1. BASINS 2.0 and The Trinity River Basin By Jóna Finndís Jónsdóttir

2. Why this project? Area of study What is BASINS 2.0 Running NPSM Conclusions Outline

3. Lets talk about TMDL My research project is a part of a Total Maximum Daily Loads project on the Trinity River Basin in east Texas BASINS 2.0 is sometimes used to view and process data regarding TMDL projects Since the product of my research project will be used in a similar way as the data in BASINS, a quick inspection of the program will give me a better overview over my research

4. And the study area is… Or actually a part of the Trinity River Basin… First I was looking at the West Fork Trinity River Above Bridgeport Reservoir, segment number 812 My next choice was Clear Fork Trinity River Above Lake Weatherford, segment number 833 The river network was to complicated for the non-point source model

5. Better Assessment Science Integrating Point and Nonpoint Sources The BASINS system is basically an Arc View project with some extra components. It consists of 4 An environmental database 4 Tools for data queries and report generation 4 Ability to produce input files for three models 4 The models, NPSM, Qual2e and Toxiroute 4 Post-processors for viewing of outputs from the models

6. The Database Base Cartographic Data 4 Hydrologic Unit Boundaries 4Major Roads 4Populated Place Locations 4Urbanized Areas 4State and County Boundaries 4EPA Regions Environmental Background Data 4Ecoregions 4State soil and Geographic Database 4Reach file 1 4Reach file 3 4Digital Elevation Model 4Land Use and Land Cover Environmental Monitoring Data 4 Water Quality Monitoring Stations and Data summaries 4Bacteria Monitoring Stations and Sata Summaries 4Water Quality Stations and Observation Data 4National Sediment Inventory Stations and Database 4Listing of Fish and Wildlife Advisories 4Flow Gage Sites 4Weather Station Sites 4Drinking Water Supply Sites 4Watershed Data Stations and Database 4Classified Shellfish Areas Point Source/Loading Data 4 Permit Compliance System, Sites & Computed Annual Loadings 4Industrial Facilities Discharge Sites & Pollutant Release data 4Superfund National Priority List Site 4Resource Conservation & Recovery Information System Sites 4Minerals Availability System /Mineral Industry Location System

7. Data Queries and Report Generation Target performs a broad-based assessment on the entire project area Assess is used to assess data on an individual watershed or a limited set of watersheds Data mining generates dynamic links between tables and maps for individual water quality stations or permitted facility discharges

8. The Stream Water Quality Models Two simple one-dimensional, steady-state models are are within BASINS, QUAL2E and TOXIROUTE BASINS creates input files for these models and has an built-in visualization for their output files. QUAL2E uses complex algorithms to simulate biochemical oxygen demand, dissolved oxygen, temperature, conservative and non-conservative substances Does not run in Windows NT TOXIROUTE calculates final and average concentration of general water quality constituents based on a dilution and first-order decay algorithm Will not be included in next edition of BASINS

9. Nonpoint Source Model NPSM NPSM is capable of integrating both:  Nonpoint source runoff and associated pollutant loadings  Point source discharges BASINS can create an input file for the model, which describes the attributes of a selected watershed The input file describes: The river reach network: length, slope and flow/water level curves (from Rf1) The land use of watersheds Point source discharges A separate data file includes weather data from certain weather stations In the NPSM-postprocessor, measured data can be compared to the output from the model

10. Running NPSM

11. Running NPSM (continued)

12. Output from NPSM USGS Flow Gage Station & Surface Water Quality Station

13. Conclusions The BASINS system is in most ways interesting and easy to use Except for the models The fact that QUAL2E is not compatible with Windows NT should be presented in a more obvious way than it is (one sentence in the users guide) NPSM should give the user some error messages or instructions when the model can not run due to some mistakes in the input

14. Questions?