1. BETHS PENCIL BOX

2. This is a pictures of my 250 mm piece of wood This is my piece of wood cut half way and I am about to chisel it!

3. This is me when I was using the routing machine and this is what it turned out like!!!

5. This is my box finished all it needs now is a coat of vanish Here it is varnished

6. THESE ARE THE TOOLS I USED

7. This is the marking gauge I used to mark where I wanted to chisel up to.

8. This is the saw that I used to cut with.

9. These are the goggles I used to protect my eyes.

10. These are the ear muffs I used to protect my ear drums.

11. These are the clamps I used so that my box would glue together.

12. This is the mallet I used to chisel with.

13. This is the putty I used to fill the holes with.

14. This is the varnish I used to make my box shiny

15. This is the pyro pen I used to burn patterns on my box

16. THE HAMMER AND NAILS I USED

17. This is the sand paper I used to make my box smooth.

18. This is the chisel I used.

19. This is the disc sander I used to make my box smooth and to round off the edges.

20. This is the plane I use to cut of edges.

21. This is the nail punch I used so the nails didn’t stick out.

22. BY BETH PRATT