1. Chapter 5 Server Installation NT Server Requirements NT Server File Systems Installation

2. NT Server Requirements 32-bit bus computer with an 80486 25 MHz or better processor VGA or better solution monitor High density 3.5 -inch floppy disk CD-ROM drive 16 MB or more memory One or more hard disk with 148 MB Network interface card

3. NT Server File Systems - I Security: Backup, trust and privilege, etc, File compression File size: 64 GB File activity information: log or journal File recognition –NTFS –FAT

4. NT Server File Systems - II Server domain –One network with many domain –One or more server in the same domain or different one Server types –Primary domain controller (with security accounts database) –Backup domain controller (two or more servers) –Standalone server (database)

5. NT Server File Systems - III Emergency repair disk –drivers –NTFS file system –NT server operating system

6. Installation Preparation Task - I List of hardware components Hardware configuration information (BIOS) NT server system requirement What partition to use (C or D) File system Name of NT directory Name of the server

7. Installation Preparation Task - II Password for administrator account (less 14 characters) Type of server Protocol selection - NetBEUI Name for the domain Emergency repair disk

8. Installation - I Boot computer with Setup disk 1 in drive A Put Setup disk 2 in drive A as requested enter Enter Put Setup disk 3 in drive A as requested Enter

9. Installation - II Enter Insert Windows NT Server CD_ROM Enter F8 No Changes: The above list matches mu computer Enter

10. Installation - III Enter Convert the partition to NTFS Enter Accept default Enter Exhaustive examination Enter

11. Installation - IV Remove CD_ROM and floppy disk Enter (computer reboot by itself) Load CD_ROM OK Next (Follow the Setup Wizard)

12. Installation - Licensing Name: your full name Organization: CSUS Next Registration Next 5 per server (Licensing Modes, leave per seat unchecked) Next

13. Installation - Server Name & Type Computer name: CSUSMIS Next Type: Primary Domain Controller Next

14. Installation - Administrator Administrator account: less than 14 characters for password Next Emergency repair disk: yes Next

15. Installation - Software Default Next

16. Installation - Windows NT Setup Next

17. Installation - Networking Wired to the network Next Do not check the option to install Microsoft’s Internet Information Server software Next

18. Installation - NIC Start search Next NetBEUI protocol (leave other unchecked) Next

19. Installation - Network Services NetBIOS interface Workstation Server Next

20. Installation - Network Components Next Continue Next

21. Installation - Network Communications Next Type CSUSMIS for computer name Type MIS_DATA_COM for domain name Next

22. Installation - Configuring NT Server - I Finish Data & Time tab Enter current date & time Time Zone tab Select proper time zone using scroll box Close OK

23. Installation - Configuring NT Server - I Insert a blank disk in drive A OK Remove the newly created Emergency Repair Disk Restart computer

24. Packbell Hardware IDE CD-ROM (ATAPI 1.2) IDE Controller Hard disk: ST3660A –No of cylinder: 1057 –No of head: 16 –No of sector: 63 –Size: 520MB RAM: 640 and 16MB