Download presentation
Presentation is loading. Please wait.
Published byHenry Brown Modified over 6 years ago
1
Date of download: 10/3/2017 Copyright © ASME. All rights reserved. From: Thermal Performance of Nanofluid Charged Heat Pipe With Phase Change Material for Electronics Cooling J. Electron. Packag. 2015;137(2): doi: / Figure Legend: Temperature growth in charge process for different ESM (a) water, (b) PCM (paraffin), and (c) without ESM
2
Date of download: 10/3/2017 Copyright © ASME. All rights reserved. From: Thermal Performance of Nanofluid Charged Heat Pipe With Phase Change Material for Electronics Cooling J. Electron. Packag. 2015;137(2): doi: / Figure Legend: Schematic of thermal resistance–capacitor model for the heat pipe-PCM module
3
Date of download: 10/3/2017 Copyright © ASME. All rights reserved. From: Thermal Performance of Nanofluid Charged Heat Pipe With Phase Change Material for Electronics Cooling J. Electron. Packag. 2015;137(2): doi: / Figure Legend: Comparison of experimental and simulation values of temperature growth in PCM in charge process
4
Date of download: 10/3/2017 Copyright © ASME. All rights reserved. From: Thermal Performance of Nanofluid Charged Heat Pipe With Phase Change Material for Electronics Cooling J. Electron. Packag. 2015;137(2): doi: / Figure Legend: (a) Schematic diagram of heat pipe cooling module test facility and thermocouple location. (b) Photograph of heat pipe cooling module.
5
Date of download: 10/3/2017 Copyright © ASME. All rights reserved. From: Thermal Performance of Nanofluid Charged Heat Pipe With Phase Change Material for Electronics Cooling J. Electron. Packag. 2015;137(2): doi: / Figure Legend: (a) SEM image at magnification of 20,000× of MWCNT particles and (b) photograph of functionalized MCNT–water nanofluid
6
Date of download: 10/3/2017 Copyright © ASME. All rights reserved. From: Thermal Performance of Nanofluid Charged Heat Pipe With Phase Change Material for Electronics Cooling J. Electron. Packag. 2015;137(2): doi: / Figure Legend: Comparison between efficiency curves at different cooling mass flow rate
7
Date of download: 10/3/2017 Copyright © ASME. All rights reserved. From: Thermal Performance of Nanofluid Charged Heat Pipe With Phase Change Material for Electronics Cooling J. Electron. Packag. 2015;137(2): doi: / Figure Legend: Temperature growth in different ESM for simultaneous charge and discharge process for different heating power: (a) 10 W and (b) 30 W
Similar presentations
© 2024 SlidePlayer.com Inc.
All rights reserved.