1. LTI 03: Joint Rolled off catwalk 12/Feb/01 One end of a casing joint fell between two sections of pipe rack support, hit a floorman and badly injured his foot. Front section of support had been moved leaving a gap.

2. LTI 03: Joint Rolled off catwalk 12/Feb/01 Rolling of the casing joint was not done properly. Joint was not rolled square on the pipe rack and so it dropped through the gap

3. LTI 03: Joint Rolled off catwalk 12/Feb/01 Front part was moved to level pipe rack and make easier to lift onto cat walk Only part of the support was moved leaving a gap between the two pieces

4. LTI 03: Joint Rolled off catwalk 12/Feb/01 What went wrong? How do we put it right? What went wrong? * Joint was not rolled square on pipe rack. * Men did not pay attention to their work. * Set-up of pipe rack not acceptable. Support was wrongly placed. * Supervisor did not monitor work enough. How do we put it right? * Plan the work, work the plan. * Pay attention to the work. * Toolbox Talk - before starting work make sure job is understood by everyone. * Improve supervision.