1. IV&V Facility Research and Development of Deployable IV&V Methods for FPGA Applications Northrop Grumman, KeyLogic Systems, Mountain State Information Systems, Inc., The University of Montana and West Virginia University July 20, 2006

2. IV&V Facility Project Need What are the methods/procedures/standards for analysis of FPGAs? –Provide field proven Work Instruction to the IV&V Practitioner Establish IV&V’s role in the analysis of FPGAs –Develop an overall IV&V strategy and position –Address static and dynamic needs/methods across full life-cycle FPGAs are playing increasingly prominent roles in NASA missions –They are partially hardware and partially software –They are attractive because they do not have the month(s) lag time associated with manufacturing custom chips but provide many of the same features FPGA IV&V methods are accurately documented and communicated High speed software functions are evolving to FPGAs in NASA missions. IV&V of these devices is important to the agency to maximize mission success. High speed software functions are evolving to FPGAs in NASA missions. IV&V of these devices is important to the agency to maximize mission success.

3. IV&V Facility What are challenges in FPGA IV&V? Effective FPGA IV&V addresses both the abstract representation and the physical implementation Effective FPGA IV&V addresses both the abstract representation and the physical implementation Design Method (abstract representation) Implementation (Physical Representation) Typical Speed of Operation SOFTWARECOMPUTER 10’s Hz FIRMWAREMICROPROCESSOR MICROCODESEQUENCER DIGITAL DESIGNCHIPS/DIGITAL CIRCUITS RF DESIGNRADIOS/RF CIRCUITS ANALOGTRANSISTORSContinuous MHz GHz KHz Some challenges here different than FSW: Timing, Loading, Integrated package (circuit/software) --  requires dynamic IV&V analysis methods FPGAs straddle: Abstract representations like SW (HDL) Physical implementations like Digital Design

4. IV&V Facility Approach This is a “standard initiative” with 5 steps: 1. Surveying and cataloging existing FPGA applications 2. Concept/Requirements Phase: –Methods for Concept/Requirements analysis –Identify potential methods for full-lifecycle analysis 3. Design/Implementation Phase: –Dynamic analysis including functional and timing simulations at the unit level –Envisioned work instructions build on successful MRO analysis methods 4. Test Phase: –Define the types of design and implementation validation that can be practically accomplished via subsystem testing 5. Project transference: Continue with pilot and other projects Steps 1-4 occur in Year 1, and Step 5 in Year 2