1. How To Install a Centrifugal Water Pump

2. Installation Process First of all, consult the manual book to determine the right process of installation

3. Make Base Plate Inspection

4. Check the Pump Impeller, it can be turned by hand

5. If it cannot be turned, open the pump casing to look for obstructions

6. Turn the shaft clockwise by using a deep socket wrench on the Impeller nut

7. Open all the body parts of centrifugal pumps and clean them properly

8. Clean out any corrosion build up on the impeller Clean out any corrosion build up on the impeller

9. If necessary, coat the underside of the base plate to prevent the rust

10. Pump Installation Place Locate the pump near to the water source

11. Adequate Space For Operation, Inspection And Maintenance

12. Base Plate Pumps Foundation Grouted on a concrete foundation, which has been poured on a solid footing

13. Ensure Solid Foundation So that it will be able to absorb any vibration Able to provide a rigid and permanent support for the pumping Unit Use good quality suction hose that will not be collapsed by suction So that it will be able to absorb any vibration Able to provide a rigid and permanent support for the pumping Unit Use good quality suction hose that will not be collapsed by suction

14. Check all fittings and connections in the suction line for tightness

15. Tools Required For Installation Hammer Worm gear saw with diamond blade Rebar cutters Concrete mixer Concrete vibrator Lifting device Hand tools Chipping hammer Pressure washer Epoxy adhesive Rebar tie wire

16. Correct Installation and Maintenance of a Centrifugal Pump Ensure Trouble Free Service

17. Visit www.pumpkart.com to buy Pumps online and take guidance on their installation and Maintenancewww.pumpkart.com