1. Bell Ringer (2nd, 4th period)
Name the following lab equipment and tell me its function.
Have: Signed Syllabus, Photo Release, and Safety Contract on Desk

2. Hazard symbols How many can you name?
BIOHAZARD
RADIOACTIVE
CORROSIVE
IRRITANT/HARMFUL
FLAMMABLE
EXPLOSIVE
HIGH VOLTAGE
TOXIC/POISON
OXIDIZING
ENVIRONMENTAL HAZARD

3. NFPA CHEMICAL HAZARD LABEL
FLAMMABILITY
HEALTH
REACTIVITY
(STABILITY)
SPECIAL

4. NFPA CHEMICAL HAZARD LABEL
Least
Serious 4
Most 4 2 3 4
Flammable vapor which burns readily
Substance is stable

5. NFPA CHEMICAL HAZARD LABEL
Complete Label for Phosphine

6. MSDS (Material Safety Data Sheet)
On file for all purchased chemicals
Available online at
Includes all information shown on a chemical label and more

8. Describe this chemical based on the information provided.
NFPA diamond 3 1 OX
Hazard Rating
Severe
Serious
Dangerous
Minor
0 Slight
Other special hazards:
SA = simple asphyxiant
= reacts with water

9. Bell Ringer (3rd, 4th,5th, 6th period)
Draw a NFPA safety diamond for the substance given the following information:
Reactivity – 0, Health – 1, Flammability – 3
Describe the chemical based on this information.
Describe what safety precautions should be taken for a chemical with the following MSDS info:
Have: Signed Syllabus, Photo Release, and Safety Contract on Desk
Potential Health Hazards
Fire Fighting Measures
Slightly toxic by ingestion and skin absorption. Irritating to body tissues. Causes severe eye burns.
Avoid all body tissue contact.
Noncombustible liquid

10. Learning the Lab Equipment

11. desiccator
triple beam balance    
policeman
Glass stirring rod
Watch glass
Utility clamp

12. Beaker tongs
Safety goggles
Crucible tongs
apron
Stirrer/hot plate

13. Digital balance
Graduated cylinder
beaker

14. Test tube cleaner
Test tube rack
Test tube
Wash bottle
Test tube clamp
Mortar and pestle

15. Forceps (tweezers)
Florence flask
Erlenmeyer flask
scoopula
Volumetric flask

16. Clay triangle
Wire mesh
Ring stand
Buret clamp
ring

17. Bunsen burner and striker
pipettes
crucible
Crucible tongs

18. Procedure for properly using a Bunsen burner:
1) CAUTION : Make SURE all gas valves are closed, before turning on the main gas. 2) Put safety goggles on 3) Obtain a lab burner 4) Connect rubber hose to the lab burner and gas valve, checking for holes or cracks in the rubber 5) Obtain sparker 6) Turn the gas valve on 7) Hold sparker over the top of the burner, and squeeze the handle producing sparks until the flame is lit 8) Adjust the flame's heat, by turning the air valve on the burner tube

19. And this is an example of a poorly adjusted burner flame
This is an example of a well-adjusted burner flame

20. Lab Equipment & Safety
Lab

21. Exit Ticket “Learning the Lab Equipment” Lab
On the sticky note, write EITHER:
One thing you learned in class today
One thing you’re still unsure about
Place sticky note in the appropriate space on the door