1. A UTO S AFETY T EST Part 2 - Tools

2. W HY USE THE RIGHT TOOL FOR THE JOB ? Neatness Precision Efficiency Safety

3. W HY USE THE RIGHT TOOL FOR THE JOB ? Neatness Precision Efficiency Safety

4. G IVE SOMEONE A TOOL SO THEY CAN : Take it by the handle Catch it if it falls Take the point or edge first Take it with both hands

5. G IVE SOMEONE A TOOL SO THEY CAN : Take it by the handle Catch it if it falls Take the point or edge first Take it with both hands

6. T OOLS IN YOUR POCKET CAN : Injure and damage clothes and upholstery Get lost and be charged to you Dropped on the floor and break Get in the way when working

7. T OOLS IN YOUR POCKET CAN : Injure and damage clothes and upholstery Get lost and be charged to you Dropped on the floor and break Get in the way when working

8. T OOLS MUST BE : Used with gloves Kept clean and free of dust, oil and grease Kept covered Wiped with friction oil

9. T OOLS MUST BE : Used with gloves Kept clean and free of dust, oil and grease Kept covered Wiped with friction oil

10. T OOLS YOU RE FINISHED WITH SHOULD BE : Stacked neatly on the bench Put under the bench Passed on to someone else Returned to where they belong

11. T OOLS YOU RE FINISHED WITH SHOULD BE : Stacked neatly on the bench Put under the bench Passed on to someone else Returned to where they belong

12. D RAWERS AND CABINETS SHOULD BE : Kept closed Painted red Clearly labeled Avoided

13. D RAWERS AND CABINETS SHOULD BE : Kept closed Painted red Clearly labeled Avoided

14. T OOLS LEFT ON LEDGES AND FENDERS COULD : Get lost Fall on someone Get dirty Look messy

15. T OOLS LEFT ON LEDGES AND FENDERS COULD : Get lost Fall on someone Get dirty Look messy

16. T OOLS SHOULD NOT BE LEFT STICKING OVER AN EDGE BECAUSE : It looks unprofessional Someone could bump into them They could get broken They could damage the bench

17. T OOLS SHOULD NOT BE LEFT STICKING OVER AN EDGE BECAUSE : It looks unprofessional Someone could bump into them They could get broken They could damage the bench

18. H ARDENED TOOLS HIT TOGETHER : Could chip and scatter the pieces Make too much noise Might break the handle Softens the metal

19. H ARDENED TOOLS HIT TOGETHER : Could chip and scatter the pieces Make too much noise Might break the handle Softens the metal

20. W HEN USING POWER TOOLS, DO NOT : Use only power tools that have been properly grounded Disconnect the power tool when you are done Hold the work with one hand while using the tool with the other Keep the cord away from oil and sharp objects

21. W HEN USING POWER TOOLS, DO NOT : Use only power tools that have been properly grounded Disconnect the power tool when you are done Hold the work with one hand while using the tool with the other Keep the cord away from oil and sharp objects