1. Inventor Introductory Training Adaptivity 101

2. What This Exercise Covers Starting a part model in a completely empty assembly file Creating a second part model which is adaptively sized and positioned relative to the first part you created Turning adaptivity off on one part and on on another part

3. How Long Will We Work? About 20 Minutes...

4. Open a New Assembly

5. Key Concept You can just as easily start a brand new design in an empty assembly file as you can in an empty part file.

6. Create the First Part With nothing selected in your assembly file, right- click the mouse to open the context menu. From the context menu select Create Component

7. Name Your New Part On the Create In-Place dialog enter the name pin for your new part. Expand the dialog using the “>>” button on the lower right Make sure that your part will be stored someplace you can find it later Use an English template

8. Sketch A Circle

9. Extrude The Circle

10. Create A New Sketch Select the Sketch button Select the face of the cylinder you just extruded Create another circle smaller than the first using the same center point

11. Extrude Your New Sketch Your part should look similar to this.

12. Return to the Assembly Your browser should look similar to this image. With nothing selected in your part model, right-click and select Finish Edit on the context menu - or - double- click on the top-most node in the assembly browser.

13. Create the Second Part Using the same steps we used before… With nothing selected in your assembly file, right- click the mouse to open the context menu. From the context menu select Create Component

14. Name The Second Part On the Create In-Place dialog enter the name bushing for your new part. Expand the dialog using the “>>” button on the lower right Note that the directory is the same directory you previously selected. Use an English template

15. Use the Create Mate Option

16. Pick the Face Shown

17. Key Concept When you create parts in-place, you have the option of sketching on the face of parts that already exist within the assembly. The sketch plane that you create can also be optionally mated to the face of the part you selected to sketch on. This can later save you steps in constraining your assembly.

18. Use “Look At” to Re-Orient Once in the sketch environment, use the “Look At” command to re- orient your view so you are looking normal to the planar face you selected.

19. Sketch 2 More Circles Off to the side as shown, sketch two concentric circles.

20. Apply a Dimension Place a dimension between the inside and outside diameters.

21. Extrude the Bushing

22. Make the Feature Adaptive In the browser, select Extrusion1 From the context menu, select Adaptive

23. Return to the Assembly With nothing selected in your part model, right-click and select Finish Edit on the context menu - or - double- click on the top-most node in the assembly browser.

24. Make the Bushing Part Adaptive From the assembly browser, select the newly created bushing.ipt With the part selected, open its context menu by right- mouse clicking Select Adaptive

25. Key Concept Adaptivity has two levels of control. The first level is applied to the individual features of each part. The second level of control is applied to the part in the assembly. Think of this control in the same way as the water faucets in your house are controlled - the feature- level control is like the on/off valve at each faucet, the part-level control is like your main water valve at the street - if this main valve is shut off, none of your faucets will provide you with water. For adaptivity to work, a feature must be adaptive and the part must be adaptive.

26. Place A Mate Constraint Select the faces shown To adapt the inside diameter of the bushing to the outside diameter of the pin and to position the diameters concentrically you must select the faces (and not the axes). NOTE - Part colors were changed to aid in differentiation.

27. Size and Position Adapt!

28. Place A Flush Mate Constraint

29. The Length Adapts

30. Key Concept Any aspect of your model’s sketched features which are not constrained by dimensions can adapt in the assembly to fit the fixed size and position of other parts.

31. Switching Adaptivity Select bushing.ipt in the browser and turn adaptivity off using the check mark in the context menu

32. Switching Adaptivity In-place activate bushing.ipt by double-clicking on it in the browser - or - by selecting it in the browser and selecting Edit from the context menu

33. Switching Adaptivity Select Extrusion1 in the browser and either expand the feature to select the sketch to edit - or - with the feature selected, select Edit Sketch from the context menu

34. Switching Adaptivity Add a dimension to the inside diameter of your bushing sketch Note the value applied by the system equals the outside diameter of the pin shank since this was the diameter the bushing adapted to Edit the dimension so that the diameter is smaller Update the part

35. Return to the Assembly Upon returning to the assembly, the system displays the above error recovery dialog because the diameter of the bushing and pin can no longer be mated “Accept” the problem (because we are going to fix it now)

36. Switching Adaptivity In-Place activate pin.ipt Accept the Error Recovery warning again Select Extrusion2 in the feature browser Make Extrusion2 adaptive using the context menu switch Return to the assembly Make pin.ipt adaptive using the context menu switch

37. Switching Adaptivity Notice that the pin shank now adapts to the inside of the bushing (shown above following suppression of the mate/flush, dragging the bushing a little and changing its color to Glass).

38. Summary Adaptivity can be controlled at both the part and the feature level An adaptive part must have adaptive features in order to adapt in an assembly A part which adapted can be “locked” by turning off the part-level adaptivity and another part which previously drove the adaptivity can be made adaptive - adaptivity is non-directional