2. TM EUROLUPE http://www.eurolupe.com Eurolupe01.ppt

3. ..easy profit, easy loss.. from Hellmut Miksch 1999 & 2007 IlluminatedMagnifiers

4. Check of PCBsYes Check of PCBsYes Annual cost of 1 employee20.000 € / a + Annual cost of 1 employee20.000 € / a + Cost per checkn.a. Cost per checkn.a. Cost of magnifier65 - 1.500 € Cost of magnifier65 - 1.500 € Life expectance10 years + Life expectance10 years + practical necissity of magnifiers........................ practical necissity of magnifiers........................ practical use of magnifiers........................ practical use of magnifiers........................ Q- & Costdriver-influence of inspection & Q- & Costdriver-influence of inspection & a magnifier in company success & profit............. a magnifier in company success & profit............. ! Meaning of optical inspection

5. Q- & Costdriver-influence : Visit to doctor, just one visit during wirking hours will cost Visit to doctor, just one visit during wirking hours will cost more to the company than the annual cost of deduction more to the company than the annual cost of deduction Increasing the yield at just 1% will pay the magnifier itself Increasing the yield at just 1% will pay the magnifier itself --higher increase is higher profit! --higher increase is higher profit! Cost of reclamation, just one unnecessary reclamation - Cost of reclamation, just one unnecessary reclamation - inhouse or at the customer - will cost more than the annual inhouse or at the customer - will cost more than the annual cost of the magnifier! Plus hidden costdrivers are found cost of the magnifier! Plus hidden costdrivers are found mainly in unnecessary internal rework as well as lower mainly in unnecessary internal rework as well as lower inspection yield after 3-4 hours using insufficient equipment inspection yield after 3-4 hours using insufficient equipment speeding up fatigue of operator1.000 - 50.000 € / a speeding up fatigue of operator1.000 - 50.000 € / a Motivation of employees,.......... Motivation of employees,.......... practical use,... to assure higher yields practical use,... to assure higher yields

6. EU-workingplace-evaluation: Time of use of a product Time of use of a product Breaks Breaks mental or physical stress mental or physical stress possibility of danger and health riscs possibility of danger and health riscs reversible & irreversible damage (Lung- & reversible & irreversible damage (Lung- & eyedamage are mainly irreversible) eyedamage are mainly irreversible) prevention of sickness prevention of sickness Ergonomics Ergonomics State of the Art State of the Art other riscs other riscs CE CE etc etc !

7. OBJECT Eye Lens 3 Di : 30-40 cm 4 Di : ca 25 cm distance to object. 90°. ca 5 cm Eye-Lens 90° LAMPE01.ppt; P1/2.

8. VIEWING ANGLE ca 5 cm LAMPE01.ppt; P2/2 ca 90° Due to the viewing angle of the human eye a lens height of min 14 cm and a width of min 18 cm is necessary Only this will avoid failures in optical test (performance!) and eyepain or even damage!

9. ca 90° Ca 5 cm View from the top of the head LAMPE01.ppt; P2/2 ca 90° Left eye Right eye Due to the viewing angle of the human eye a lens height of min 14 cm and a width of min 18 cm is necessary Only this will avoid failures in optical test (performance!) and eyepain or even damage!

10. Conclusium: Employees are expensive Employees are expensive failures are expensive failures are expensive Not recognized failures are even more expensive Not recognized failures are even more expensive Comparingly to these cost a good magnifier is cheap Comparingly to these cost a good magnifier is cheap Not using magnifiers will not increase the yield of Not using magnifiers will not increase the yield of inspection inspectionFazit: If size and quality of a lens and its illumination will not be sufficient - easily a lower inspection yield can be monitored, resulting therefore in higher production cost/piece. Often followed by eyepain, pending eyedamage or lung damage for the operator when soldering under a lens If size and quality of a lens and its illumination will not be sufficient - easily a lower inspection yield can be monitored, resulting therefore in higher production cost/piece. Often followed by eyepain, pending eyedamage or lung damage for the operator when soldering under a lens

11. The solution for all day use The solution for real use and real performance The Big Eye 20cm 15cm 19,5cm

12. BIG EYE2, A5-300 Part. No. 72400 3 Diopters, according to MIL 3 Diopters, according to MIL ergonomic lenses for ergonomic lenses for eyerelaxing and high eyerelaxing and high inspection yields inspection yields 15 x 20 cm lens (300cm²) 15 x 20 cm lens (300cm²) optical glass optical glass stroboscopfree Illumination stroboscopfree Illumination electronic dimmer electronic dimmer optional antireflective coating of lenses, optional antireflective coating of lenses, 4 Di, UV and yellowlight bulbs 4 Di, UV and yellowlight bulbs

13. BIG EYE Art.Nr. 52400 transformer Art.Nr. 62400 Electronics 3 or 4 Dioptrien (MIL) 3 or 4 Dioptrien (MIL) ergonomic lenses for ergonomic lenses for eyerelaxing and high eyerelaxing and high inspection yields inspection yields 19,6 cm diameter 19,6 cm diameter (ca 300cm²) (ca 300cm²) optical glass optical glass stroboscopfree stroboscopfree illumination with 62400 illumination with 62400 optional antireflective coating of lenses, optional antireflective coating of lenses,

14. Bulbs special high-power 34 W bulbs special high-power 34 W bulbs very high illumination > 2400 Lux very high illumination > 2400 Lux dimmable 100 - 25%! dimmable 100 - 25%! Colors Cool-white Cool-white Glarefree Glarefree yellowlight yellowlight UV UV with 72400 & 62400 with 72400 & 62400 stroboscopefree! stroboscopefree!

15. The unique solderfume-exhausting The unique solderfume-exhausting cold-light-illuminated magnifier! cold-light-illuminated magnifier!

16. The Multi-Lite Part.No. 82400 A5-300cm²-lens, 15 x 20 cm, 3 or 4 Di A5-300cm²-lens, 15 x 20 cm, 3 or 4 Di optional antireflective coating of lenses, optional antireflective coating of lenses, Cold-light by chips Cold-light by chips electronic dimmable 0-100% electronic dimmable 0-100% lightsource will live „forever“ lightsource will live „forever“ as good as EMR-free as good as EMR-free 24VDC (Ex-safe) 24VDC (Ex-safe) Membrane-switchboard Membrane-switchboard integrated solderfume-extraction! integrated solderfume-extraction! The only full solution for The only full solution for workingplace evaluation workingplace evaluation when inspecting & soldering when inspecting & soldering

17. Internationality: Made in Austria Made in Austria used worldwide, Eastern Europe, used worldwide, Eastern Europe, steady Inprovments and new developments steady Inprovments and new developments ISO9002, CE, Patents ISO9002, CE, PatentsReferences: Bosch, Alcatel, HP, Motorola, Siemens, Daimler, Cern, Opel, Rockwell, Nokia, Sony, Sagem, and hundreds more.... LICO Industriev. GmbH, A-2320 Kledering/Wien, Klederinger Straße 31 Tel +43-1-70643000 Fax +43-1-7064131 Email h.miksch@lico.at http://www.eurolupe.com