1. SIRIUS Safety Controls
Sicherheit liegt im System
Von der Sensorik über die Auswerteeinrichtungen bis hin zur sicheren Abschaltung – in Zukunft auch in die Aktoren hinein, wie z.B. Antriebe - bietet Safety Integrated mit den Produktgruppen SIGUARD, SIMATIC und SINUMERIK/SIMODRIVE einen hoch wirksamen Personen- und Maschinenschutz. Sie bauen Schritt für Schritt aufeinander auf.
Das Logo ist ein Kennzeichen der Produkte aus diesen Produktgruppen, die mit Sicherheitsfunktionalität ausgestattet sind.
„Safety Integrated by Siemens“ ist ein eingetragenes Warenzeichen.

2. SIRIUS Safety Controls
SIRIUS E-STOP devices SIRIUS Interlock switches SIRIUS Hinge switches SIRIUS Cable Pull Switches
SIRIUS Magnet Switches
SIRIUS Two-Hand Controls
Popular designs for E-STOP circuits and machine guarding
Door guarding applications - Interlock with separate actuator - Interlock with Solenoid locking / unlocking - by non contact (Magnetic coded)
Two Hand Controls stations
SIRIUS Safety Control product range is applicable for applications Cat. 1 to Cat. 4 (EN954-1)
Safety Controls should always be used in conjunction with a Safety Relay or other safety rated modules such as ET200S / M / Eco distributed I/O or S7 Failsafe PLC’s

3. Class 52 NEMA 4X Corrosion Resistant E-Stops
Class 52 4X Corrosion Resistant
Class 52
NEMA 4X
Corrosion Resistant
E-Stops

4. Class 52 4X Corrosion Resistant
Epoxy coated devices for
caustic and corrosive
environments.
Self-protected against the ravages of industry’s harshest environments.
Heavy duty die cast parts shielded with epoxy coatings.
Perform reliably year-in and year-out under corrosive and caustic conditions.

5. 3SB3 E-Stops 32mm 40mm 60mm Project: Status:
E-Stop operator with and 60 mm heads
Plastic and metal versions
32mm Metal= 3SB3500-1FA20
Plastic=3SB3000-1FA20
40mm Metal= 3SB3500-1HA20
Plastic=3SB3000-1HA20
60mm Metal=3SB3500-1AA20 Plastic=3SB3000-1AA20
Status:
Available in stock

6. New 3SB3 40MM E-Stop with Flat Head
This new e-stop has a flat mushroom head shape that many of our customers are familiar with and is similar to our push-pull operators. It is currently only available in plastic and it does carry the EN 418 rating
3SB3000-1XA20

7. Emergency Stop: Safety guaranteed
SIGNUM 3SB3 AS-Interface (ASIsafe)
Emergency Stop: Safety guaranteed
High level of safety with emergency stop pilot devices
Mechanical latching function acc. to EN 418
Positive opening of NC elements
Twist-to-release feature
Also available with safety key lock
Ergonomically shaped
TÜV listed

8. Product Overview 3SE2 / 3SE3 Safety Limit and Interlock Switches
Safety Controls
SIRIUS 3SE2 3SE3 Safety Limit and Interlock Switches
3SE2120
3SE2100
3SE2230
3SE2200
3SE224
3SE28
3SE37

9. SIRIUS Position Switches Suitable for Safety applications*
NC- contacts with direct opening action, acc. IEC
For use up to category 4 acc. EN954-1 when used with redundancy (i.e. two switches per door)
Economical, electronic compatible, electrically isolated moveable double contacts
High contact reliabillity even with low voltages and currents, e.g. 5V DC / 1mA
Ambient temperature from -35° to +85°C
High mechanical endurance, 30 million make-break operations
Actuator versions for all kinds of application
High degree of protection IP 67
Available in AS-Interface connection
Metal Versions
Plastic Versions
* Only when direct opening contacts are used. See the symbol
* Use of adjustable length and rod type actuators are not allowed in safety applications

10. Most Popular Interlock Switches
For use in door interlock (safety) circuits according to EN1088, up to cat. 4
Positive opening action contacts according to IEC
Either 4 or 5 directions for actuator approach on most models
1 to 3 switching contacts
Standard, Lateral and radius actuators
Housing widths of 31, 40 and 52mm.
Metal or Plastic housings with IP65 / IP67
Some versions with M12 connector
Up to 30 Million mechanical switching operations
Ideal for use in hard-wired, ASIsafe or PROFIsafe distributed networks and SIMATIC F-PLC systems

11. SIRIUS Interlock Switches with Seperate Actuator

12. SIRIUS Interlock Switches with Seperate Actuator

13. SIRIUS Interlock Switches with Seperate Actuator Solenoid locking or unlocking
Metal Enclosure 3SE28
Plastic Enclosure 3SE37
For use in safety circuits according to EN1088, up to cat. 4
Safety door locking / unlocking on machine tools with speed monitors
Solenoid locking or unlocking versions
270 / 450lbs locking force
Either 4 or 5 directions of approach
2 or 4 switching contacts
Standard, lateral and radius actuators
Available with AS-Interface adaptors for connection to ASIsafe networks

14. SIRIUS Interlock Switches with Seperate Actuator Solenoid locking or unlocking

15. Actuator‘s for Solenoid locking or unlocking units
For 3SE283 / 84 versions
For 3SE375 / 76 and 3SE385 / 86 versions

16. SIRIUS Interlock Switches with Seperate Actuator Solenoid locking or unlocking

17. Positive Mode Mounting for Interlock’s
Incorrect Method
Closed
Open

18. Positive Mode Mounting for Interlock’s
Correct Method
Actuator is forced open by the
External force of the sliding door
Closed
Open

19. SIRIUS Safety Hinge Switches
Sleek low profile and compact design
Used for perimeter protection on guard doors
Tamper resistant
Positive opening action Normally Closed contacts
IP65 and IP66 enclosures

20. SIRIUS Safety Hinge Switches
Advantages
Mounting options: with integrated hinge on hinge axis on hinged flaps
Very small angles to switching point o or 8o to open slow action contacts ° or 15o to open snap action contacts
Applications
monitoring hinged doors
up to category 4 acc. EN954-1

21. SIRIUS Hinge Switch Applications

22. SIRIUS 3SE7 Cable Pull Switches
Plastic and metal enclosures
Rope lengths up to 165’ with pretension
Rope Lengths up to 400’ without pretension
Two direction units with rope lengths of up to 165’ each direction (330’ total span)
Can be used as a safety switch for conveyor systems or production lines, or as a signaling switch (without latching)
Switches with 24VDC and 120VAC LED indicators
Available with AS-Interface adaptors for connection to ASIsafe networks
New model
Integrated E-Stop
Competes against
AB Life Line 4

23. SIRIUS Rope-Pull Switch application

24. LifeLine 4 vs. 3SE7141
3SE7141
LifeLine 4

25. Safety Magnet Switches
Advantages:
System comprising of a magnet and switching element
3 different versions, IP67 rated
AC or DC voltage
Ideal for connection to safety networks and Safety PLC‘s
Single channel or Six channel evaluation units for cat. 3 or cat. 4 applications

26. Safety Magnet Switches

27. New Multi-Magnetic Switch Relay 3SE6806-2CD00
Up to 6 sensors can be connected
24V DC operating voltage
For 1NC/1NO magnetic switch types
6 PLC signal outputs, each 20 mA for individual door annunciation
2 enabling circuits, relay output
Cat. 3 according to EN 954-1
UL / CSA approval

28. Safety Magnet Switches 3SE6 Switching Ranges

29. Safety Magnet Switches 3SE6 Application as door switch

30. Two Hand Control Systems
Compliant with DIN (EN 574)
Console is rated at IP65
Applicable to Category 4 according to EN 954-1
4 or 8 control devices can be additionally mounted at the center of the operation console
Plastic or die-cast aluminum housing
Console mounting on stand or directly at the machine

31. Two Hand Control Systems Connection possibilities

32. Two Hand Control Systems
Two Hand control systems, when used as the primary means of personnel safeguarding shall:
Be designed to prevent accidental or unintentional operation
Have the individual operator’s hand controls arranged such that both hands must be used, and both circuits must be activated within 500ms to initiate / cycle the machine.
Requires individual hand controllers for each operator when multiple operators exist

33. ASIsafe and Profisafe Safety Networks
Safety on a bus network saves overall costs!!

34. ASIsafe and Profisafe Safety Networks
SIMPLIFIED SAFETY
Safety networks provide savings at OEM’s and End Users:
Considerable wiring reduction
Labor savings
Increased diagnostics of safety components
Simpler maintenance
Increase machine availability
Higher production output
SIRIUS Safety Controls are ideal for:
Connection to safety networks
Pull through on your automation sale

35. AS-Interface Distributed Configuration Safety at Work
Standard PLC and standard master
Safety monitor
Safe emergency stop button
Safe module
Standard module
AS-i
power unit
Safe light grid
Safe position switch
Safe light barrier
Standard module

36. AS-Interface Distributed Configuration Safety at Work
Standard PLC and standard master
Safety monitor
Safe emergency stop button
Safe module
Standard module
AS-i
power unit
Safe light grid
Safe position switch
Safe light barrier
Standard module

37. AS-Interface Distributed Configuration Safety at Work
Gateway to AS-Interface
Safety monitor
Safe emergency stop button
Safe module
Standard module
AS-i
power unit
Safe light grid
Safe position switch
Safe light barrier
Standard module

38. Safety Controls for Safety Networks (ASIsafe)
E-Stop Switches
Limit Switches
Interlock Switches
Rope Pull Switches
Refer to the Controls Catalog or the IKPI Catalog
for additional units or contact product marketing
for the latest offering