1. Safety in the Machine Shop Session 1

2. Shop Tools and Techniques2

3. 3 Safety on the Job Develop safe work habits Be neat, tidy and dress for job being performed Develop responsibility for personal safety and safety of fellow workers Think and work safely at all times

4. Shop Tools and Techniques4 Safety in the Shop Divided into two broad categories Practices that will prevent injury to workers Practices that will prevent damage to machines and equipment Other considerations Personal grooming Proper housekeeping Safe work practices Fire prevention

5. Shop Tools and Techniques5 Personal Grooming When Working in Machine Shop Always wear approved safety glasses Plain safety glasses with side shields Plastic safety goggles Face shields

6. Shop Tools and Techniques6 Personal Grooming When Working in Machine Shop Never wear loose clothing Short sleeves or rolled up Clothing should be hard and smooth (not loose fitting) Remove or tuck in all neckties Always tie shop apron in the back Remove wrist watches, ear-rings, nose- rings, and bracelets

7. Shop Tools and Techniques7 Personal Grooming When Working in Machine Shop Never wear gloves around rotating spindles Long hair must be protected by hair net or cap No canvas or open-toes sandals

8. Shop Tools and Techniques8 Housekeeping Stop machine before cleaning it Keep machine and hand tools clean Use brush and not cloth to remove chips Use cloth to clean oily surfaces Do not place tools and materials on drill press table, router table, table saw or the cnc table Note: Good housekeeping will never interfere with safety or efficiency!

9. Shop Tools and Techniques9 Housekeeping Keep floor free from oil and grease Sweep up metal chips on floor frequently Never place tools or materials on floor close to machine or around work area Return unused material and hardware to storage locker Never use compressed air to remove chips from machine, clothing or body

10. Shop Tools and Techniques10 Safe Work Practices Do NOT operate any machine or power tools with out the permission and adult present to supervise Before operating a machine, check that safety devices are in place and working Disconnect power and lock it off at switch box when making repairs to machine

11. Shop Tools and Techniques11 Safe Work Practices Make certain that cutting tool and work piece are properly mounted Keep hands away from moving parts Always motion of machine to stop before measuring, cleaning, or making any adjustments

12. Shop Tools and Techniques12 Safe Work Practices Never use rag near moving parts Never have more than one person operate machine at same time Notify Adult Supervisor immediately for any injury Remove all burrs and sharp edges with file before handling any work piece

13. Shop Tools and Techniques13 Safe Work Practices Do not lift heavy or difficult to handle objects by yourself Use safe lifting practices Assume squatting position (knees bent, back straight) Grasp work piece firmly Lift object by straightening legs (back straight)

14. Shop Tools and Techniques14 Safe Work Practices Be sure part is clamped securely to table Never start machine until sure that cutting tool and machine parts will clear table. Use scrap block of wood to protect table Use proper tool for job Always wear eye/ear protection at all times when working in or around others in shop

15. Shop Tools and Techniques15 Fire Prevention Always dispose of oily rags in proper metal containers Know location and operation of every fire extinguisher Know location of alarm and emergency cut off switch

16. Shop Tools and Techniques16 Fire Prevention Know location of nearest fire exit from building Know location of nearest fire-alarm box and its operating procedure Never use any welding or cutting torch for any reason. We are not allowed to use for this robotics competition

17. Specific Rules for Robotics Use only kit material No welding allowed Use only our tools and only the tools your trained and certified to use Clean up behind yourself Never use power tools without Adult supervisor present Shop Tools and Techniques17