Presentation is loading. Please wait.

Presentation is loading. Please wait.

Fall 2009 Module 8 Inverters. Converts the DC power produced by the solar modules into AC power used on the utility grid.

Similar presentations


Presentation on theme: "Fall 2009 Module 8 Inverters. Converts the DC power produced by the solar modules into AC power used on the utility grid."— Presentation transcript:

1 Fall 2009 Module 8 Inverters

2 Converts the DC power produced by the solar modules into AC power used on the utility grid

3 History Inverters have been the weaker link in PV systems Early inverters were unreliable Early inverters were inefficient which penalized an entire system

4 Inverter Types Square Wave Modified square wave Sine wave

5 Square wave Step-function or “square” alternating current output –Considerable harmonic distortion For small resistive heating loads

6 Modified Square Wave Complex circuits used to switch DC into AC. More appropriate for operating a wide variety of appliances Still noise will be picked up by sensitive equipment

7 Sine Wave High quality wave form Most common inverters today Little harmonic distortion

8 The wave…comparison

9 Inverter manufacturers SMA (Sunny Boy) Fronius Xantrex Outback PV Powered Kaco Enphase – Micro Inverters

10 The Guts

11 Some examples

12 Enphase Micro-Inverter

13 All Installed

14 Installing SMA

15 Optional Inverter Features Remote control operation and data- monitoring Load transfer switch-allows system to meet critical loads during power failure Series and Parallel connectivity for multiple inverters Individual module performance monitoring

16 Ideal Inverter Features – now standard Maximum power point tracking (MPPT) Low harmonic distortion Near perfect Sine wave shape Ground Fault Protection AC/DC disconnects Weatherproof enclosure

17 Specifying an inverter Grid Tied:Watts Output AC-computed STC rated watts of PV panels Stand-Alone: based on peak load Input Voltage-usually between 75 and 480 VDC, called the window or range –Insure that the voltage will not drop or exceed this range because of climatic conditions or inverter will not function Output Voltage:120, 240, 208, 480 Frequency: U.S. is 60Hz

18 Specifying an inverter Grid Tied:Watts Output AC-computed STC rated watts of PV panels Stand-Alone: based on peak load Input Voltage-usually between 75 and 480 VDC, called the window or range –Insure that the voltage will not drop or exceed this range because of climatic conditions or inverter will not function Output Voltage:120, 240, 208, 480 Frequency: U.S. is 60Hz

19 Grid Tied Inverter Sizing Sized based on the amount of watts we pass through the system at any one time – Size of inverter is the labeled watts an SMA 3000 is a 3000 watt inverter –The most power that will pass through this inverter is 3000 watts –If the output is 240 volts, the current will be 12.5 amps »3000W ÷ 240v = 12.5 amps

20 String Sizing Software

21 And sized by… PV system component package (grid tied) The Grid Tied PV system will be based on other factors –Budget –Roof Size –Rebate/Tax incentives


Download ppt "Fall 2009 Module 8 Inverters. Converts the DC power produced by the solar modules into AC power used on the utility grid."

Similar presentations


Ads by Google