1. PowerLogic PowerView v2.0 software1

2. PowerLogic PowerView v2.0
New native support for devices
Software updates
New PDI tool (PMC usage)
Target availability is October 2008.

3. Supported Devices The list of Supported Devices are: Power Meter 210
M22, M2222 and M26 extended I/O modules
Enercept
ION 6200
Micrologic Trip Units Types P, H and A
Maximum number of Devices:
The maximum number of devices for this software application is 32.

4. Device Communications to devices
Device Connections
Automatic Detection (Auto discovery of networked devices)
Software polls the network for supported devices
User may “speed up” the detection process with scan options
Devices are automatically named but can be re-configured by user
Manual connections
End users will have the option to manually add and delete device connections.
Supports Ethernet gateways, including EGX models and PM8ECC
Communications
Devices with communication issues are highlighted in red

5. Auto Detection of Devices

6. Selective Scan Option

7. Data Logging Onboard Data Logging: PC-based Data Logging:
The Power Meter 800 (PM800) family will perform onboard data logging
The PM800 onboard logging interval is set in PMCU. PowerView Software will upload at regular 2 hour intervals automatically.
PC-based Data Logging:
The Power Meter 210, Power Meter 710 & 750, and Micrologic Trip Units A, P and H will perform PC-based data logging.
The PC-based data logging interval default is 15 minutes.
The PC-based data logging interval can be changed by the end user.
The measurements that are PC based data logged cannot be modified.
Quantities (measurements) Logged:
Current
Voltage
Power
power factor
energy,
demand power
demand current
total harmonic distortion (THD).

8. Database Management Database Backups: Database Restores:
The option to backup the database will be available.
Database Restores:
The option to restore the database will be available.
Historical Database Management:
The Historical database will be maintained below 2.9 GB in size.
Data will be deleted from the Historical database as first in – first out (FIFO) to prevent growth over 2.9GB.
Deleted Historical data is not retained.

9. Real Time Display – Summary View

10. Report Builder Basic Queries: Pre-configured Queries: Reports Viewer:
Device(s) + Measurement(s)+ time range= Output (trends, charts, tables)
Both PC and Onboard (PM8’s) data available in database.
Pre-configured Queries:
Focused on providing end user with historical information on their Electrical Energy usage and power demand.
Energy usage for last day, week, month
Energy TOU (Time of Use) or Energy Bands outputs
Support for Time of Use Metering includes.
defining up to 3 schedules
Each Schedule can contain
-> up to 10 periods (bands) for energy accumulation
-> Supports weekends, special days, holidays
Reports Viewer:
End user will be expected to have Microsoft Excel to view reports.
All costing and other calculations (eg. Terrifications, rates) can be done manually by the customer in Excel.

11. General Report Example

12. Report Builder

13. Export the Data

14. Time of Use Setup

15. Time of Use Setup

16. Time of Use Setup

17. Time of Use Setup

18. Time of Use Setup

19. Appendix A – Data Logging per Device

20. > Questions ?