1. How to connect two wires… Using a solder-type heat shrink connector

2. By the end of this lesson you will… Be able to connect two wires successfully, forming a positive electrical connection, using a solder-type heat shrink electrical connector.

3. The Materials… One solder-type connector, two wires needing connection

4. The Tools… Wire Strippers and a hand-held butane torch

5. The Procedure… Insert wire in stripper, ½” from end

6. The Procedure… Strip off ½” of insulation on each wire

7. The Procedure… Overlap bare wires inside splicer within solder

8. The Procedure… Surround splicer with torch sleeve and heat

9. The Final product… Solder melts around wire and heat shrink seals

10. The Final product… A happy student!