1. Operational Excellence Quality and Customer Experience Operational Excellence Quality and Customer Experience SC18 Liaison report for SC6 Rick Faircloth Cameron

2. Operational Excellence Quality and Customer Experience Operational Excellence Quality and Customer Experience SC-18 Liaison Report TG-3: Definition of a Manufacturer TG-5: Q2 Guidance and Revision TG-6: Welding Requirements for API products TG-7: Lifecycle Management TG-8: Q1 Guidance document New : TG’s API Technical Report 18TR1

3. Operational Excellence Quality and Customer Experience Operational Excellence Quality and Customer Experience TG-3: Definition of a Manufacturer TG meet on the reformatted Technical Report and a few editorial changes will be made before submitting to ballot within SC-18 and to SC chairs Once finalized and approved within SC-18 the TR will be submitted to Monogram Program Board through CSOEM. Current plan is that this TR would be used where there are no requirements specified by the product spec

4. Operational Excellence Quality and Customer Experience Operational Excellence Quality and Customer Experience TG-5: Q2 Guidance and Revision Currently completed review of the beta site assessment questions Clarifications to be handled with a TR and possible revisions to document TG does not intend to “change” requirements but is focusing on clarifying requirements based on questions from beta site assessments

5. Operational Excellence Quality and Customer Experience Operational Excellence Quality and Customer Experience TG-6: Welding Requirements for API products Document is completed TG is formatting for ballot Will be issued as a TR under SC-18

6. Operational Excellence Quality and Customer Experience Operational Excellence Quality and Customer Experience TG-7: Lifecycle Management Draft comment ballot issued and closed 200 comments and overall there was nothing super substantial identified Comment ballot did include SC chairs to identify relevant products and attainable levels for those products Current document includes 5 LCM levels based on available product history and original manufacture Planned formal SC18 ballot by end of 2015

7. Operational Excellence Quality and Customer Experience Operational Excellence Quality and Customer Experience TG-8: Q1 Guidance document Initial draft balloted with one negative TG is now resolving comments

8. Operational Excellence Quality and Customer Experience Operational Excellence Quality and Customer Experience New TG’s Bolting – Review BSEE bolting report and requirements of Q1 and Q2 – TG9 has been formed and Chaired by Jimmy Hood of Freeport McMoran-update report to be issue at summer SC18 meeting ISO 9001:2015 – Review requirements of ISO 9001:2015 and identify potential changes to Q1 and Q2 – This TG was proposed but has been tabled until the Summer 2015 meeting

9. Operational Excellence Quality and Customer Experience Operational Excellence Quality and Customer Experience API Technical Report 18TR1 Guidance on Changes to API Q1, Ninth Edition, First Edition, has been published This document is written for experienced quality professionals seeking to implement the new requirements of API Q1, Ninth Edition (Q1, 9th). It provides an explanation of the changes from the previous edition associated with the requirements for conformance to API Q1, 9th.

10. Operational Excellence Quality and Customer Experience Operational Excellence Quality and Customer Experience API Technical Report 18TR1-cont.’ While Q1, 9th was created independently of ISO 9001:2008, the specification continues to satisfy those requirements as well as the supplemental requirements in API Q1, Eighth Edition (Q1, 8th). The formatting of Q1, 9th was updated to better align with API Q2, First Edition and to follow a chronological order in the production and delivery of the product