1. Flex v5.3 Release Presentation June 2008

2. CONFIDENTIAL2 Release v5.3 – April 2008 Notable Features Manage master PCB with multiple assembly variations One assembly allows global changes to effect all variations Assembly Variants Configure up to 20 charts for continuous process tracking ProcessTracker SPC on Machine Improve speed by reducing fixed image acquisition time Acquire while inspecting Optimized motion control, with improved ease of configuration Motion Control Configuration Provides better model integrity by removing rotational variation from model Auto Align Improvements

3. CONFIDENTIAL3 Ease of Use: Assembly Variant Master PCB with multiple assembly variations –Component omissions –Different component values –Different FPGA part number Manage variation within one assembly to allow global changes to effect all variations PCB Assembly Variation A U1 R1 C1 Variation B U1 U2 R1 C1 C2 Variation C U2 R1 C2

4. CONFIDENTIAL Maximize Line Yield: Process Tracker SE 300 Ultra Flex Post Placement Printer Flex Post Reflow Component Placement Reflow Rework And Test Production Line 1 Process Tracker™ Short-term reporting Process variable trending Failure count flagging Real-time yields Alarming Real-time Process Monitoring CONFIDENTIAL 4

5. CONFIDENTIAL5 High Speed at High Performance: Motion Control Configuration Microlynx firmware redesign –Removes some fixed motion time –Greater flexibility Configure from UI –Customize motion control in the field

6. CONFIDENTIAL6 Inspection Performance: Model Auto-Alignment Current method cannot correct gross rotational errors. Additional symmetry & reflection capability Old Way

7. CONFIDENTIAL7 Release v5.3 – April 2008 Other Important Features Defect Review Enhancements Add part number to defect review screen Auto-loading functionality returns LIFO review Toggle between location and feature level review Enable/Disable false fail at defect review Specify at task level if an operator is allowed to false fail a system defect. Ensure review of component Traceability Enhancements Add barcode, lot code information to defect XML When reviewing feature level defects, location level XML data will also be categorized Multiple System XML files Event logging for both RS232/CSV Laser-etched (light on dark) barcode decoded by software Increase number of stored defect image patches Retain more defect history for PI reporting Danish OUINew SMEMA specification compliance NG signal is now defined Bug Fixes Gross Agree defect review sets all failures as passed False bad board signal on inspection retry (stitcher failure)

8. Thank You