We think you have liked this presentation. If you wish to download it, please recommend it to your friends in any social system. Share buttons are a little bit lower. Thank you!
Presentation is loading. Please wait.
Published byGrant Oakey
Modified over 2 years ago
© Easy Guides Australia The information in this show is for the following crane classes: Non-Slewing Mobile CranesDerrick CranesPortal Boom Cranes Tower CranesVehicle Loading CranesBridge and Gantry Cranes Slewing Mobile Cranes
© Easy Guides Australia Question 2. Calculate the Working Load Limit (WLL) of one of the following: (1) 12mm diameter unidentified synthetic rope. (2) 15mm diameter unidentified synthetic rope. (3) 20mm diameter unidentified synthetic rope. Answer: 12mm = 12 x 12 = 144 kg WLL. Answer: 15mm = 15 x 15 = 225 kg WLL. Answer: 20mm = 20 x 20 = 400 kg WLL. Formula: D =WLL (kgs) Note: Where a manufacturers tag or specification is not supplied for a synthetic rope the formula for fibre rope should apply or be accepted.
© Easy Guides Australia Answer: Question 30. List two effects “double blocking” can have on the crane and equipment. Can cause the FSWR to break Can damage sheave Can cause the load to drop Can cause structural damage to the crane
© Easy Guides Australia Answer: Question 72. What details are displayed on a spreader / lifting beam? (List at least three). TARE – 250kg SWL 25t EGA-2005 Tare weight of the beam. Approval plate. SWL / WLL. Registration number.
© Easy Guides Australia Answer: 5,086 kg. Question 102. Find the total weight of a load made up of the following: 4 universal beams each 8 metre long; 15 scaffold planks each 4.4 metres long; 2 mild steel plates 4 metres long and 0.5 metres wide. One metre of universal beam weighs 125 kg One metre of scaffold plank weighs 7 kg One square metre of mild steel plate weighs 156 kg Workings: (4 x 8 x 125) + (15 x 4.4 x 7) + (2 x 4 x 0.5 x 156) = 5086kg
© Easy Guides AustraliaQLD Vet Edition QLD Licensing Pathway MAIN MENU Introduction SECTION 1 – Slings SECTION 2 – Sheaves and Drums SECTION 3 – Rope Terminations,
5. Dismantle Structures and Plant 4. Erect Structures and Plant 3. Set Up Task 2. Select and Inspect Equipment 1. Plan Job QUIT EASY GUIDES AUSTRALIA PTY.
© Easy Guides Australia The information in this presentation is for the operation of Non-slewing mobile cranes of: a powered mobile crane which incorporates.
© Easy Guides Australia A boom-type elevating work platform means; a powered telescoping device, hinged device or articulated device or any combination.
© Easy Guides AustraliaQLD Vet Edition New Queensland Licensing Pathway MAIN MENU Introduction SECTION 1 – Conduct routine checks SECTION 2 – Plan work.
© Easy Guides AustraliaQLD Vet Edition New Queensland Licensing Pathway MAIN MENU Introduction SECTION 1 – Site Hazards SECTION 2 – Cranes SECTION 3 –
WEEK OF NOVEMBER TH GRADE HOMEWORK- Read Fungi Section (Study for Reading Quiz Friday) DUE MONDAY- KINDOM PROTISTA AND KINDGOM FUNGI READING.
4. Move the load 3. Plan the move 2. Check the hoist 1. Prepare for hazards QUITQUIT EASY GUIDES AUSTRALIA PTY LTD Quiz 5. Shut down.
C-shaped steel beam pulley cable pulley lifting and installation work status.
Physics 6B Stress, Strain and Elastic Deformations Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB.
Factor. Warm-Up Exercises 1. x 2x 2 2x2x+48 – ANSWER () 8+x () 6x – 2. 9y 29y 2 27y20 + – ANSWER () 43y3y – () 53y3y – 3. 2y 22y 2 16y32 + – ANSWER ()
Moments of Inertia Polar moment of inertia – Used when calculating the torsion – Indication of resistance to torsion – Solid Shaft – J = π R 4 / 2 Area.
5. Set up the crane 4. Plan the lift 3. Check the crane 2. Communicate clearly 1. Prepare for hazards QUIT EASY GUIDES AUSTRALIA PTY LTD
1 OVERHEAD CRANE SAFETY F&T Inc.. 2 OVERHEAD AND GANTRY CRANE OPERATION Hoist operators must inspect equipment daily before use. Do not operate a crane.
Introduction to building Estimating in South Australia 1.
GCSE Higher Revision Starters 11 Module 3 and 5 Revision.
Bounds Bingo. Pick 8 from the list percentagelower error bound upper bound.
Crane Fundamentals Lifting Safety BY - ALEX MATHEW HSE ENGINEER LAHOUD ENGINEERING CO.
Fractions Simplify: 36/48 = 36/48 = ¾ 125/225 = 125/225 = 25/45 = 5/9 8/12 = 8/12 = 2/3 Simplify: 75/250 = 75/250 = 3/10 125/250 = 125/250 = ½ 3/225 =
5. Dismantle Scaffold and Scaffold Equipment 4. Erect Scaffold and Scaffold Equipment 3. Set Up Task 2. Select and Inspect Plant and Equipment 1. Plan.
Health and Safety Executive Health and Safety Executive Dropped Objects Update September 2013 Donald Dobson Health & Safety Executive Offshore Division.
EXAMPLE 3 Use synthetic division Divide f (x)= 2x 3 + x 2 – 8x + 5 by x + 3 using synthetic division. –3 2 1 –8 5 –6 15 –21 2 –5 7 –16 2x 3 + x 2 – 8x.
Ure đ aji za montažu Transporteri, lansirne rešetke.
Types of Number. Prime Numbers Prime numbers are numbers that only divide by themselves and 1 1 is not a prime number because it can only be divided by.
PULLEYS How they work MANUFACTURING ENGINEERING DEPARTMENT.
Multiplication and Division Rules to help!. Multiplication and Division are opposites See the Family of Facts: 4 x 3 = ÷ 3 = 4.
GLAST LAT Project Page 1 ACD Installation, Post LAT CDR Response to GLAST LAT CDR RFA Number 13: MGSE Detailed Dimension Study [for ACD Installation] –A)
HOW TO FIND THE SQUARE ROOT OF A NON-PERFECT SQUARE.
GLAST LAT ProjectMarch 08, 2004 Page 1 ACD Installation, Post LAT CDR Response to GLAST LAT CDR RFA Number 13: MGSE Detailed Dimension Study [for ACD Installation]
Mental Mind Gym coming …. 30 Second Challenge - Advanced Additive.
Chapter 3 Excavating and Lifting Part CRANES Heavy Lift Cranes Tower Cranes Job Management.
Module Floor Systems. 1. What is the name of the type of construction where each floor of a structure is built as an individual unit (Page 5.2,
© Easy Guides Australia a work platform consisting of a work basket (platform), lifting mechanism and chassis that can raise and lower people and materials.
FCC layout: lifts & cranes Ingo Rühl / EN-HE FCC Infrastructure & Operation Meeting 17 December 2014.
Square Root Chapter 9. Warm-up (1) 4 m – 3 = m + 15 (2) 6y – 2 = 2y + 18 (3) 6t + 3 = 3t + 15 (4) 8r – 7 = 3r + 23 (5) 10 w – 9 = 3w + 33 (6) 9f + 14.
Quadratics B-I-N-G-O. Directions 1.Each student will fill out a BINGO card with the following ordered pairs in any block without repeating. 2.To play,
Plain & Reinforced Concrete-1 CE3601 Lecture # 13, 14 &15 13 th to 20 th April 2012 Flexural Analysis and Design of Beams (Ultimate Strength Design of.
Spacerack Storage Centre (Australia) Pty. Ltd. A.C.N Distributors of Spacerack Storage Systems Selective Pallet Racking The principle behind.
Plan job Select and inspect equipment Prepare site and equipment Perform task Shut down and clean up How to use this presentation.
EXAMPLE 6 Write a quadratic function in vertex form Write y = x 2 – 10x + 22 in vertex form. Then identify the vertex. y = x 2 – 10x + 22 Write original.
Types of Cranes EOT / Gantry Cranes: Double & Single Girder Crane Wall Traveling Jib Crane Application: Steel Plant, Nuclear Plant etc Capacity of Cranes.
9/17/2013PHY 113 C Fall Lecture 71 PHY 113 C General Physics I 11 AM – 12:15 PM MWF Olin 101 Plan for Lecture 7: Chapter 7 -- The notion of work.
5. Shut Down Job and Clean Up 4. Perform Task 3. Prepare Site and Equipment 2. Select and Inspect Equipment 1. Plan Work QUIT EASY GUIDES AUSTRALIA PTY.
1 Lesson Areas of Complex Shapes Areas of Complex Shapes.
Lifting with Equipment During assembly operations it may be necessary to lift or move heavy equipment. The equipment used to achieve this is covered by.
PROJECT 100. PROJECT 100 DESIGNED TO BE: Cost Effective Compact Strong Simple Light Reliable.
FHM TRAINING TOOLS This training presentation is part of FHM’s commitment to creating and keeping safe workplaces. Be sure to check out all the training.
DROPS Forum - BP Trends in North Sea Drilling Sean Young Wells HSE Advisor Marcliffe Hotel April 2011.
Carpentry & Joinery Phase 4 Module 1 Unit 13 Powers, Roots & Indices Sample Questions & Solutions.
SAFE HANDLING OF PRECAST CONCRETE PRODUCTS. Safety Handling of Precast Concrete Products The lifting of any precast product requires the use of special.
© 2016 SlidePlayer.com Inc. All rights reserved.