Presentation on theme: "Hooking up a Promethean ActivBoard to a Laptop Model # PRM-AB387-03 In partial completion of MEDT 7477 For Dr. O.P. Cooper By Has Slone (28 February 2012)"— Presentation transcript:
Hooking up a Promethean ActivBoard to a Laptop Model # PRM-AB387-03 In partial completion of MEDT 7477 For Dr. O.P. Cooper By Has Slone (28 February 2012)
Equipment to be used Dell Laptop Promethean ActivBoard Model # PRM-AB387-03
Cables to be used for the laptop Blue male end of a monitor cable and the flat, rectangular tipped USB 2.0 cable. Dell laptop connected
Cables to be used for the Promethean ActivBoard Blue male end of a monitor cable and the rounded rectangular part of a USB 2.0 Cable (like the one used for printers) Attachment panel on Promethean ActivBoard
Equipment connected LaptopPromethean ActivBoard
Power Up! Turn on the laptop Turn on the Promethean Board
Assuming the Activinspire software is loaded on your computer…… Double click on the Activinspire logo on your desktop.
Activeinspire is activated Activinspire is loading, (the picture on the laptop is the same). Activinspire is loaded and ready to be used.
Check the calibration of the Activpen before using the ActivBoard. 1)With both the ActivBoard and the computer on, hold the tip of the pen lightly on the ActivBoard, without pushing in the Activnib. 2)The cursor should line up with the tip of the Activpen….if not, follow directions on the next slide to calibrate it.
Calibration of the ActivBoard Pen 1)Hold Activpen close to the indicator light. After a moment, you should hear a beep and the board will turn white and display the following message. 2)Click once anywhere on the board to start the activation process. 3)A series of 5 small crosses will appear one at a time in a clockwise order around the edges of the ActivBoard. 4)As each one appears, tap the nib of the Activpen in the center of the cross each time. 5)After you have clicked the 5 th cross, the calibration process will be complete and you can go back to the Activinspire pane ready to work.
Adding the Promethean ActivInspire software to the Laptop http://www.prometheanplanet.com/e n/support/ To download ActivInspire Software. As you process the software, you will need the information located below. It is available on the back side of the Promethean board.
http://www.prometheanplanet.com/en/support/ http://www.prometheanplanet.com/en/support/ This is the site to download the Activinspire software
Choose the English (US)
Click on the Download page for Activinspire
Register or login page
This is the next window…dont click download yet…scroll to the bottom and look at left side.
Click Hardware and enter the code found on the back of the Promethean ActivBoard (they are case sensitive)…..(Serial # C1107130221) AND ( Product Code ABV387PRO) and click……..Validate
This is your validation page. Cursor down and look on the left side.
This is your Activinspire serial number for a Professional Edition of the Activinspire software for your use. You can also download the software for home use. Copy this serial number for future use.
After clicking windows version under the serial number from the last page, this is your prepare to download and save file…..
Assuming the Activinspire software is loaded on your computer…… 1)Double click on the Activinspire logo on your desktop. 2)Check and /or Calibrate the Activpen and the ActivBoard as shown in a previous slide….. 3)At this point all of the potential of the board should be available to you!
Activinspire is activated Activinspire is loading, (the picture on the laptop is the same). Activinspire is loaded and ready to be used.