1. 17 May 20041 Multiple Sites

2. 17 May 20042 Multiple Sites This presentation assumes you are already familiar with Doors and all its standard commands It covers the changes that appear in Doors software when multiple sites are enabled and configured

3. 17 May 20043 What is Multiple Sites? Configuring Doors to manage access control for multiple sites –Each site is handled individually –All sites can be managed from one Doors installation on one PC –All sites information is stored in one common database

4. 17 May 20044 What is Multiple Sites? Configuring Doors to manage access control for multiple sites –Any Doors task can be performed on any controller on any networked site –However, you can communicate with, monitor, or edit only ONE site at a time

5. 17 May 20045 Locate the Multiple Sites Option Click the button or Select the Setup > System pull-down menu option Click the System Options tab

6. 17 May 20046 Enable Multiple Sites Mode Enable multiple sites mode by clicking in the Sites ON check box

7. 17 May 20047 Confirm Multiple Sites Mode Confirmation is required to enable multiple sites –Several Doors databases are affected by this change Click the button to enable multiple sites

8. 17 May 20048 Save Multiple Sites Mode Click the button to ensure multiple sites mode is saved –If you exit without saving, multiple sites mode is not enabled

9. 17 May 20049 Sites Tab Once multiple sites has been enabled a Sites tab is added to the Setup > System window

10. 17 May 200410 Enter Site Specific Information Enter site specific information in the provided fields Use the scroll bar to access off-window fields

11. 17 May 200411 Name and Address Site Name – enter a descriptive name for the site –The Site Name always remains on screen, the other columns will scroll on or off with the scroll bar Site Address – enter the sites street address

12. 17 May 200412 Site Number and PIN Site Number – assigned by Doors, not editable PIN – enter a site Personal Identification Number if desired –The PIN is a password number that provides an extra level of security

13. 17 May 200413 Network Configuration Changes - Modem The conversion to Sites mode changes the location for setting Network Configuration parameters –The host PC parameters remain in the Network Configuration tab –The site specific parameters move to the Sites tab

14. 17 May 200414 Network Configuration – Modem These two fields are displayed for sites using modems for communication Phone Number – enter the site modems telephone number Modem Init – enter the modems initialization string, if needed (the default string usually works fine)

15. 17 May 200415 Network Configuration Changes – TCP/IP The conversion to Sites mode changes the location for setting Network Configuration parameters –The host PC parameters remain in the Network Configuration tab –The site specific parameters move to the Sites tab

16. 17 May 200416 Network Configuration – TCP/IP These two fields are displayed for sites using TCP/IP Ethernet communication TCP/IP Address – enter the LAN units TCP/IP address in standard dot notation Remote Port Number – enter the LAN units remote port number: 10001 for LAN-50/500, 3001 for LAN-100

17. 17 May 200417 Global Secure and Unlock Enable Global Secure Time – enter the time-of-day when all non time zone controlled doors should be locked Global Unlock Enable – select if a signal on the global unlock input is allowed to immediately unlock all doors (master controller only) –Not to be used for fire exit control

18. 17 May 200418 Global Lock Enable and Comment Global Lock Enable – select if a signal on the global lock input is allowed to immediately lock all doors (master controller only) Comment – enter a descriptive comment about the site

19. 17 May 200419 Adding Sites Click the button to add new sites to the sites database

20. 17 May 200420 New Site Information Enter site information for each new site as described in slides 8 through 15

21. 17 May 200421 Multi-Site Changes in Doors Changes are made in the following program and database operations when in multi-site mode: –Select Site button added to the toolbar –Access group wizard –Net update –Quick search reports –Setup users spreadsheet

22. 17 May 200422 Displaying Site Information The button appears on the tool bar when multiple sites mode is enabled Click this button to display a list of available sites The name of the current site is displayed on the title bar

23. 17 May 200423 Selecting Site to Display Scroll through the list and locate the site you wish to display Click on that site name Click on the button Information for the selected site is now displayed in Doors

24. 17 May 200424 Switching Sites While Connected If you are connected to one site and attempt to perform a command on a different site, you will be prompted to confirm the old-site disconnection/new- site reconnection Click the button to switch sites

25. 17 May 200425 Site Access Groups Open the Access Groups window by either clicking on the button OR Click on the Access Groups pull-down menu option

26. 17 May 200426 Access Group Changes A new window is added near the beginning of the Access Group wizard –This allows Access Group settings to be limited to individual sites or be applied to all sites

27. 17 May 200427 Site Access Groups Access Groups will now require you to click on the site icon(s) to be applied

28. 17 May 200428 Multi-Site Update Open the Site Update window by either clicking on the button OR Click on the Operate > Update Network pull- down menu option

29. 17 May 200429 Sites to Update A new column is added to the Update Network spreadsheet –All recognized sites are listed in this column Update status is displayed for each site –Is an update required Yes/No?

30. 17 May 200430 Type of Update by Site The type of update for each site can be individually selected –Click to perform a smart or total update –Click to skip an update or event collection –Click to collect events

31. 17 May 200431 Update Results Update results are displayed by site

32. 17 May 200432 Quick Search Reports by Site To open the Quick Search Event Report window, Click on the Reports > Searchable Events pull-down menu option Then click on the Quick Search tab

33. 17 May 200433 Quick Report Changes Site selection radio buttons are added at the top of the Quick Search window –This allows quick searches to be limited to individual sites or be applied to all sites

34. 17 May 200434 User Management Changes Multi site mode allows user access parameters to be applied to one site or to all sites Before assigning user parameters, verify the user spreadsheet is set properly The Setup Users window title bar shows which site mode the users spreadsheet is in

35. 17 May 200435 Managing Users at One Site This Setup Users spreadsheet is set to apply user parameters for one site –The title bar for the Doors program window shows the Site name –The title bar for the Setup Users window confirms the spreadsheet is in One Site mode –Click the button to switch to All Sites mode

36. 17 May 200436 Managing Users at All Sites This Setup Users spreadsheet is set to apply user parameters for all sites –The title bar for the Setup Users window confirms the spreadsheet is in All Sites mode –Click the button to switch to One Site mode

37. 17 May 200437 Deleting a Site A site can be deleted from all the Doors databases –Use this command with extreme caution! If a site is removed, all site related database information is deleted and is NOT recoverable –Any site on the list can be deleted (it does not have to be the last entry on the list) –Site databases will reconfigure to accommodate any changes

38. 17 May 200438 Select the Site Click on the Site Name for the site to be deleted Click on the button

39. 17 May 200439 Confirm Site Deletion Because of the affect on Doors databases, you must confirm the deletion Click the button.

40. 17 May 200440 Site Deleted The site is deleted

41. 17 May 200441 Disabling Multi-Site Mode Multi-site mode can be disabled entirely, returning all Doors databases to a single site –Use this process with extreme caution! Once sites are removed and multi-site mode is disabled, all site related database information is deleted from Doors and is NOT recoverable

42. 17 May 200442 Delete Unneeded Sites To disable multi-sites mode you must delete all unneeded sites, leaving one remaining site Follow the process previously described to delete all unneeded sites, leaving one site

43. 17 May 200443 System Options Click on the System Options tab Click on the Sites button to display the Sites ON check box Click on the Sites ON check box and clear the check mark

44. 17 May 200444 Save Sites Mode Change Click the button to save this change