1. MAIS PLASTIC Conducted By: Green Line Company

2. Power Factor Readings: Load Percentage: Predicting the Energy savings Before Installing Powerboss Formula: Ave kW / Ave Kvar (100) = Saving Factor Power Readings: Injection Molding (41kW Motor) Off Load: 71.43% Off Load: 2.121 / 15.595 (100) = 13.60 Mid Load: 14.29% Mid Load: 7.750 / 16.214 (100) = 47.80 Full Load: 14.28% Full Load: 18.361 / 18.548 (100) = 98.99

3. Power Savings

4. Consumption & Savings 0.407kWh per 5mins. 4.884kWh per Hour 117.216kWh per Day 703.296kWh per Week Power Consumption kW: Power Saving kW: 26.42% 9290.54kWh per Year 1.334Kvarh per 5mins. 16.008Kvarh per Hour 384.192Kvarh per Day 2305.152Kvarh per Week Power Consumption Kvar: 35164.8kWh per Year Note: Operation is 24 hours a day, 6 days a week and 50 weeks a year. 115257Kvarh per Year Power Saving Kvar: 42.28 % 48730.91Kvarh per Year

5. Benefits from PowerBoss This machines can benefit greatly from Powerboss. The softstart function will reduce both starting current drawn by the motor and mechanical strain on bearings, gears, belts and etc. The reduction in starting current will also increase motor’s life. The optimization function will reduce the power supplied to the Motor without changing its torque and rpm. Reducing the power supplied to the motor will significantly reduce the heat, vibration and noise. Reducing wasted energy will also reduce the maintenance cost and production downtime.