information relating to this product, contact Cinch.
1 Starting Systems Small Engines. 2 Rope Wind Starter The simplest of all starters is the rope wind starter. It consists of a pulley, with one or two.
Models and Systems Lesson 1.4 Chapter 1: Using Scientific Inquiry Interactive Science Grade 8, Pearson Education Inc., Upper Saddle River, New Jersey.
Gripper Designs By Pragnay Choksi. INTRODUCTION Hands of robots referred to as Grippers No single design is ideal for all applications.
Chapter (8) INDEXING JIGS AND FIXTURES 8.1. Introduction Indexing is a process of quick, accurate location of w.p. or fixture in a number of specific positions.
Air Operated Valve Calibration NMV Terminal Objective Given the necessary references, tools and test equipment, the technician will maintain pneumatic.
Mu2e Production Target Remote Handling By: Michael R. Campbell, Fermi National Accelerator Laboratory, , System Layout Basic.
Ahmadu Bello Computer Repair Training Course 3: Assembling/Disassembling of a Laptop Computer By Suprix Technology Nigeria (www.suprixtechnology.com) A.B.U.
TOPIC : Types of clamping devices Prepared.BY:Thumar Sanket C. EN.NO: APP.BY:Mr.CRS Class: Mech-1051(B)
RP4AN 21/2 – 6. Modification Overview Production of the RP4AN series began in Production of the RP4AN series began in The 4AN indicates an.
Threading the Sewing Machine Place the Spool of Thread on the Spool Pin.
Copyright Silca S.p.A REKORD Copyright Silca S.p.A REKORD 2000 Results of major research which involved every single component, Rekord.
Shift lever – used to select a gear Tachometer – indicates the engine revolutions per minute Odometer – indicates the total number of the miles.
Service Brake Adjustments Eric Shogren. Tools Must Haves Wrench 4 Jack Stands Nice to Have Adjusting Board.
FLOOD Robotics Challenge. Title: Red cross supplies. Task: Students must push the blocks completely inside the circle. Scoring: Score 5 pts each.
Seacoast International Submarine Team Langdon Tarbell, Ryan Forbes, Matt Crist, Tyler Dutile, Sean LaMontagne, Mike Cargill.
-Make sure you get the right size - Hint: check the shoes you are wearing right now.
Equipment When dealing with stage lighting your primary concern should be.
RP4A 2½ – 6. Modification Overview Production of the RP4A series began in Production of the RP4A series began in A Lead free version (4ALF)
Wheel and Axle By: Jenna, Drew, Dylan. The Wheel and axle is a wheel connected to an Axle, these two parts rotate together and the force is transferred.
Rotation On a coordinate grid. For a Rotation, you need An angle or fraction of a turn –Eg 90° or a Quarter Turn –Eg 180° or a Half Turn A direction –Clockwise.
Introduction to Pneumatic Components Review These Slides and Build a Working Pneumatic Circuit.
Lesson 31 Main Engine Repair (II). 1. Crankpin bearing overhaul 2. Fuel pump removal & re-installation 3. Cylinder head removal/replacement 4.
9 February 2005ME 4182; Safety Lock Mailbox1 A-Team Safety Lock Mailbox Week 5 – Products and Patents Carlos Alzate Brian Dorton Song Park Varun Sharma.
Fuel Pumps 101 Locations Station 60 Gas & Diesel (176 th & 22 nd Ave E) Station 61 Diesel (114 th and A Street) Station 64 Diesel ( th St E) Station.
MAINTENANCE APPLICATIONS. MAINTENANCE APPLICATIONS FOR MOTOR COACHES.
Engine Disassembly manual. Oil plugs/ 10 mm wrench.
Model OutlineEngineChassisBodyBody Electrical VGRS (Variable Gear Ratio Steering) System General –The steering gear ratio will be changed in accordance.
QXF Reaction / Impregnation Fixtures J. Schmalzle 4/9/13.
Installation Quick Guide AD400 Cylindrical 6/01/13 Doc #
Robonaut Setup and Taskboard Training 5/2/2013 Curtis Kershner/ ER Dennis Bentson/
Kwikset Rekey Ultramax Rekeying the Ultramax by Kwikset this presentation is designed for beginners.
IRON MONGERY. Definition manufacture of iron goods, refers to the range of mechanical and moving items which enable a door to be opened, closed and locked.
Problem Statement & Conceptual Designs September 6, 2006 Team Moondogs Chris Culver Rahul Kirtikar Elias Krauklis Christopher Sampson Michael Widerquist.
Fasteners Mr. Lombardi Fasteners There are many different types of fasteners. Screws, Nuts, Bolts, etc. Each one performs specific task best accomplished.
BASIC RIFLE MARKSMANSHIP One Shot.... M16A2 RIFLE SYSTEM Consists of a Rifle, a Magazine, and a Sling. It Is a Lightweight, Gas Operated, Air-Cooled,
© 2017 SlidePlayer.com Inc. All rights reserved.