1. Amazon VRF Products Overview

2. Product Lineup

3. Product Lineup Offers Overview
T1 Mini VRF Outdoor
T1/T3 Modular VRF Outdoor
Broad Indoor Offering
Note: The capacity mentioned in following pages is basically for cooling

4. V Product Lineup T1 Mini VRF Outdoor Units
Side Discharge Mini VRF Outdoor Units
Dual Frequency 50/60Hz
DC Inverter Rotary Compressor
BLDC Fan ( BrushLess DC motor )
10kW
Nominal cooling capacities are based on the following conditions:
AHRI1230
Cooling-indoor 26.7℃DB/19.4℃WB and Outdoor 35℃DB/23.9℃WB
Heating-indoor 21.1℃DB/15.6℃WB and Outdoor 8.3℃DB/6.1℃WB
*: EER is W/W
15/18kW
Note: 1hp is 2.8kW, 1TR is 3.52kW, and 1kW is 3.41kBtu/h

5. V Product Lineup T1 Modular VRF Outdoor Units
Top Discharge Modular VRF Outdoor Units
Dual Frequency 50/60Hz - 380V, 60Hz - 230V
DC Inverter Scroll Compressor & BLDC Fan
5 Basic Modular Units: 8hp, 10hp, 12hp, 14hp, 16hp
Free Combination Up to 48hp with incremental 2hp, max.
Indoor units up to 64
8/10hp
Nominal cooling capacities are based on the following conditions:
AHRI1230
Cooling-indoor 26.7℃DB/19.4℃WB and Outdoor 35℃DB/23.9℃WB
Heating-indoor 21.1℃DB/15.6℃WB and Outdoor 8.3℃DB/6.1℃WB
12/14/16hp
Note: 1hp is 2.8kW, 1TR is 3.52kW, and 1kW is 3.41kBtu/h
*: EER/COP is W/W

6. V Product Lineup T3 Modular VRF Outdoor Units
Top Discharge Modular VRF Outdoor Units
Dual Frequency 50/60Hz
DC Inverter Scroll Compressor & BLDC Fan
3 Basic Modular Units: 8hp, 10hp, 12hp
Free Combination Up to 36hp with incremental 2hp, max.
Indoor units up to 36
High Ambient Operation Up to 52 ℃
8hp
Standard Nominal cooling capacities are based on the following conditions: return air temperature: 29°CDB, 19°CWB, and outdoor temperature: 46°CDB, 24°CWB equivalent
But our rating condition is: *
AHRI1230
Cooling-indoor 26.7℃DB/19.4℃WB and Outdoor 35℃DB/23.9℃WB
Heating-indoor 21.1℃DB/15.6℃WB and Outdoor 8.3℃DB/6.1℃WB
*: EER/COP is W/W
10/12hp
Note: 1hp is 2.8kW, 1TR is 3.52kW, and 1kW is 3.41kBtu/h

7. V Product Lineup Indoor Units – Ductless Type 220-230V/1Ph/50-60Hz
Fit for All Outdoor Units
* Total 12 families & 65 of indoor units

8. V Product Lineup Indoor Units – Ducted Type 220-230V/1Ph/50-60Hz
Fit for All Outdoor Units
. Height of low static duct is 220mm
Note: HRV has air flow as its capacity

9. Broad Indoor Offering

10. V Indoor Features High Wall Global Exclusive Front
Stylish Design & LED Display
Built in EEV & Easy to Installation
Without Built-in Drain Pump & Not Available for External Drain Pump
Vitamin C and ESF
Filter Optional
6 Models Ranging from 2.2kW to 7.1kW
2.2/2.8/3.6/.4.5kW
. ESF – Anti Mold, Electronic Static, Active Carbon 3-in-1 filter
5.6/7.1kW

11. V Indoor Features Two Way Cassette Compact Design
280mm Ultra Thin Body
Two Way Air Flow
Quite Operation
Built in High Head Drain Pump
4 Models Ranging from 2.8kW to 5.6kW
2.8/3.6/.4.5/5.6kW

12. V Indoor Features Four Way Cassette
Compact Design, 570mm*570mm Installation Size
Quite Operation
Built in High Head Drain Pump
5~10% Fresh Air Inlet Except for 5.6/7.1/8.0 kW
Branch Outlet Except for 2.8/3.6/4.5kW
9 Models Ranging from 2.8kW to 14kW
2.8/3.6/.4.5kW(Compact)
5.6/7.1/8.0kW
9.0/12/14kW

13. V Indoor Features Console Compact Design & Small Space Occupation
Quite Operation
Air Discharge through Top(Cooling) or Bottom(Heating)
Without Built-in Drain Pump & Not Available for External Drain Pump
4 Models Ranging from 2.2kW to 5.6kW
2.2/2.8/3.6/5.6kW

14. V Indoor Features Floor Ceiling Compact Design Quite Operation
Wide Range Angle Air Flow
ESF Filter Optional
9 Models Ranging from 2.8kW to 14kW
2.8/3.6/4.5/5.6/7.1kW
Ultra Thin Unit Body 199mm
. 100(120 for 11.2/14) degree horizontal and 70 degree vertical air swing
8.0/9.0/11.2/14kW

15. V Indoor Features Slim Low Static Pressure Duct
185mm Height Ultra Thin Design
Built in Drain Pump
Bottom or Rear Air Return
Install With or Without Discharge & Return Plenum
Static Pressure Setting 0/30Pa
6 Models Ranging from 2.2kW to 7.1kW
2.2/2.8/3.6kW
. The most thin design in the industry
19mm Aluminum filter is not provided and should be selected and installed in field.
4.5/5.6/7.1kW

16. V Indoor Features Low Static Pressure Duct
220mm Height Ultra Thin Design
Optional External Drain Pump
Bottom or Rear Air Return
Install With or Without Discharge & Return Plenum
Knock Down Coil From Bottom
Static Pressure Setting 0/20Pa
6 Models Ranging from 2.2kW to 7.1kW
2.2/2.8/3.6kW
19mm Aluminum filter is not provided and should be selected and installed in field.
4.5/5.6/7.1kW

17. V Indoor Features Medium Static Pressure Duct
Built in Drain Pump for 5.6/7.1/8.0kW
Optional External Drain Pump for 9.0/11.2/14kW
Rear Air Return with Plenum
Flexible Discharge Duct Connection
Static Pressure Setting 50/96Pa or 80/120Pa
6 Models Ranging from 5.6kW to 14kW
5.6/7.1/8.0kW
50/96Pa
. 5.6~8.0kW next year will be new height 270mm design
19mm Aluminum filter is not provided and should be selected and installed in field.
9.0/11.2/14kW
80/120Pa

18. V Indoor Features High Static Pressure Duct
Optional External Drain Pump
Rear Air Return With Plenum
Flexible Discharge Duct Connection
Static Pressure Setting 100/196Pa
8 Models Ranging from 5.6kW to 28kW
5.6/7.1/8.0kW
9.0/11.2/14kW
. 8 setting points between 100~196pa
19mm Aluminum filter is not provided and should be selected and installed in field.
22.6/28kW

19. V Indoor Features Fresh Air Unit
Install with Other Indoor Units Together
Static Pressure 100Pa
Operation Range -5~43 ℃
Installed Capacity Must Less Than 30% of Outdoor Units
3 Models Ranging from 14kW to 28kW
14kW
100~180Pa
. The total connection capacity of the indoor units must be between 80% and 100% that of the outdoor units, off coil temperature is certain.
. For cooling is 33CDB/28CWB in and 18CDB out, and heating is 7CDB/-6CWB in and 22CDB out
. For T3, 46CDB in and 33C Out
22.6/28kW
100~200Pa

20. V Indoor Features Heat Recovery Ventilator
Efficient Heat Recovery Air Processing
Heat Recovery Media Element
Is Replacement As Spare part
4 Models Ranging from
150CMH to 1000CMH
Illustration of how it works
Warm, Exhaust Air
from Inside
Pre-heated
Fresh Air to Inside
Fresh Air
From Outside
Exhaust Air
to Outside
. 70% heat recovery efficiency
hrs after installation or 500 hrs cumulative running time.

21. Features & Benefits

22. Features & Benefits Overview
Energy Efficient
Broad and Flexible Indoor Offering
Reliable
Accurate Temperature Control
Modular and Compact Design
- Saves Energy
- Healthy
Environment
- Low Operation
Costs
Comfortable -
Easy to Transport -
And Install
Five Star Features

23. Features & Benefits Energy Efficient
180°vector dc inverter drive technology
High precision control, variable frequency drive from 20 to180Hz
Sine wave current drive, efficiency improve 17% comparing to conventional rectangle wave
Inverter module equipped with heat dissipating fan, enhancing compressor reliability
. Midea 50 steps, Haier 120 steps,
. Motor speed and frequency , n=60f/p
. Power factor is 0.96
. Conventional 120 degree square wave control
Conventional Drive Control
180° Vector Drive Control

24. Features & Benefits Energy Efficient
High efficiency heat exchanging technology
Outdoor high efficiency four way air return heat exchanger design
The compressor and condenser are placed in separated chamber
High efficiency heat exchanger design
Efficient φ8 inner grooved tube and 0.11 hydrophilic aluminum coil fin, corrosion and oxidation resistance treatment

25. Features & Benefits Energy Efficient
High efficiency DC Inverter Scroll Compressor
DC Inverter Scroll Compressor from Mitsubishi Electric
Equipped with a “Frame Compliance Mechanism” that allows movement in the axial direction of the frame supporting the cradle scroll. This greatly reduces both leakage and friction loss, ensuring very high efficiency throughout the whole speed range .

26. Features & Benefits Energy Efficient
64 stage speed adjustment DC Fan Motor
Efficiency increase 45% comparing with AC motor and power input largely decrease
64 stage speed adjustment plus DC inverter drive, stabilizing compressor discharge pressure and suction pressure to ensure high system reliability

27. Features & Benefits Energy Efficient
Two stage deep sub cooling technology
1st stage sub cooling added a sub cooling coil to Condenser
2nd stage sub cooling added a stand alone Sub Cooler
After further cooling, sub-cooling degree can be up to 30℃，with the heat exchanging capacity per unit mass of refrigerant improved by 46% and flow resistance reduced by 55%, and running efficiency improved by 9%
Condenser
1st Stage
2nd Stage

28. Features & Benefits Energy Efficient
Patent flow channel design
Special design of streamline fan , airflow improved by 17.5%, noise reduced 3dB/A compare to previous product
The new fan reduce air loss and increase heat exchange efficiency

29. Features & Benefits Healthy Environment
100% Independent Fresh Air System
Fresh air unit can be installed with other indoor units, and introduce the outdoor fresh air into indoor

30. Features & Benefits Healthy Environment
3-in-1 High Efficient ESF Filter
Effectively purifying indoor air by trapping harmful dust and removing unpleasant odors
Note: ESF filter is only optional for High Wall and Floor Ceiling

31. Features & Benefits Reliable
The first 2-stages oil separation and cross oil return technology in the industry – Inside module
1st stage oil separation: built-in oil separating unit ,greatly reduced the oil from the compressor discharge
2nd stage oil separation: external oil separator to separate the small amount oil from discharge
Cross oil return: on the one hand to ensure the own compressor oil (red line) ,on the other hand to supply the redundant oil to other compressor (blue line)
Oil Separator
Fixed Compressor
Inverter Compressor

32. Features & Benefits Reliable
High pressure difference oil equalization – Among modules
Using the pressure difference between suction and discharge ,to realize fast oil balance between module
Cycle every 15 minutes
Compressor
Suction Line Separator

33. Features & Benefits Reliable
Duty cycle operation to extend the system lifetime (combination model)
The outdoor units operating changes every 24 hours
Outdoor units start in turn and operation time can be balanced
Inverter compressor lifetime can be extend maximum 3 times 1 2 3 2 3 1 3 1 2
. It happens on the condition of always power on
. Always 1#-master module on when from power off to power on
First time operation
Second time operation
Third time operation

34. Features & Benefits Reliable
Backup operation
If one outdoor unit get into malfunction, the other units continue to operate without affecting the whole system
* In cooling mode, if the inverter compressor has malfunction, the module will shutdown, but the whole system will still run
* In heating mode, if the inverter compressor has malfunction, the module will shutdown, and so does the whole system.
* In both cooling and heating mode, if the fixed compressor has malfunction, the module and the whole system will keep running

35. Features & Benefits Comfortable Environment
Low noise and Night silent running
Machinery chamber is separated from air supply chamber; built-in high efficient muffler in the machinery chamber greatly reduce the compressor noise
The night silent running function can be set on the outdoor PCB. The noise can be reduced by 8 dB/A at most
. Night silent running once been set will be running always in Nigh Silent mode
Note: The night silent mode has to be turn on and off manually

36. Features & Benefits Comfortable Environment
Intelligent defrost
Conventional defrost control(left) heating operation after all the outdoor finish the defrost
Amazon outdoor defrosting(right) help each other to accelerate defrosting, not only accelerate defrosting speed, but also reach rapid heating
Defrost rapidly
Defrost clean
Heat support
Module 1
Module 2
Module 3
Indoor temperature fluctuations small
Condenser heat absorption
Condenser heat dissipation

37. Features & Benefits Comfortable Environment
Precise temperature control
DC inverter control, temperature could be controlled precisely within range of ±0.5℃

38. Features & Benefits Modular & Compact Design
Easy transportation
Outdoor footprint only occupy 0.74m^2(8/10hp) and 1.04m^2 (12/14/16hp)
Can lift with elevators and save lots of transport cost and time

39. Features & Benefits Modular & Compact Design
Flexible installation
Long pipe length and large drop
Total 300m liquid refrigerant piping length
Max.175m refrigerant piping length for single way
Max.50m height drop when outdoor unit is above indoor unit
Max.40m height drop when outdoor unit is below indoor unit
Max.15m height drop between indoor units under same outdoor unit

40. Features & Benefits Modular & Compact Design
Outdoor high external static pressure
Up to 50Pa and can be installed at different floors
50Pa ESP
Notes: Condensing fan has 50Pa ESP, can connect up to 5m(10Pa for 1m) exhausting duct.

41. Controllers and BMS

42. Controllers and BMS Solutions Overview
Stand Alone Controllers
Central Controllers
LonWorks Converter
BacNet Converter

43. V Controllers & BMS Functions Overview Stand Alone Controllers
Auto/Cool/Dry/Heat/Fan Mode Setting
Auto/Low/Mid/High Fan Speed Setting
Temperature Setting
Clock and Timer Setting
Central Controllers
Group Control & Unit Control
Weekly and Monthly Timer Management
Power Metering, System Running Recording and Report
BMS Converters
BMS Integration
Failure Code Display, System Running Recording and Report
Remote Monitoring
Central controller can work BMS together, but have to make sure there is only one system working at one time.

44. V Controllers & BMS Individual Controllers Wireless Controller
LCD Display
Standard offer for High Wall and Console Units
Optional for Duct, Cassette and Floor Ceiling Units
Wired Controller
Standard offer for Duct, Cassette, Floor Ceiling,
and Fresh Air Units
Not optional for High Wall and Console Units
Can also work as a group controller controlling up
to 16 indoor units

45. V Controllers & BMS Touch Screen Central Controller
Touch Screen Central Controller can control up to 128 indoor units
IGU05
Protocol Translator
Max.64 indoor units under one IGU05(one modular or combination outdoor system)
No.1
V/1/50-60Hz
No.1
No..2
No..64
RS-485 max. 1000m ～
No..2
Max. 32 units of IGU05
YCZ-A003
Touch Screen Central Controller
No..32
Note: (number of IGU05) x (number of indoor units under each IGU05)
should be no more than 128

46. V Controllers & BMS Central Controller With Monitor Software
Central Controller With Monitor Software can control up to 400 indoor units
Monitor Software
IGU02
Protocol Translator
Max.40 indoor units under one IGU02(one modular or combination outdoor system)
No.1
Ammeter
No.1
No..2
No..40
RS-485 max. 1000m
RS-232 or USB
No..2
Ammeter
Max. 32 units of IGU02
HCM-01
Central Controller With Monitor Software
No..32
Ammeter
Note: (number of IGU02) x (number of indoor units under each IGU02)
should be no more than 400

47. V Controllers & BMS LonWorks
LonWorks Converter can control up to 32 indoor units
JCI
Metasys
IGU06
Protocol Translator
Max.32 indoor units under one IGU06(one modular or combination outdoor system)
JCI Net Control Engine
TCP/IP
No.1
No..2
No..32
RS-485 max. 1000m
Note:
1. One LonWorks IG07 Converter can Only work with ONE
Protocol Translator IGU06
2. Please use LonTalk Card U10(75010R) to commissioning
NCE & IGU07
3. Please buy U10(75010R) locally from Echelon, suggest
One branch office getting one Card
LonWorks
U10(75010R) LonTalk Card
IGU07 LonWorks Converter

48. V Controllers & BMS BacNet/IP
JCI
Metasys
BaNet/IP Converter can control up to 72 indoor units
IGU02
Protocol Translator
Max.40 indoor units under one IGU02(one modular or combination outdoor system)
JCI Net Control Engine
TCP/IP
No.1
Ammeter
No.1
No..2
No..40
RS-485 max. 1000m for each group
BacNet/IP
No..2
Ammeter
Max. 20 units of IGU02
. Under NCE25 series is 72 indoors, and one NCE2560 control two HCM-03, NCE2560 can control up to 2000 points, one indoor is 12 points.
. Under NCE55 series is 250 indoors
. The capacity is both limited to NCEs capacity and HCM-03 structure
No..20
Ammeter
HCM-03 BacNet/IP Converter
Note: (number of IGU02) x (number of indoor units under each IGU02)
should be no more than 72