1. Early Commercial Uses of the Forest

2. The Agrarian Economy

3. Percentage of Farmers in the U.S. Workforce

4. From a Feudal to a Free Society

5. Abandoned Indian Fields and Clearings Were Settled First

6. The major difference between European settlement and Indian settlement was the European concept of land ownership - permanence The major difference between European settlement and Indian settlement was the European concept of land ownership - permanence

7. U.S. Population: 1790 - 1860

8. Forested Acres in the U.S.

9. U.S. Population: 1790 - 2010

10. The Lumber Industry The first sawmill in America was reportedly established between 1623 and 1633 in what is now Maine. The first sawmill in America was reportedly established between 1623 and 1633 in what is now Maine. Like many early industries, lumbering as a recognizable industry was established first and was strongest in New England Like many early industries, lumbering as a recognizable industry was established first and was strongest in New England

11. Sawn Products Sawmills appeared in America before they did in England. Sawmills appeared in America before they did in England. Sawmills spread everywhere throughout the colonies by the time of the American Revolution. But Maine was the focal point of the growing industry. Sawmills spread everywhere throughout the colonies by the time of the American Revolution. But Maine was the focal point of the growing industry. The products they provided were consumed in domestic and export markets The products they provided were consumed in domestic and export markets Old Sturbridge Village, MA

12. The Timber Trade Began about 1640 (Great Migration: 1630-1640) Began about 1640 (Great Migration: 1630-1640) Ports: Falmouth, Portsmouth, Salem, Marblehead, Boston, Fall River, Providence, New London, New Haven (all in New England) Ports: Falmouth, Portsmouth, Salem, Marblehead, Boston, Fall River, Providence, New London, New Haven (all in New England) Trading Partners: Britain, the West Indies, Spain, Portugal, the Wine Islands of the Azores, Madeira and the Canaries. Trading Partners: Britain, the West Indies, Spain, Portugal, the Wine Islands of the Azores, Madeira and the Canaries.

13. The Timber Trade White oak barrel and pipestaves were shipped to the Wine Islands of the Azores White oak barrel and pipestaves were shipped to the Wine Islands of the Azores White oak staves for rum casks and red oak staves for sugar and molasses barrels and hogsheads were sent to the West Indies White oak staves for rum casks and red oak staves for sugar and molasses barrels and hogsheads were sent to the West Indies “Only premium- quality timber products were exported” due to the economics of transport (Williams, p. 101). “Only premium- quality timber products were exported” due to the economics of transport (Williams, p. 101). Masts, potash, and naval stores were shipped to Britain Masts, potash, and naval stores were shipped to Britain

14. The Timber Trade As the timber of the Indies was depleted in the mid-17th century, exports of planks, boards, clapboards, and shingles from New England became common As the timber of the Indies was depleted in the mid-17th century, exports of planks, boards, clapboards, and shingles from New England became common

15. The Timber Trade Return journeys brought back molasses, rum and cotton from the West Indies, wine from the Mediterranean, and slaves from Africa. Return journeys brought back molasses, rum and cotton from the West Indies, wine from the Mediterranean, and slaves from Africa. Cargoes also included tropical timber such as mahogany. Cargoes also included tropical timber such as mahogany.

16. “With the flour or grist mill, the sawmill was the first local industry established in the subsistence economies of the newly settled areas. As new ground was cleared, some of the timber (usually pine) was sent to the mill to be made into clapboards, flooring planks, beams, and other house and general constructional materials.” Michael Williams, Americans and Their Forests (p. 95)

17. 1850 Census of Manufacturing 1. Flour & Grist (14%) 2. Lumber (5.9%) 3. Cotton Goods (4.8%) 4. Clothing (4.8%) 5. Woolen Goods (4.8%) 6. Leather (4.4%) 7. Liquor (2.7%) 8. Slaughtering & meat packing (1.0%) 9. Agricultural implements (0.8%) 10. Paper & pulp (0.3%)

18. Improvements in Sawing Technology Water-powered mills Water-powered mills Developed ca. 1620 Developed ca. 1620 Early mills were powered by water in an up-and-down motion Early mills were powered by water in an up-and-down motion Blades were stationary Blades were stationary Logs were either pushed or mechanically ratcheted into the blade Logs were either pushed or mechanically ratcheted into the blade Crude but a vast improvement over the pit saw Crude but a vast improvement over the pit saw

19. Improvements in Sawing Technology: Water-powered single blade sawmill “The saw was attached to one end of a wood beam that joined a crank on a water wheel. The log moved on a cogwheel- driven carriage (an American invention) against the saw. The wheels and the cogs were of wood, preferably hickory.” (Youngquist and Fleischer, p. 23) Old Sturbridge Village, MA

20. Improvements in Sawing Technology: Water-powered single sash sawmill Saw blade mounted in a wood frame Saw blade mounted in a wood frame Developed about the same time as the single-blade mill Developed about the same time as the single-blade mill Sawed 2,000- 3,000 lineal feet per day Sawed 2,000- 3,000 lineal feet per day Old Sturbridge Village, MA

21. Improvements in Sawing Technology: Water-powered “muley” sawmill Adaptation of the single- blade sawmill Adaptation of the single- blade sawmill Long-bladed, frameless saw Long-bladed, frameless saw Developed ca. 1780 (Williams, p. 167) Developed ca. 1780 (Williams, p. 167) Sawed 5,000-8,000 l.f. per day Sawed 5,000-8,000 l.f. per day Old Sturbridge Village, MA

22. Improvements in Sawing Technology: Water-powered circular sawmill Invented in 1813 by Tabitha Babbitt in the Shaker community of Harvard, Massachusetts Invented in 1813 by Tabitha Babbitt in the Shaker community of Harvard, Massachusetts Babbitt also invented one of the first cut nail-making machines Babbitt also invented one of the first cut nail-making machines Replaces reciprocal motion with rotary motion Replaces reciprocal motion with rotary motion Sawed 500-1,200 l.f. per day Sawed 500-1,200 l.f. per day

23. Productivity of Sawmills Water-powered Sawmills

24. Williams, Americans and Their Forests, Plate 6-1, Page 171

25. Williams, Americans and Their Forests, Plate 6-2, Page 171

26. Williams, Americans and Their Forests, Plate 6-3, Page 172

27. Williams, Americans and Their Forests, Plate 6-4, Page 172

28. Potash Made from the ashes of logs burned in the open Made from the ashes of logs burned in the open A byproduct of land clearing A byproduct of land clearing Ashes were sold to asheries make potash Ashes were sold to asheries make potash Potash was a ready source of cash for farmers, allowing them to purchase goods they could not readily produce on their own Potash was a ready source of cash for farmers, allowing them to purchase goods they could not readily produce on their own

29. Potash – The Ashery Ashes leached in a kiln by pouring boiling water over them Ashes leached in a kiln by pouring boiling water over them Repeated boiling and leaching produced a whiter, purer “pearlash” Repeated boiling and leaching produced a whiter, purer “pearlash” The liquid product was lye The liquid product was lye

30. Potash – The Ashery “Lye was an alkali that was essential in the manufacture of soap and also for glass making, tanning, bleaching, cleaning greasy wool, calico printing, saltpeter for gunpowder, medicines, and a number of other chemical operations in which potassium carbonate compounds were needed.” Michael Williams, Americans and Their Forests

31. Ironmaking “For 150 years wood was the key energy source of the country…. Therefore, wood was the source of charcoal, which made the smelting of iron and the reduction of other metals possible.” (Williams, p. 104)

32. Ironmaking Estimated 1-6 acres of hardwood forest per day was consumed to make charcoal for an iron furnace Estimated 1-6 acres of hardwood forest per day was consumed to make charcoal for an iron furnace Williams (p. 106) estimates that 150 acres were consumed for every ton of pig iron produced Williams (p. 106) estimates that 150 acres were consumed for every ton of pig iron produced

33. Ironmaking Only 11 of 173 iron furnaces in England were using charcoal as fuel in 1806 Only 11 of 173 iron furnaces in England were using charcoal as fuel in 1806 In contrast, 439 of 560 American furnaces burned charcoal as late as 1856 In contrast, 439 of 560 American furnaces burned charcoal as late as 1856

34. Transportation The covered bridge was developed to protect the bridge deck from the elements The covered bridge was developed to protect the bridge deck from the elements