Presentation is loading. Please wait.

Presentation is loading. Please wait.

BGP Point-to-Multipoint LSP draft-satoru-mpls-bgp-multipoint-02 Satoru Matsushima Tetsuya Murakami Kenichi.

Similar presentations


Presentation on theme: "BGP Point-to-Multipoint LSP draft-satoru-mpls-bgp-multipoint-02 Satoru Matsushima Tetsuya Murakami Kenichi."— Presentation transcript:

1 BGP Point-to-Multipoint LSP draft-satoru-mpls-bgp-multipoint-02 Satoru Matsushima (satoru@ft.solteria.net) Tetsuya Murakami (tmurakam@cisco.com) Kenichi Nagami (nagami@inetcore.com)

2 Motivation Expand P2MP-LSP enabled area –Cover non-TE area –Cover non-MPLS area and inter-work w/ MPLS p2mp-lsp –Inter-AS/Domain p2mp-lsp BGP is applicable for these motivations

3 Requirements Discover/Notify P2MP capable branch and egress nodes –Applicable for any P2MP signaling protocol –Inter-Domain P2MP LSP P2MP LSP can be used over P2P/MP2P LSP –Migration and co-existing scenarios Policy based P2MP tree decision –Per LSP basis

4 Overview of BGP for P2MP LSP Ingress LSR-a Branch LSR-b Branch LSR-c Egress LSR-d Advertising P2MP-LSP=L Advertising P2MP-LSP=L w/ brach-LSR-b Advertising P2MP-LSP=L w/ branch-LSR-b and c Joined P2MP-LSP=L Upstream LSR=c Label = A Joined P2MP-LSP=L Upstream LSR=b Label = B Joined P2MP-LSP=L Upstream LSR=a Label = C

5 Sender Receiver1Receiver2 Receiver3 BGP P2MP-LSP example Branch LSR2 Ingress LSR1 LSR3 Egress LSR5 Branch LSR4 Egress LSR6 Egress LSR7 P2P-LSP P2MP Instance

6 Proposal New BGP attribute –P2MP_ID (ext community) Identify the P2MP_LSP –P2MP_BRANCH_LIST (ext community) Indicate the branches which traverse P2MP_LSP Detecting and protecting loop –P2MP_IMPORTED_BRANCH (ext community) Indicate the upstream branch of downstream LSR (JOIN) –NLRI Distinguish ingress and each branches uniquely even if in same LSP Label distribution from downstream LSR

7 Data plane of BGP P2MP P2MP instance –The entity of replication and stitching P2P/MP2P LSP –BGP makes policy of which is upstream/downstream for each P2MP LSP Other P2MP signaling can be used –Data plane is separated as P2MP instance –RSVP and LDP may use BGP as find p2mp capable node –Inter-work w/ BGP P2MP-LSP

8 Current status Deployment –Current MPLS network co-existing w/ this solution is working –Validating attribute and behavior Problem –Defining a NLRI for P2MP AFI/SAFI is needed Currently, vpnv4 is used to distinguish p2mp LSP To keep bgp modularity and protecting miss behavior w/ MPLS-VPN

9 Next step Good start point to develop BGP based P2MP discussion –Interest for this work? Adopt as WG item? Please send your comment to the list


Download ppt "BGP Point-to-Multipoint LSP draft-satoru-mpls-bgp-multipoint-02 Satoru Matsushima Tetsuya Murakami Kenichi."

Similar presentations


Ads by Google